Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 264-966-7 | CAS number: 64611-73-0
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://echa.europa.eu/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_toxicological-information.png)
Endpoint summary
Administrative data
Key value for chemical safety assessment
Genetic toxicity in vitro
Description of key information
Ames - OECD TG 471 - nitroreductase deficient strains - key study - read-across - with and without S9 - positive.
Ames - OECD TG 471 - supporting study - read-across - with and without S9 - positive.
HPRT - OECD TG 476 - key study - read-across - negative.
Micronucleus - OECD TG 487 - key study - read-across - negative.
Link to relevant study records
- Endpoint:
- in vitro cytogenicity / micronucleus study
- Type of information:
- other: read-across from supporting substance (structural analogue or surrogate)
- Adequacy of study:
- key study
- Study period:
- 2015-11-17 to 2016-05-18
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- guideline study without detailed documentation
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 487 (In vitro Mammalian Cell Micronucleus Test)
- Version / remarks:
- 26 Sep 2014
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- other: In vitro Mammalian Cell Micronucleus Test, No B.49; No L 193
- Version / remarks:
- Commission Regulation (EC) No 640/2012 of 06 July 2012
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Type of assay:
- in vitro mammalian cell micronucleus test
- Species / strain / cell type:
- Chinese hamster Ovary (CHO)
- Details on mammalian cell type (if applicable):
- CELL LINE AND STORAGE
The V79 cell line is a permanent cell line derived from the Chinese hamster and has a
− high proliferation rate (doubling time of about 12 - 14 hours),
− high plating efficiency (≥ 90 %),
− stable karyotype (modal number of 22 chromosomes).
The V79 cell line has shown its suitability to detect aneugenic effects in the Micronucleus test in vitro either in the absence and presence of cytochalasin B.
Stocks of the V79 cell line (1-mL portions) were maintained at -196 °C in liquid nitrogen using 7 % (v/v) dimethyl sulfoxide (DMSO) in culture medium as a cryoprotectant. Each batch used for the cytogenetic experiments was checked for
− mycoplasma contamination,
− karyotype stability,
− plating efficiency (=colony forming ability) incl. vital staining.
CULTURE MEDIA
MEM (minimal essential medium with Earle's salts) containing a L-glutamine source supplemented with
− 10 % (v/v) fetal calf serum (FCS)
− 1 % (v/v) penicillin/streptomycin (10000 IU / 10000 μg/mL)
− 1 % (v/v) amphotericine B (250 μg/mL)
CELL CULTURE
Deep-frozen cell stocks were thawed at 37 °C in a water bath, and volumes of 0.5 mL were transferred into 25 cm² plastic flasks containing about 5 mL MEM supplemented with 10 % (v/v) FCS. Cells were grown with 5 % (v/v) CO2 at 37 °C and ≥ 90 % relative humidity and subcultured twice weekly. Cell monolayers were suspended in culture medium after detachment with 0.25 % (w/v) trypsin solution.
CELL CYCLE AND HARVEST TIME
The cell cycle of the untreated V79 cells lasts for about 12 - 14 hours under the selected culture conditions (last measurement based on the BrdU method of Speit et al.: 12 hours; May 2014). Thus, a harvest time of 24 hours is about 2 times the normal cell cycle length.
V79 cells are an asynchronous cell population, i.e. at the time of test substance treatment there are different cell stages (G1-, S-, G2-phase and mitosis). Since the effect on these cell stages may vary for different test substances, more than one harvest time after treatment may be appropriate.
Furthermore, substance-induced mitotic delay may considerably delay the first post-treatment mitosis. Therefore, delayed harvest times (e.g. 44 hours) and prolonged exposure periods (e.g. 24 hours treatment) may be required for the detection of several substances. - Cytokinesis block (if used):
- actin polymerisation inhibitor cytochalasin B
- Metabolic activation:
- with and without
- Metabolic activation system:
- S9 fraction from phenobarbital and β-naphthoflavone induced Wistar rat livers
- Test concentrations with justification for top dose:
- PRETEST
- Justification: Following the requirements of the current OECD Guideline 487 a test substance with defined composition should be tested up to a maximum concentration of 2 mg/mL, 2 μL/mL or 10 mM, whichever is the lowest. When the test substance is not of defined composition, e.g. substance of unknown or variable composition, complex reaction products or biological materials (socalled UVCBs), or environmental extracts, the top concentration should be higher to increase the concentration of each of the components (e.g. 5 mg/mL). In case of toxicity, the top concentration should produce 55 ± 5 % cytotoxicity: reduction of the proliferation index (CBPI) to 45 ± 5 % of the concurrent vehicle control. For relatively insoluble test substances only one concentration should be tested showing turbidity or precipitation in culture medium at the end of exposure period. In the pretest for toxicity based on the content of the Cr-complex of the test substance in the 2600 μg/mL total substance was used as top concentration.
- Concentrations, with and without S9 mix: 20.3, 40.6, 81.3, 162.5, 325.0, 650.0, 1300.0, 2600.0 μg/mL
MAIN TEST
- Justification: The concentrations tested in this study were selected in accordance with the requirements set forth in the test guidelines and based on the results of a preliminary range finding test (experimental conduct with records and documentation in general accordance with the GLP principles).
- Concentrations 1ST Experiment, with and without S9 mix, 24 hour preparation interval: 5.00, 10.00, 20.00, 40.00, 80.00, 160.00 μg/mL
- Concentrations 2ST Experiment, without S9 mix, 24 hour preparation interval: 10.00, 20.00, 40.00, 80.00, 160.00 μg/mL
- Concentrations 2ST Experiment, with and without S9 mix, 44 hour preparation interval: 10.00, 20.00, 40.00, 80.00, 160.00 μg/mL - Vehicle / solvent:
- PRETEST
- Vehicle used: culture medium
- Justification for choice of vehicle: Culture medium was the only feasible vehicle to reach a maximum concentration of 2600 μg/mL (homogeneous suspension) due to physico-chemical properties.
MAIN TEST
- Vehicle used: DMSO
- Justification for choice of vehicle: In the pretest, precipitates were found in all exposed test groups from the lowest applied concentration of 20 μg/mL onward. Following an additional solubility test with a lower top concentration it was decided to use dimethyl sulfoxide (DMSO) as vehicle in the main experiments of this study. - Untreated negative controls:
- yes
- Remarks:
- without vehicle and S9 mix
- Negative solvent / vehicle controls:
- yes
- Remarks:
- DMSO
- True negative controls:
- no
- Positive controls:
- yes
- Positive control substance:
- cyclophosphamide
- ethylmethanesulphonate
- Details on test system and experimental conditions:
- EXPERIMENTAL PROCEDURE
- Method of application: in medium
- Preparation of test cultures: The stocks of cells (1.0-mL portions) were thawed at 37 °C in a water bath. 0.5 mL were pipetted into 25 cm² cell culture flasks containing 5 mL MEM (incl. 10 % [v/v] FCS). The flasks were subsequently incubated at 37 °C, 5 % (v/v) CO2 and relative humidity of ≥ 90 % until they have reached confluency of at least 50 % (duration about 2 – 4 days). The medium was replaced after about 24 - 30 hours to remove any dead cells. Prior to the preparation of the final test cultures, the cells may run through max. 15 routine passages. After the "last" routine passage, there was another passage to prepare test cultures.
- Seeding of the cells: A single cell suspension with the required cell count (3 - 5 E+5 cells per culture, depending on the schedule) was prepared in MEM incl. 10 % (v/v) FCS. 5 mL cell suspension was transferred into 25 cm² cell culture flasks using a dispenser. Subsequently, the test cultures were incubated at 37 °C, 5 % (v/v) CO2 and ≥ 90 % relative humidity. The cultures were visually checked for attachment and viability before treatment of the test cultures.
- Definition of test cultures: A test group consists of two separately treated flasks (Culture A and B). Each, two slides were prepared and, thus, four slides were available for scoring of each test group, in general.
- Treatment of test cultures: After the attachment period, about 20 - 24 hours after seeding, the medium was removed from the flasks and the treatment medium was added. The cultures were incubated for the respective exposure period at 37 °C, 5 % (v/v) CO2 and ≥ 90 % relative humidity.
- At the end of the 4-hour exposure period, the medium was removed and the cultures were rinsed twice with 5 mL HBSS (Hanks Balanced Salt Solution). Subsequently, 5 mL MEM (incl. 10 % [v/v] FCS) supplemented with CytB (final concentration: 3 μg/mL; stock: 0.6 mg/mL in DMSO; AppliChem, Cat.No. A7657) was added and the cultures were incubated at 37 °C, 5 % (v/v) CO2 and ≥ 90 % relative humidity for the respective recovery time. In the case of 24-hour continuous exposure, CytB was added to the treatment medium at start of treatment, and cell preparation was started directly at the end of exposure. At 44 hours preparation interval in the presence of S9 mix CytB was added 24 hours before preparation of the cultures.
DURATION
Exposure-, Recovery- and Harvest time: see Table 1.
SPINDLE INHIBITOR
actin polymerisation inhibitor cytochalasin B (CytB)
STAIN
4’,6-diamidino-2-phenylindole dihydrochloride and propidium iodide
NUMBER OF REPLICATIONS
2
METHODS OF SLIDE PREPARATION AND STAINING TECHNIQUE USED
- Cell harvest and preparation of slides: The cells were prepared based on the method described by Fenech, 1993. Just before preparation the culture medium was completely removed. Single cell suspensions were prepared from each test group by enzymatic dissociation. Then, the cell number per flask of each cell suspension was determined using a cell counter (CASY®, Roche Applied Science, Mannheim, Germany). Subsequently, 5xE+4 cells per slide were centrifuged at 600 rpm for 7 minutes onto labelled slides using a Cytospin centrifuge (Cellspin I, Tharmac, Waldsolms, Germany). At least two slides per flask were prepared. In the case of strongly reduced cell numbers below 10x1E4 cells per flask no slides were prepared. After drying, the slides were fixed in 90 % (v/v) methanol for 10 minutes.
- Staining: Before scoring, the slides were stained with a mixture of 4’,6-diamidino-2-phenylindole dihydrochloride (DAPI; stock: 5 mg/mL; Sigma-Aldrich, Cat.No. D9542) and propidium iodide (stock: 5 mg/mL; Sigma-Aldrich, Cat.No. P4170) in Fluoroshield™ (Sigma-Aldrich, Cat.No. F6182) at a concentration of 0.25 μg/mL each. By the use of the combination of both fluorescence dyes it can be differentiated between DNA (DAPI; excitation: 350 nm, emission: 460 nm) and cytoplasm (PI; excitation: 488 nm, emission: 590 nm).
NUMBER OF CELLS EVALUATED
At least 1000 binucleated cells per culture, in total at least 2000 binucleated cells per test group
CRITERIA FOR MICRONUCLEUS IDENTIFICATION
see 'Evaluation criteria'.
DETERMINATION OF CYTOTOXICITY
- Method: relative population doubling (RPD), Proliferation Index (CBPI)
- Any supplementary information relevant to cytotoxicity (RPD): The RPD takes into account either cytotoxicity or cell proliferation over the whole incubation period until slide preparation when determination of cell numbers occurs. However, in the main experiments supplementation of culture medium with CytB blocks cell division. Thus, under the experimental conditions described, RPD is an indication of cell viability mainly for the time period before addition of CytB.
OTHER EXAMINATIONS:
- Cell morphology: At the end of the treatment period, all test groups were examined microscopically with regard to cell morphology, which is a further indication for cytotoxicity.
- pH value: Changes in the pH were apparent by a color change of the indicator in the culture medium (phenol red: normal range: about pH 6.7 - 8.3). The pH was measured at least for the top concentration and for the vehicle control with and without S9 mix.
- Osmolality: Osmolality was measured at least for the top concentration and for the vehicle control with and without S9 mix.
- Solubility: Test substance precipitation was checked immediately after start of treatment of the test cultures (macroscopically) and at the end of treatment (macroscopically / microscopically).
OTHER:
- Assessment of the slides: Dose selection for scoring for cytogenetic damage was based on the results of a previous check on slide and/or cell quality, number of analysable cells and nuclear fragmentation. - Evaluation criteria:
- ACCEPTANCE CRITERIA
The in vitro micronucleus assay is considered valid if the following criteria are met:
- The quality of the slides allowed the evaluation of a sufficient number of analysable cells both in the control groups (vehicle/positive) and in at least three exposed test groups.
- Sufficient cell proliferation was demonstrated in the vehicle control.
- The number of cells containing micronuclei in the vehicle control was within the range of the laboratory’s historical negative control data (95 % control limit). Weak outliers can be judged acceptable if there is no evidence that the test system is not “under control”.
- The positive control substances both with and without S9 mix induced a distinct, statistically significant increase in the number of micronucleated cells in the expected range.
ASSESSMENT CRITERIA
A test substance is considered to be clearly positive if the following criteria are met:
• A statistically significant increase in the number of micronucleated cells was obtained.
• A dose-related increase in the number of cells containing micronuclei was observed.
• The number of micronucleated cells exceeded both the value of the concurrent vehicle control and the range of our laboratory’s historical negative control data (95% control limit)
A test substance is considered to be clearly negative if the following criterion is met:
• Neither a statistically significant nor dose-related increase in the number of cells containing micronuclei was observed under any experimental condition.
• The number of micronucleated cells in all treated test groups was close to the concurrent vehicle control value and within the range of our laboratory’s historical negative control data (95 % control limit). - Statistics:
- The statistical evaluation of the data was carried out using an appropriate statistical analysis. The proportion of cells containing micronuclei was calculated for each test group. A comparison of the micronucleus rates of each test group with the concurrent vehicle control group was carried out for the hypothesis of equal proportions (i.e. one-sided Fisher's exact test).
- Key result
- Species / strain:
- Chinese hamster Ovary (CHO)
- Metabolic activation:
- with and without
- Genotoxicity:
- negative
- Cytotoxicity / choice of top concentrations:
- no cytotoxicity, but tested up to precipitating concentrations
- Vehicle controls validity:
- valid
- Untreated negative controls validity:
- valid
- Positive controls validity:
- valid
- Additional information on results:
- TEST-SPECIFIC CONFOUNDING FACTORS
- Effects of pH and osmolality: Osmolality and pH values were not influenced by test substance treatment.
- Precipitation: Test substance precipitation in culture medium at the end of exposure period was observed in the absence of S9 mix at 80 μg/mL and above in the 1st Experiment and at 160 μg/mL in the 2nd Experiment. In addition, in the presence of metabolic activation precipitates in culture medium occurred at 10 μg/mL and above in both experiments (macroscopical assessment).
RANGE-FINDING/SCREENING STUDIES
The test substance was poorly soluble in all commonly used vehicles. Thus, test substance suspensions in culture medium were used in the pretest. Precipitation in culture medium was observed from the lowest applied concentration of 20.3 μg/mL onward 4 and 24 hours after start of exposure. No cytotoxicity was observed in the pretest when tested up to the highest required concentration of 2600 μg/mL. Based on the experience on solubility of the test substance in other in vitro test systems (internal data) the vehicle DMSO was used in both main experiments. However, precipitates in culture medium were still observed in both experiments. Therefore, in the main experiments of this micronucleus study concentrations at the border of solubility in culture medium were tested for cytogenetic damage.
GENOTOXICITY - MICRONUCLEUS ANALYSIS
In this study, no biologically relevant increase in the number of micronucleated cells was observed either without S9 mix or after the addition of a metabolizing system. In both experiments in the absence and presence of metabolic activation after 4 and 24 hours treatment with the test substance the values (0.3 – 0.9 % micronucleated cells) were close to the concurrent vehicle/negative control values (0.3 - 0.8 % micronucleated cells) and within the range of the 95 % control limit of our historical negative control data (0.0 - 1.0 % micronucleated cells).
Besides, in the 1st Experiment in the absence of S9 mix the micronucleus rates were concentration-related increased at 40, 80 and 160 μg/mL (0.5 %, 0.6 % and 0.9 % micronucleated cells, respectively). However, all values were clearly within the range of the 95 % control limit of our historical negative control data range and, therefore, this finding has to be regarded as biologically irrelevant.
The positive control substances ethyl methanesulfonate and cyclophosphamide induced statistically significant increased micronucleus frequencies in both independently performed experiments in at least one positive control group each. In this study, in the absence and presence of metabolic activation the frequency of micronucleated cells (1.6– 5.9 % micronucleated cells) was above the range of our historical negative control data (0.1 - 1.5 % micronucleated cells) and close to or within our historical positive control data range (2.3 – 13.8 % micronucleated cells). Unfortunately, in the 1st Experiment in the absence of S9 mix the positive control EMS did not show the expected increase at 500 μg/mL (1.3 % micronucleated cells). But the second positive control group of 600 μg/mL EMS led to the expected statistically significant increase of the micronucleus rate (2.3 % micronucleated cells).
CYTOTOXICITY - RELATIVE POPULATION DOUBLING
In both main experiments in the absence and presence of S9 mix no cytotoxicity indicated by reduced RPD of below 50 % of control was observed up to the highest applied test substance concentrations. These values were calculated based on cell numbers determined at the end of each experiment. In the pretest the parameter RPD is a valuable indicator of test substance toxicity. However, in the main experiments due to the use of the cytokinesis block method it is a measure of cell proliferation only until addition of cytochalasin B to the cultures. But, it also gives an useful information on cell loss due to test substance exposure.
CYTOTOXICITY - PROLIFERATION INDEX
No clearly reduced proliferative activity was observed either after 4 hours exposure interval in the absence and presence of S9 mix or after 24 hours continuous test substance treatment in the test groups scored for cytogenetic damage. However, slightly elevated cytostasis indicated by reduction of the CBPI was obtained in the absence of S9 mix at 160 μg/mL (25.4 % of control) in the 2nd Experiment.
Due to the use of DMSO either as vehicle for the test substance or as solvent for cytochalasin B a final concentration of 1.5 % (v/v) DMSO was reached in the treatment medium in the 2nd Experiment at 24 hours continuous treatment in the absence of S9 mix. Therefore, a negative control culture supplemented with cytochalasin B (0.5 % [v/v] DMSO) only was run in parallel. This culture showed only a slightly higher CBPI (absolute value: 2.19) than the vehicle control (absolute value: 2.12). Thus, based on these data it was confirmed that the applied DMSO concentration had no detrimental impact on the outcome of this experimental part.
CELL MORPHOLOGY
Cell attachment/morphology was adversely influenced (grade > 2) only in the 1st Experiment in the presence of metabolic activation at 160 μg/mL. - Conclusions:
- Negative
- Endpoint:
- in vitro gene mutation study in mammalian cells
- Type of information:
- other: read-across from supporting substance (structural analogue or surrogate)
- Adequacy of study:
- key study
- Study period:
- 2015-11-30 to 2016-05-04
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 476 (In Vitro Mammalian Cell Gene Mutation Test)
- Version / remarks:
- 28 Jul 2015
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU Method B.17 (Mutagenicity - In Vitro Mammalian Cell Gene Mutation Test)
- Version / remarks:
- 30 May 2008
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EPA OPPTS 870.5300 - In vitro Mammalian Cell Gene Mutation Test
- Version / remarks:
- Aug 1998
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Type of assay:
- other: in vitro gene mutation test in mammalian cells
- Target gene:
- HPRT locus
- Species / strain / cell type:
- Chinese hamster Ovary (CHO)
- Details on mammalian cell type (if applicable):
- CELL LINE AND STORAGE
The CHO (Chinese hamster ovary) cell line is a permanent cell line derived from the Chinese hamster and has a
- high proliferation rate (doubling time of about 12 - 16 hours)
- high plating efficiency (about 90 %)
- karyotype with a modal number of 20 chromosomes.
Stocks of the CHO cell line (1-mL portions) are maintained at -196 °C in liquid nitrogen using 7 % (v/v) DMSO in culture medium as a cryoprotectant. Each batch used for mutagenicity testing was checked for mycoplasma contamination.
CULTURE MEDIA
- All media were supplemented with 1 % (v/v) penicillin/streptomycin (stock solution: 10000 IU / 10000 μg/mL) and 1 % (v/v) amphotericine B (stock solution: 250 μg/mL)
- Culture medium for the 1st Experiment: Ham's F12 medium containing stable glutamine and hypoxanthine (Biochrom; Cat. No. FG 0815) supplemented with 10 % (v/v) fetal calf serum (FCS).
- Culture medium for the 2nd Experiment: Ham's F12 medium containing stable glutamine and hypoxanthine (PAN Biotech; Cat. No.P04-15500) supplemented with 10 % (v/v) fetal calf serum (FCS).
- Treatment medium (without S9 mix): Ham's F12 medium containing stable glutamine and hypoxanthine supplemented with 10 % (v/v) FCS.
- Treatment medium (with S9 mix): Ham's F12 medium containing stable glutamine and hypoxanthine.
- Pretreatment medium ("HAT" medium): Ham's F12 medium supplemented with hypoxanthine (13.6 x 1E-3 mg/mL), aminopterin (0.18 x 1E-3 mg/mL), thymidine (3.88 x 1E-3 mg/mL) and 10% (v/v) FCS
- Selection medium ("TG" medium): Ham's F12 medium containing stable glutamine and hypoxanthine supplemented with 6-thioguanine (10 μg/mL) and 10 % (v/v) fetal calf serum (FCS)
CELL CULTURE
For cell cultivation, deep-frozen cell suspensions were thawed at 37 °C in a water bath, and volumes of 0.5 mL were transferred into 25 cm² plastic flasks containing about 5 mL Ham's F12 medium including 10 % (v/v) FCS. Cells were grown with 5 % (v/v) CO2 at 37 °C and ≥ 9 0 % relative humidity up to approximate confluence and subcultured twice weekly (routine passage in 75 cm² plastic flasks).
ROUTINE PASSAGE (preparation of a single cell suspension in 75 cm² flask)
- Cell medium was removed and cells were washed with 5 mL PBS or HBSS (both Ca-Mg-free).
- Cells were trypsinized with 2 mL HBSS (Hanks balanced salt solution; Ca-Mg-free) and 2 mL trypsin (0.25 % [w/v]) to remove the cells from the bottom of the plastic flasks.
- This reaction was stopped by adding 6 mL culture medium incl. 10 % (v/v) FCS.
- Cells were pipetted up and down to separate them and to prepare a homogeneous single cell suspension.
- Cells were counted in a counting chamber or using a cell counter.
- Cell suspensions were diluted with complete culture medium to the desired cell count. - Metabolic activation:
- with and without
- Metabolic activation system:
- S9 fraction from phenobarbital (i.p.) and β-naphthoflavone (oral) induced Wistar rat livers
- Test concentrations with justification for top dose:
- PRETEST:
- Justification: Following the requirements of the current international guidelines and the ICPEMC Task Group (5) a test substance should be tested up to a maximum concentration of 2 mg/mL, 2 μL/mL or 10 mM, whichever is the lowest. In case of toxicity, the top dose should result in approximately 10 - 20 % relative survival (relative cloning efficiency), but not less than 10%. For relatively insoluble test substances at least one concentration should be scored showing no precipitation in culture medium at the end of the exposure period. In the pretest for toxicity based on the purity of the test substance 6500.0 μg/mL was used as top concentration.
- concentrations with and without S9 mix [4 hour exposure]: 25.4, 50.8, 101.6, 203.1, 406.3, 812.5, 1625.0, 3250.0, 6500.0 µg/mL
MAIN TESTS
- justification: Doses were based on the data and the observations from the pretest and current guidelines were taking into account.
- concentrations Experiment 1, with and without S9 mix [4 hour exposure]: 2.5, 5.0, 10.0, 20.0, 40.0, 80.0, 160.0 µg/mL
- concentrations Experiment 2, with and without S9 mix [4 hour exposure]: 6.3, 12.5, 25.0, 50.0, 100.0, 160.0 µg/mL - Vehicle / solvent:
- PRETEST
- Vehicle: culture medium
- Justification for choice of vehicle: it was the only feasible vehicle to reach a maximum concentration of 6500 μg/mL (homogeneous suspension) due to physico-chemical properties.
MAIN TEST
- Vehicle: DMSO
- Justification for choice of vehicle: in the pretest, precipitates were found in all exposed test groups from the lowest applied concentration of 25.4 μg/mL onward. DMSO was chosen based on an additional solubility test with a lower top concentration. - Untreated negative controls:
- yes
- Negative solvent / vehicle controls:
- yes
- True negative controls:
- no
- Positive controls:
- yes
- Positive control substance:
- 7,12-dimethylbenzanthracene
- ethylmethanesulphonate
- Details on test system and experimental conditions:
- METHOD OF APPLICATION: in medium
- Test substance preparation: The substance was dissolved in DMSO. The test substance was weighed and topped up with the chosen vehicle to achieve the required concentration of the stock solution. To achieve a solution of the test substance in the vehicle, the test substance preparation was shaken thoroughly. The further concentrations were diluted according to the planned doses. All test substance solutions were prepared immediately before administration.
- Preparation of test cultures: Cell stocks (1.0-mL portions) stored in liquid nitrogen were thawed at 37 °C in a water bath. 0.5 mL of stock cultures were pipetted into 25 cm² plastic flasks containing 5 mL Ham's F12 medium (incl. 10 % [v/v] FCS). After 24 hours, the medium was replaced to remove any dead cells. At least 2 passages were performed before cells were taken for the experiment. A further passage was also necessary in order to prepare test cultures.
- Pretreatment of cells with "HAT" medium: During the week prior to treatment, any spontaneous HPRT-deficient mutants were eliminated by pretreatment with "HAT" medium. 3 – 5E+5 cells were seeded per flask (75 cm²) and incubated with "HAT" medium for 3 - 4 days. A subsequent passage in Ham's F12 medium incl. 10 % (v/v) FCS was incubated for a further 3 - 4 days.
- Attachment period: For each test group, about 20E+6 logarithmically growing cells per flask (300 cm²) were seeded into about 40 mL Ham's F12 medium supplemented with 10 % (v/v) FCS and incubated for about 20 - 24 hours.
- Exposure period: After the attachment period, the medium was removed from the flasks and the treatment medium was added. The cultures were incubated for the respective exposure period at 37 °C, 5 % (v/v) CO2 and ≥ 90 % relative humidity.
- Expression period: The exposure period was completed by rinsing several times with HBSS. This was directly followed by the 1st passage in which 2E+6 cells were seeded in 20 mL medium (in 175 cm² flasks). The flasks were left to stand in the incubator for about 3 days at 37 °C, relative humidity of ≥ 90 % and 5 % (v/v) CO2 atmosphere. After about 3 days, the cells were passaged a 2nd time in 175 cm² flasks with 2E+6 cells. After the expression period the cells were transferred into selection medium (3rd passage).
- Selection period: For selection of the mutants, two 175 cm² flasks with 2E+6 cells each from every treatment group, if possible, were seeded in 20 mL selection medium ("TG" medium) at the end of the expression period. The flasks were returned to the incubator. At the end of the selection period, the medium was removed and the remaining colonies were fixed with methanol, stained with Giemsa and counted.
DURATION
- Preincubation period: 20 - 24 hours after seeding
- Exposure duration: 4 hours
- Expression time: 7 – 9 days
- Selection time: 6 – 7 days
- Fixation time: from day 16
SELECTION AGENT: TG medium
STAIN: Giemsa
NUMBER OF REPLICATIONS: 2
CYTOTOXICITY DETERMINATION
- Cloning efficiency (CE) (pre-experiment): The determination of the cloning efficiency in the pre-experiment was similar to that described for the determination of the cloning efficiency 1 (CE1) in the main experiments, excepting that 1E+6 cells were seeded in 25 cm² flasks coated with 5 mL Ham´s F12 medium incl. 10 % (v/v) FCS. After test substance incubation, 200 cells were transferred into new Ham´s F12 medium incl. 10 % (v/v) FCS. Due to technical reasons in the pretest no cytotoxicity data were obtained.
- Cloning efficiency 1 (CE1; survival): For the determination of the influence of the test substance after the exposure period, about 200 cells per concentration were reserved from the treated cells and were seeded in 25 cm² flasks and coated with 5 mL Ham's F12 medium incl. 10% (v/v) FCS in parallel to the 1st passage directly after test substance incubation.
- Cloning efficiency 2 (CE2; viability): For the determination of the mutation rate after the expression period, two aliquots of about 200 cells each were reserved from the transfer into selection medium (after 7 – 9 days) and seeded in two flasks (25 cm2) containing 5 mL Ham's F12 medium incl. 10% (v/v) FCS. In all cases, after seeding the flasks were incubated for 5 - 8 days to form colonies. These colonies were fixed, stained and counted. The absolute and relative cloning efficiencies (%) were calculated for each test group
CHECK OR DETERMINATION OF FURTHER PARAMETERS
- pH: the pH was measured at least for the top concentrations and for the vehicle controls with and without S9 mix.
- Osmolality: Osmolality was measured in at least the top concentrations and the vehicle controls with and without S9 mix.
- Solubility: Test substance precipitation was assessed immediately after dosing the test cultures and at the end of treatment.
- Cell morphology: The test cultures of all test groups were examined microscopically for cell morphology and cellular attachment at the end of the exposure period, which is a further indication for cytotoxicity. - Evaluation criteria:
- ACCEPTANCE CRITERIA
The HPRT assay is considered valid if the following criteria are met:
- The absolute cloning efficiencies of the negative/vehicle controls should not be less than 50 % (with and without S9 mix).
- The background mutant frequency in the negative/vehicle controls should be within our historical negative control data range (95 % control limit). Weak outliers can be judged acceptable if there is no evidence that the test system is not “under control”.
- The positive controls both with and without S9 mix should induce a distinct, statistically significant increase in mutant frequencies in the expected range.
ASSESSMENT CRITERIA
A test substance is considered to be clearly positive if all following criteria are met:
- A statistically significant increase in mutant frequencies is obtained.
- A dose-related increase in mutant frequencies is observed.
- The corrected mutation frequencies (MFcorr.) exceeds both the concurrent negative/vehicle control value and the range of the laboratory’s historical negative control data (95 % control limit).
Isolated increases of mutant frequencies above our historical negative control range or isolated statistically significant increases without a dose-response relationship may indicate a biological effect but are not regarded as sufficient evidence of mutagenicity. A test substance is considered to be clearly negative if the following criteria are met:
- Neither a statistically significant nor dose-related increase in the corrected mutation frequencies is observed under any experimental condition.
- The corrected mutation frequencies in all treated test groups is close to the concurrent vehicle control value and within the range of the laboratory’s historical negative control data (95% control limit). - Statistics:
- - An appropriate statistical trend test (MS EXCEL function RGP) was performed to assess a possible dose-related increase of mutant frequencies. The used model is one of the proposed models of the International Workshop on Genotoxicity Test procedures Workgroup Report. The dependent variable was the corrected mutant frequency and the independent variable was the concentration. The trend was judged as statistically significant whenever the one-sided p-value (probability value) was below 0.05 and the slope was greater than 0.
- In addition, a pair-wise comparison of each test group with the vehicle control group was carried out using one-sided Fisher's exact test with Bonferroni-Holm correction. The calculation was performed using R. - Key result
- Species / strain:
- Chinese hamster Ovary (CHO)
- Metabolic activation:
- with and without
- Genotoxicity:
- negative
- Cytotoxicity / choice of top concentrations:
- no cytotoxicity, but tested up to precipitating concentrations
- Vehicle controls validity:
- valid
- Untreated negative controls validity:
- not applicable
- Positive controls validity:
- valid
- Additional information on results:
- TEST-SPECIFIC CONFOUNDING FACTORS
Osmolality and pH values were not influenced by test substance treatment.
RANGE-FINDING/SCREENING STUDIES:
In the pretest the pH value was not influenced by the addition of the test substance preparation to the culture medium at the concentrations measured. In addition, a homogeneous suspension of the test substance in the vehicle HAM´s F12 was obtained in the stock preparation (Test group: 6500 μg/mL) as well as in all applied concentrations down to 25.4 μg/mL. Thus, no soluble test substance concentration was obtained. Due to techniqual reasons, only the results of the cell counting during the 1st passage after test substance incubation could be used for dose selection.
CELL MORPHOLOGY
Only in the 1st Experiment in the absence of S9 mix, after 4 hours treatment in the morphology and attachment of the cells was adversely influenced (grade > 2) in the highest applied concentration (160.0 μg/mL).
MUTANT FREQUENCY
In this study, no relevant increase in the number of mutant colonies was observed with or without S9 mix. In both experiments after 4 hours treatment with the test substance the values for the corrected mutation frequencies (MFcorr.: 0.00 – 9.79 per E+6 cells) were close to the respective vehicle control values (MFcorr.: 1.44 – 8.29 per E+6 cells) and close to or within the range of the 95% control limit of our historical negative control data (MFcorr.: 0.00 – 6.84 per E+6 cells). However, in the 1st Experiment in the presence of S9 mix the values for the corrected mutation frequencies in test group 40.0 μg/mL (MFcorr.: 8.89 per E+6 cells) and 160 μg/mL (MFcorr.: 9.79 per E+6 cells) were slightly above the range of the 95% control limit and slightly above the concurrent vehicle control (MFcorr.: 8.29 per E+6 cells). Nevertheless, the values were neither statistically significant nor dose-related increased. In addition, the results obtained in the 1st Experiment in the presence of S9 mix could not be confirmed in the 2nd Experiment.
In all experiments, no statistically significant dose-related increase in the mutant frequency was found in cells after 4 hours of treatment either in the absence or presence of S9 mix.
However, in the 1st Experiment in the absence of S9 mix the values for the corrected mutation frequencies in test group 40.0 μg/mL (MFcorr.: 6.27per E+6 cells) and 80 μg/mL (MFcorr.: 7.75 per E+6 cells) were statistically significant compared with the respective vehicle control (MFcorr.: 1.44 per E+6 cells). Nevertheless, the values obtained for the corrected mutation frequency of this experimental part were close to the range of the 95% control limit and well within our historical negative control data range (MFcorr.: 0.00 – 9.16 per E+6 cells). Therefore, this finding has to be regarded as biologically irrelevant.
The positive control substances EMS (without S9 mix; 400 μg/mL) and DMBA (with S9 mix; 1.25 μg/mL) induced a clear increase in mutation frequencies, as expected. The values of the corrected mutant frequencies (without S9 mix: MFcorr.: 42.47 – 264.00 per E+6 cells; with S9 mix: MFcorr.: 96.88 – 189.14 per E+6 cells) were within our historical positive control data range (without S9 mix: MFcorr.: 62.02 – 268.09 per E+6 cells; with S9 mix: MFcorr.: 41.99 – 736.50 per E+6 cells). - Conclusions:
- Negative with and without metabolic activation.
- Endpoint:
- in vitro gene mutation study in bacteria
- Type of information:
- other: expert assessment
- Adequacy of study:
- weight of evidence
- Study period:
- 2021
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- study well documented, meets generally accepted scientific principles, acceptable for assessment
- Qualifier:
- no guideline required
- Principles of method if other than guideline:
- Expert statement
- GLP compliance:
- no
- Type of assay:
- other: expert statement
- Species / strain / cell type:
- S. typhimurium TA 1535, TA 1537, TA 98, TA 100 and TA 102
- Details on mammalian cell type (if applicable):
- In addition to traditional baceria strain, nitro-reductase deficinet strains for TA98 an TA100 are used, namely TA98NR and TA100NR
- Additional strain / cell type characteristics:
- nitroreductase deficient
- Metabolic activation:
- with and without
- Metabolic activation system:
- uninduced rat/hamster liver S9 mix
- Test concentrations with justification for top dose:
- 0, 2.5, 8, 25, 80, 250, 800 , 2500 µg/plate +S9
0, 0.125, 0.4, 1.25, 4, 12.5, 40, 125, 400, 1250 µg/plate -S9 - Vehicle / solvent:
- DMSO
- Negative solvent / vehicle controls:
- yes
- Positive controls:
- yes
- Species / strain:
- other: refer to the attached expert statament
- Metabolic activation:
- with and without
- Genotoxicity:
- other: refer to the attached expert statement
- Cytotoxicity / choice of top concentrations:
- other: refer to the attached expert statement
- Vehicle controls validity:
- valid
- Positive controls validity:
- valid
- Conclusions:
- Based on the expert statament, the direct-acting mutagenic activity of nitroreductase is confirmed and plays a significant role in the mutagenic properties of the target substance.
Referenceopen allclose all
Table 2. Historical negative control data, Cytochalasin B Method, Period: December 2013 - December 2014
|
Without S9 mix - all vehicles* |
With S9 mix - all vehicles* |
|
Micronucleated Cells [%] |
Micronucleated Cells [%] |
Exposure / Sampling period |
4 h / 24 h & 24 h / 24 h |
4 h / 24 h & 4 h / 44 h |
Mean |
0.5 |
0.6 |
Minimum |
0.2 |
0.1 |
Maximum |
0.9 |
1.5 |
Standard Deviation |
0.2 |
0.3 |
95% Lower Control Limit |
0.1 |
0.0 |
95% Upper Control Limit |
0.8 |
1.1 |
No. of Experiments |
43 |
42 |
* = culture medium, DMSO 1% (v/v), acetone 1% (v/v), ethanol 1% (v/v)
Table 3. Historical positive control data, Cytochalasin B Method, Period: December 2013 - December 2014
|
Without S9 mix Ethyl methanesulfonate (EMS) 300 - 500 μg/mL |
With S9 mix Cyclophosphamide (CPP) 0.5 - 1.0 μg/mL |
|
Micronucleated Cells [%] |
Micronucleated Cells [%] |
Exposure / Sampling period |
4 h / 24 h & 24 h / 24 h |
4 h / 24 h & 4 h / 44 h |
Mean |
3.0 |
5.4 |
Minimum |
2.3 |
2.6 |
Maximum |
6.4 |
13.8 |
Standard Deviation |
0.8 |
2.3 |
95% Lower Control Limit |
1.4 |
0.7 |
95% Upper Control Limit |
4.7 |
10.1 |
No. of Experiments |
43 |
42 |
Cytotoxic effects, as indicated by clearly reduced cloning efficiencies of about or below 20 % of the respective negative control values were not observed in both experiments in the presence and absence of S9 mix, up to the highest applied concentrations.
Endpoint conclusion
- Endpoint conclusion:
- adverse effect observed (positive)
Genetic toxicity in vivo
Description of key information
Comet Assay - OECD TG 489 - Read-Across in progress
Link to relevant study records
- Endpoint:
- in vivo mammalian somatic cell study: gene mutation
- Type of information:
- other: read-across from supporting substance (structural analogue or surrogate)
- Adequacy of study:
- key study
- Study period:
- Not yet defined
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- study well documented, meets generally accepted scientific principles, acceptable for assessment
- Justification for type of information:
- NON-CONFIDENTIAL NAME OF SUBSTANCE:
- Name of the substance on which testing is proposed to be carried out: analogue substance 01
CONSIDERATIONS THAT THE GENERAL ADAPTATION POSSIBILITIES OF ANNEX XI OF THE REACH REGULATION ARE NOT ADEQUATE TO GENERATE THE NECESSARY INFORMATION
This part refers to the available studies on the target substance Acid Black 63 (EC: 264-966-7):
- Available GLP studies: not available.
- Available non-GLP studies: not available.
- Historical human data: not available.
- (Q)SAR: not available.
- Weight of evidence: not available.
- Grouping and read-across:
✓ In vitro gene mutation study in bacteria (OECD TG 471) – NR-deficient strains – Read-Across on analogue substance 02.
✓ In vitro gene mutation study in bacteria (OECD TG 471) – Read-Across on analogue substance 01.
✓ In vitro gene mutation in mammalian cells (OECD TG 476) – Read-Across on analogue substance 01.
✓ In vitro cytogenicity/micronucleus study (OECD TG 487) – Read-Across on analogue substance 01.
CONSIDERATIONS THAT THE SPECIFIC ADAPTATION POSSIBILITIES OF ANNEXES VI TO X (AND COLUMN 2 THEREOF) OF THE REACH REGULATION ARE NOT ADEQUATE TO GENERATE THE NECESSARY INFORMATION:
Under Annex VIII Section 8.4., column 2 of REACH, further mutagenicity studies must be considered in case of a positive result in an in vitro gene mutation study in bacteria.
Guidance on information requirements R7a, section 7.7.6 (2017), states that regarding Annex VIII, when both the mammalian cell tests are negative but there was a positive result in the bacterial test, it will be necessary to decide whether any further testing is needed on a case-by-case basis. For example, suspicion that a unique positive response observed in the bacterial test was due to a specific bacterial metabolism of the test substance could be explored further by investigation in vitro. Alternatively, an in vivo test may be required.
The submitted dossier contains results for the in vitro gene mutation study in bacteria, following the OECD TG 471 with nitro-reductase deficient strains, conducted on the analogue substance 02. This test raises the concern for in vivo gene mutation, since the influence of the nitro-reductase is demonstrated but needs further evidences.
In particular, annex VIII, Column 2 requires the registrant to consider appropriate mutagenicity in vivo studies already at the Annex VIII tonnage level, which involves studies mentioned in Annex IX (among OECD TG 474 Mammalian Erythrocyte micronucleus test, OECD TG 488 Transgenic Rodent Mutation Assay, OECD TG 489 In vivo mammalian Alkaline Comet Assay and OECD TG 486 Unscheduled DNA Synthesis).
CONSIDERATIONS ON THE IN VIVO STUDIES INSERTED IN THE DOSSIER AND EXPERT ASSESSMENT ON TESTING PROPOSAL
There are no in vivo studies conducted on the target substance or on similar substances, submitted with the present dossier.
Therefore, in order to further and completely assess its gene mutation properties in different tissues of the animal, a Comet Assay, OECD TG 489, on analogue substance 01 was presented as testing proposal and it will be also used in read across for assessing the in vivo potential gene mutation properties of the target substance Acid Black 63 (EC: 264-966-7).
analogue substance 01 is, in fact, considered as representative of the mutagenic behavior of Acid Black 63 (EC: 264-966-7) as specified in the read-across section.
OECD TG 489 allows to measure DNA strand breaks, that may result from direct interactions with DNA, alkali labile sites or as a consequence of incomplete excision repair. Therefore, the alkaline comet assay recognizes primary DNA damage that would lead to gene mutations and/or chromosome aberrations, but will also detect DNA damage that may be effectively repaired or lead to cell death. The comet assay can be applied to almost every tissue of an animal from which single cell or nuclei suspensions can be made, including specific site of contact tissues.
Therefore, a confirmation by the Comet assay (for azo dyes the intestinal tract is the site of major metabolism and dye/metabolites absorption) would be sufficient to assess the genotoxic potential of the substance.
Finally, as reported in literature, from the analysis of 91 chemicals with published data from Comet Assay and Transgenic rodent mutation assay (TGR), the comet assay appears to yield similar results to the TGR assay in liver and gastrointestinal tract (predominantly stomach and colon data) and, hence, can be confidently performed to confirm in vivo gene mutation activity in terms of genotoxicity in general. - Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 489 (In vivo Mammalian Alkaline Comet Assay)
- GLP compliance:
- yes
- Type of assay:
- mammalian comet assay
- Sex:
- not specified
- Genotoxicity:
- other: to be performed
- Remarks on result:
- other: the test is in read-across from a submitted testing proposal still under evaluation.
Reference
Endpoint conclusion
- Endpoint conclusion:
- no study available (further information necessary)
Additional information
For further details refer to the attached document on genotoxicity assessment.
Justification for classification or non-classification
Classification for mutagenicity is warranted for substances which cause concern for humans owing to the possibility that they may induce heritable mutations in the germ cells of humans.
The classification in Category 2 is based on:
— Positive evidence obtained from experiments in mammals and/or in some cases from "In vitro" experiments, obtained from:
— Somatic cell mutagenicity tests "In vivo", in mammals; or
— Other "In vivo" somatic cell genotoxicity tests which are supported by positive results from "In vitro" mutagenicity assays.
Currently, two Ames tests [a traditional OECD TG 471 conducted on the analogue substance 01, and an OECD TG 471 NR deficient strains conducted on the analogue substance 02] give positive results, while a HPRT test [OECD TG 476] and an "In vitro" Micronucleus study [OECD TG 487], both conducted on the analogue substance 01, give negative results. Results are conclusive but not sufficient for classification. A new evaluation of the genotoxic potential will be performed once the results of the "In vivo" COMET Assay on the analogue substance 01 will be available.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)