Registration Dossier

Administrative data

First-aid measures

Measures indicated are for the substance at 70 - 90% concentration in mineral oil, as marketed.

INHALATION
Remove from further exposure. For those providing assistance, avoid exposure to yourself or others. Use adequate respiratory protection. If respiratory irritation, dizziness, nausea, or unconsciousness occurs, seek immediate medical assistance. If breathing has stopped, assist ventilation with a mechanical device or use mouth-to-mouth resuscitation.

SKIN CONTACT
Wash contact areas with soap and water. Remove contaminated clothing. Launder contaminated clothing before reuse. For hot product: Immediately immerse in or flush affected area with large amounts of cold water to dissipate heat. Cover with clean cotton sheeting or gauze and get prompt medical attention.

EYE CONTACT
Flush thoroughly with water for at least 15 minutes. Get immediate medical assistance. If medical assistance is not immediately available, flush an additional 15 minutes.

INGESTION
First aid is normally not required. Seek medical attention if discomfort occurs.

Fire-fighting measures

Measures indicated are for the substance at 70 - 90% concentration in mineral oil, as marketed.

EXTINGUISHING MEDIA
Appropriate Extinguishing Media: Use water fog, foam, dry chemical or carbon dioxide (CO2) to extinguish flames.

FIRE FIGHTING
Fire Fighting Instructions: Evacuate area. Prevent run-off from fire control or dilution from entering streams, sewers or drinking water supply. Fire-fighters should use standard protective equipment and in enclosed spaces, self-contained breathing apparatus (SCBA). Use water spray to cool fire exposed surfaces and to protect personnel.

Unusual Fire Hazards: Hazardous material. Firefighters should consider protective equipment indicated in Section 8.

Hazardous Combustion Products: Hydrogen sulphide, Smoke, Fume, Carbon monoxide, Sulphur oxides

Accidental release measures

Measures indicated are for the substance at 70 - 90% concentration in mineral oil, as marketed.

NOTIFICATION PROCEDURES
In the event of a spill or accidental release, notify relevant authorities in accordance with all applicable regulations.

PROTECTIVE MEASURES
Avoid contact with spilled material. Warn or evacuate occupants in surrounding and downwind areas if required, due to toxicity or flammability of the material. See Section 5 for fire fighting information. See the Hazard Identification Section for Significant Hazards. See Section 4 for First Aid Advice. See Section 8 for Personal Protective Equipment.

SPILL MANAGEMENT
Land Spill: Stop leak if you can do so without risk. Do not touch or walk through spilled material. Small Spills: Absorb with earth, sand or other non-combustible material and transfer to containers for later disposal.

Water Spill: Stop leak if you can do so without risk. Material will sink. Remove material, as much as possible, using mechanical equipment.

Water spill and land spill recommendations are based on the most likely spill scenario for this material; however, geographic conditions, wind, temperature, (and in the case of a water spill) wave and current direction and speed may greatly influence the appropriate action to be taken. For this reason, local experts should be consulted. Note: Local regulations may prescribe or limit action to be taken.

ENVIRONMENTAL PRECAUTIONS
Remove debris in path of spill prior to oiling and remove contaminated debris from shoreline and water surface. Dispose of according to local regulations. Large Spills: Dyke far ahead of liquid spill for later recovery and disposal. Prevent entry into waterways, sewers, basements or confined areas. For Large Spills: Cover spill with plastic sheet or tarpaulin to minimise spreading.

Handling and storage

Measures indicated are for the substance at 70 - 90% concentration in mineral oil, as marketed.

HANDLING
Avoid contact with skin. Avoid contact with eyes. Warning: If this material is overheated, especially in the presence of water, hydrogen sulphide may be released; this can cause rapid respiratory collapse, coma and death without necessarily any warning odour being sensed. This product contains Zinc Dialkyl Dithio Phosphate (ZDDP), a thermally sensitive substance. Do not heat this product except as described below. Do not reheat above the maximum loading temperature. Higher temperatures can result in exothermic decomposition leading to the release of highly toxic hydrogen sulphide and extremely odorous alkyl mercaptans. Alkyl mercaptans can be smelled at extremely low concentrations, and vapours may travel for many miles at detectable concentrations.
These decomposition vapours are also flammable and may suddenly ignite when mixed with air in the presence of ignition sources such as sparks or flames.
With proper facilities, no heating is required for pumping at ambient temperatures.
Lower temperatures may result in some crystallisation of the product. If extreme cold weather conditions necessitate heating, then tempered water or oil, not exceeding the maximum loading temperature are recommended.
Product temperature must never exceed the maximum loading temperature. If heated, product temperature should be constantly monitored, and product should be agitated to avoid localised temperatures in the container above the maximum loading temperature.
Higher temperatures will lead to degradation of product quality and eventually to decomposition. Product should be stored at the recommended storage temperature.
Extreme caution must be used in tank gauging or similar operations as lethal concentrations of hydrogen sulphide could accumulate in the head-space of containers.
Warning: If this material is overheated, especially in the presence of water, hydrogen sulphide may be released; this can cause rapid respiratory collapse, coma and death without necessarily any warning odour being sensed.
If decomposition is suspected, or if the product has been overheated, do not open the container, discontinue heating and secure the unit. Initiate emergency procedures, taking all necessary precautions to avoid exposure to noxious or flammable gases (e.g. hydrogen sulphide), such as evacuation of contaminated areas and use of suitable respiratory protection. Prevent small spills and leakage to avoid slip hazard. Products may load from Infineum manufacturing site above the standard loading/unloading range.

Loading/Unloading Temperature: 10°C (50°F) - 60°C (140°F)

Transport Temperature: N/D
Transport Pressure: [Ambient]

Static Accumulator: This material is not a static accumulator.

STORAGE
Do not store in open or unlabelled containers.
Storage Temperature: 10°C (50°F) - 40°C (104°F)
Storage Pressure: [Ambient]

Suitable Containers/Packing: Tank Trucks; Drums; Tank Cars
Suitable Materials and Coatings (Chemical Compatibility): Carbon Steel; Stainless Steel; Zinc; Epoxies
Unsuitable Materials and Coatings: Butyl Rubber; Butadiene Rubber; Rubber; Styrene Rubber

Transport information

Land transport (ADR/RID)

UN number:
3082
Shippingopen allclose all
Class:
9
Classification code:
M6
Packaging group:
III
Labels:
9, EHS
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
3082
Shippingopen allclose all
Class:
9
Packaging group:
III
Labels:
9 (N2, S), EHS
Remarksopen allclose all

Marine transport (IMDG)

UN number:
3082
Proper shipping name and description:
ENVIRONMENTALLY HAZARDOUS SUBSTANCES, LIQUID, N.O.S. (ZINC ALKYL DITHIOPHOSPHATE)
Class:
9
Packaging group:
III
EmS code:
F-A, S-F
Labels:
9
Marine pollutant
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
3082
Proper shipping name and description:
ENVIRONMENTALLY HAZARDOUS SUBSTANCES, LIQUID, N.O.S. (ZINC ALKYL DITHIOPHOSPHATE)
Class:
9
Packaging group:
III
Labels:
9, EHS
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

EXPOSURE LIMIT VALUES

Exposure limits/standards (Note: Exposure limits are not additive)

Substance Name Form Limit/Standard Note Source Year
Hydrogen sulphide N/A STEL 15 ppm ACGIH 2009
Hydrogen sulphide N/A TWA 10 ppm ACGIH 2009


Exposure limits/standards for materials that can be formed when handling this product: When mists / aerosols can occur, the following are recommended: 5 mg/m³ - ACGIH TLV, 10 mg/m³ - ACGIH STEL.

Note: Information about recommended monitoring procedures can be obtained from the relevant agency(ies)/institute(s):
UK Health and Safety Executive (HSE)

ENGINEERING CONTROLS

The level of protection and types of controls necessary will vary depending upon potential exposure conditions. Control measures to consider:
No special requirements under ordinary conditions of use and with adequate ventilation.

PERSONAL PROTECTION

Personal protective equipment selections vary based on potential exposure conditions such as applications, handling practices, concentration and ventilation. Information on the selection of protective equipment for use with this material, as provided below, is based upon intended, normal usage.

Respiratory Protection: If engineering controls do not maintain airborne contaminant concentrations at a level which is adequate to protect worker health, an approved respirator may be appropriate. Respirator selection, use, and maintenance must be in accordance with regulatory requirements, if applicable. Types of respirators to be considered for this material include:
No special requirements under ordinary conditions of use and with adequate ventilation. Type B filter material.

For high airborne concentrations, use an approved supplied-air respirator, operated in positive pressure mode. Supplied air respirators with an escape bottle may be appropriate when oxygen levels are inadequate, gas/vapour warning properties are poor, or if air purifying filter capacity/rating may be exceeded.

Hand Protection: Any specific glove information provided is based on published literature and glove manufacturer data. Glove suitability and breakthrough time will differ depending on the specific use conditions. Contact the glove manufacturer for specific advice on glove selection and breakthrough times for your use conditions. Inspect and replace worn or damaged gloves. The types of gloves to be considered for this material include:
Thermally protective, chemical resistant gloves are recommended. If contact with forearms is likely, wear gauntlet-style gloves. If prolonged or repeated contact is likely, chemical-resistant gloves are recommended. If contact with forearms is likely, wear gauntlet-style gloves. Nitrile, Polyvinyl Chloride (PVC)

Eye Protection: Chemical goggles and face shield are recommended.

Skin and Body Protection: Any specific clothing information provided is based on published literature or manufacturer data. The types of clothing to be considered for this material include:
If prolonged or repeated contact is likely, chemical, and oil resistant clothing is recommended. If product is hot, thermally protective, chemical resistant apron and long sleeves are recommended.

Specific Hygiene Measures: Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants. Discard contaminated clothing and footwear that cannot be cleaned. Practice good housekeeping.

Stability and reactivity

STABILITY: Material is stable under normal conditions.

CONDITIONS TO AVOID: Excessive heat. Contact of hot product with water.

MATERIALS TO AVOID: Strong oxidisers

HAZARDOUS DECOMPOSITION PRODUCTS: Hydrogen sulphide

HAZARDOUS POLYMERIZATION: Will not occur.

Disposal considerations

Disposal recommendations based on material as supplied. Disposal must be in accordance with current applicable laws and regulations, and material characteristics at time of disposal.

DISPOSAL RECOMMENDATIONS
Product is suitable for burning in an enclosed controlled burner for fuel value or disposal by supervised incineration at very high temperatures to prevent formation of undesirable combustion products.

REGULATORY DISPOSAL INFORMATION

European Waste Code: 13 02 XX

NOTE: These codes are assigned based upon the most common uses for this material and may not reflect contaminants resulting from actual use. Waste producers need to assess the actual process used when generating the waste and its contaminants in order to assign the proper waste disposal code(s).

Empty Container Warning Empty Container Warning (where applicable): Empty containers may contain residue and can be dangerous. Do not attempt to refill or clean containers without proper instructions. Empty drums should be completely drained and safely stored until appropriately reconditioned or disposed. Empty containers should be taken for recycling, recovery, or disposal through suitably qualified or licensed contractor and in accordance with governmental regulations. DO NOT PRESSURISE, CUT, WELD, BRAZE, SOLDER, DRILL, GRIND, OR EXPOSE SUCH CONTAINERS TO HEAT, FLAME, SPARKS, STATIC ELECTRICITY, OR OTHER SOURCES OF IGNITION. THEY MAY EXPLODE AND CAUSE INJURY OR DEATH.