Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 234-759-6 | CAS number: 12031-82-2
Guidance on Safe Use
Administrative data
First-aid measures
Description of first aid measures
GENERAL ADVICE:
Move out of dangerous area.
Do not leave the victim unattended.
Show this safety data sheet to the doctor in attendance.
IF INHALED:
Remove victim to fresh air and keep at rest in a position com-fortable for breathing.
If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained per-sonnel.
If unconscious, place in recovery position and seek medical advice.
Maintain open airway.
Loosen tight clothing such as a collar, tie, belt or waistband.
If symptoms persist, call a physician.
IN CASE OF SKIN CONTACTt:
Wash off with soap and plenty of water.
Take off contaminated clothing and shoes immediately.
If symptoms persist, call a physician.
IN CASE OF EYE CONTACT:
Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids.
Keep eye wide open while rinsing.
Remove contact lenses, if present and easy to do. Continue rinsing.
Protect unharmed eye.
If eye irritation persists, consult a specialist.
IF SWALLOWED:
Rinse mouth with water.
DO NOT induce vomiting unless directed to do so by a physi-cian or poison control center.
If vomiting occurs, the head should be kept low so that vomit does not enter the lungs.
Never give anything by mouth to an unconscious person.
If unconscious, place in recovery position and get medical attention immediately.
Maintain open airway.
Loosen tight clothing such as a collar, tie, belt or waistband.
Fire-fighting measures
Extinguishing media
Suitable extinguishing media: Use water spray, alcohol-resistant foam, dry chemical or car-bon dioxide.
Unsuitable extinguishing media: High volume water jet
Special hazards arising from the substance or mixture
Specific hazards during fire-fighting:Do not allow run-off from fire fighting to enter drains or water courses.
Hazardous combustion prod-ucts:Metal oxides
Advice for firefighters
Special protective equipment for firefighters: Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.
Further information:
The product itself does not burn.
Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire.
No action shall be taken involving any personal risk or without suitable training.
Collect contaminated fire extinguishing water separately. This must not be discharged into drains.
Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.
Accidental release measures
Personal precautions, protective equipment and emergency procedures
Personal precautions:
No action shall be taken involving any personal risk or without suitable training.
Keep unnecessary and unprotected personnel from entering.
Do not touch or walk through spilt material.
Avoid dust formation.
Avoid breathing dust.
Ensure adequate ventilation.
In case of inadequate ventilation wear respiratory protection.
Use personal protective equipment.
Environmental precautions
Environmental precautions:
Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains and sewers.
If the product contaminates rivers and lakes or drains inform respective authorities.
Methods and material for containment and cleaning up
Methods for cleaning up:
Move containers from spill area.
Stop leak if safe to do so.
Pick up and arrange disposal without creating dust.
Sweep up and shovel.
Keep in suitable, closed containers for disposal.
Dispose of wastes in an approved waste disposal facility.
Handling and storage
Precautions for safe handling
Advice on safe handling:
For personal protection see section 8.
Avoid contact with skin and eyes.
Do not breathe vapours/dust.
Provide sufficient air exchange and/or exhaust in work rooms.
In case of insufficient ventilation, wear suitable respiratory equipment.
Keep in the original container or an approved alternative made from a compatible material, kept tightly closed when not in use.
Dispose of rinse water in accordance with local and national regulations.
Advice on protection against fire and explosion:
Avoid dust formation.
Provide appropriate exhaust ventilation at places where dust is formed.
Hygiene measures:
When using do not eat, drink or smoke. Wash hands and face before breaks and immediately after handling the product. Remove contaminated clothing and protective equipment be-fore entering eating areas.
Conditions for safe storage, including any incompatibilities
Requirements for storage areas and containers:
Store in accordance with local regulations. Store in a segre-gated and approved area. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink. Keep containers sealed until ready for use. Con-tainers that have been opened must be carefully resealed and kept upright to prevent leakage. Electrical installations / work-ing materials must comply with the technological safety stand-ards.
Advice on common storage:
Keep away from:
Strong oxidizing agents
Further information on stor-age stability:
No decomposition if stored and applied as directed.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Engineering measures
If user operations generate dust, fumes or mist, use ventilation to keep exposure to airborne con-taminants below the exposure limit.
Personal protective equipment
Eye protection: Tightly fitting safety goggles
Hand protection Material: Use chemical-resistant, impervious gloves.
Wearing time: < 60 min
Remarks: The suitability for a specific workplace should be discussed with the producers of the protective gloves. After contamina-tion with product change the gloves immediately and dispose of them according to relevant national and local regulations
Skin and body protection:
Impervious clothing
Choose body protection according to the amount and con-centration of the dangerous substance at the work place.
Respiratory protection: In the case of dust or aerosol formation use respirator with an approved filter.
Filter type: P1 filter
Stability and reactivity
Reactivity
No specific test data related to reactivity available for this product or its ingredients.
Chemical stability
Stable under normal conditions.
Possibility of hazardous reactions
Hazardous reactions: Under normal conditions of storage and use, hazardous reac-tions will not occur.
Disposal considerations
Disposal considerations
Waste treatment methods
Product: The generation of waste should be avoided or minimised wherever possible.
Where possible recycling is preferred to disposal or incinera-tion.
Wastedisposal should be in accordance with existing federal state, provincial and or local environmental controls
Dispose of as hazardous waste in compliance with local and national regulations.
Do not contaminate ponds, waterways or ditches with chemi-cal or used container.
The product should not be allowed to enter drains, water courses or the soil.
Dispose of wastes in an approved waste disposal facility.
Contaminated packaging:
Empty remaining contents.
Dispose of as unused product.
Do not re-use empty containers.
Methods and material for containment and cleaning up
Methods for cleaning up:
Move containers from spill area.
Stop leak if safe to do so.
Pick up and arrange disposal without creating dust.
Sweep up and shovel.
Keep in suitable, closed containers for disposal.
Dispose of wastes in an approved waste disposal facility.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
