Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 500-301-1 | CAS number: 111870-68-9 1 - 6.5 moles propoxylated
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Endpoint summary
Administrative data
Description of key information
The analogue substance was tested in the EPISKIN™ Reconstructed Human Epidermis Model using triplicate tissues during 15 minutes. The relative mean viability of the test substance treated tissues was 100.7 %. Therefore it can be concluded that the substance is not irritant to the skin.
The analogue was also tested in the EpiDerm™ Human Skin Model using duplicate tissues during 3 and 60 minutes. The relative mean viability of the test substance treated tissues was 98.0 % for the 3 minutes exposure and 101.5% for the 60 minutes exposure. Therefore it can be concluded that the substance is not corrosive to the skin.
The eye irritation potential of the substance itself was assessed by means of the Human Cornea Model Test. The substance interfered with MTT reduction, but not with color. Irritating effects were not observed following incubation with the substance. Compared with the value of the negative control the relative mean absorption value corresponding to the viability of the tissues did not decrease below 60% (93.7%). In conclusion, it can be stated that in this study and under the experimental conditions reported, the substance does not possess any eye irritating potential.
In a BCOP assay bovine corneas were exposed to the substance itself and assessed for opacity and permeability. No effects on opacity readings was observed and permeability was similar to the negative controls. The calculation of the In Vitro Irritancy Score showed that the substance is not severely damaging to the eyes.
Key value for chemical safety assessment
Skin irritation / corrosion
Link to relevant study records
- Endpoint:
- skin corrosion: in vitro / ex vivo
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 16 August 2017 to 18 August 2017
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 431 (In Vitro Skin Corrosion: Reconstructed Human Epidermis (RHE) Test Method)
- Version / remarks:
- 2016
- Qualifier:
- according to guideline
- Guideline:
- other: Method B.40bis of Commission Regulation (EC) No 440/2008, of 30 May 2008,
- Version / remarks:
- laying down test methods pursuant to Regulation (EC) No 1907/2006 of the European Parliament and of the Council on the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH)
- GLP compliance:
- yes (incl. QA statement)
- Test system:
- human skin model
- Source species:
- human
- Cell type:
- other: EpiDerm™ Human Skin Mode
- Cell source:
- other: EpiDerm™ Human Skin Mode
- Vehicle:
- unchanged (no vehicle)
- Details on test system:
- RECONSTRUCTED HUMAN EPIDERMIS (RHE) TISSUE
- Model used: EpiDerm™ Human Skin Mode (MatTek)
- Tissue batch number(s): 25837
- Delivery date: 15 August 2017
TEMPERATURE USED FOR TEST SYSTEM
- Temperature used during treatment / exposure: 37 ˚C, 5% CO2
- Temperature of post-treatment incubation (if applicable): 37 ˚C, 5% CO2
REMOVAL OF TEST MATERIAL AND CONTROLS: rinsed under a constant soft stream of DPBS and blotted dry with a tissue
MTT DYE USED TO MEASURE TISSUE VIABILITY AFTER TREATMENT / EXPOSURE
- MTT concentration: 1.0 mg/mL MTT
- Incubation time: 3 h
- Spectrophotometer: Labtech LT-4500 microplate reader
- Wavelength: 570 nM
NUMBER OF REPLICATE TISSUES: 2/treatment
TISSUES:
- Fresh tissues: for treatment, negative control and positive control
NUMBER OF INDEPENDENT TEST SEQUENCES / EXPERIMENTS TO DERIVE FINAL PREDICTION: 1 experiment
PREDICTION MODEL / DECISION CRITERIA (choose relevant statement)
- The test substance is considered to be corrosive to skin if [complete, e.g. the viability after 3 minutes exposure is less than 50% (H314 1A), or if the viability after 3 minutes exposure is greater than or equal to 50 % and the viability after 1 hour exposure is less than 15% (H314 1B or 1C)
- The test substance is considered to be non-corrosive to skin if [complete, e.g. the viability after 3 minutes exposure is greater than or equal to 50% and the viability after 1 hour exposure is greater than or equal to 15% (not classified as corrosive) - Control samples:
- yes, concurrent negative control
- yes, concurrent positive control
- Amount/concentration applied:
- TEST MATERIAL
- Amount(s) applied (volume or weight with unit): 0.05 mL as such
NEGATIVE CONTROL
- Amount(s) applied (volume or weight with unit): 50 µL distilled water
POSITIVE CONTROL
- Amount(s) applied (volume or weight): 50 µL 8.0 N Potassium Hydroxide - Duration of treatment / exposure:
- 3 min and 60 min
- Duration of post-treatment incubation (if applicable):
- The plates was incubated (37 ˚C, 5% CO2) for 3 hours in presence of MTT. Thereafter tissues were placed in isopropanol for MTT extraction, which was measured in triplicate samples as optical density at 570 nm.
- Number of replicates:
- 2/treatment
- Irritation / corrosion parameter:
- % tissue viability
- Run / experiment:
- A 3 minutes exposure
- Value:
- 98
- Negative controls validity:
- valid
- Positive controls validity:
- valid
- Remarks on result:
- other: non-corrosive
- Irritation / corrosion parameter:
- % tissue viability
- Run / experiment:
- B 60 minutes exposure
- Value:
- 101.5
- Negative controls validity:
- valid
- Positive controls validity:
- valid
- Remarks on result:
- other: non-corrosive
- Other effects / acceptance of results:
- The results were in agreement with the quality criteria:
Negative Control
The absolute OD570 of the negative control treated tissues in the MTT-test is an indicator of tissue viability obtained in the testing laboratory after the shipping and storing procedure and under specific conditions of the assay. The mean OD 570 of the two negative control tissues should be ≥ 0.8 and ≤ 2.8 for each exposure time, which ensures that the tissue viability meets the acceptance criteria.
Positive Control
Potassium Hydroxide 8.0N solution is used as a positive control. An assay meets the acceptance criterion if mean relative tissue viability of the 60 minute positive control is < 15%.
Coefficient of Variation
In the range 20 and 100% viability, the Coefficient of Variation between tissue replicates should be ≤ 30%. - Interpretation of results:
- GHS criteria not met
- Conclusions:
- The substance is considered non-corrosive
- Executive summary:
The substance was tested in the EpiDerm™ Human Skin Model using duplicate tissues during 3 and 60 minutes. The relative mean viability of the test substance treated tissues was 98.0 % for the 3 minutes exposure and 101.5% for the 60 minutes exposure. Therefore it can be concluded that the substance is not corrosive to the skin.
- Endpoint:
- skin irritation: in vitro / ex vivo
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 11 October 2017 to 16 October 2017
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 439 (In Vitro Skin Irritation: Reconstructed Human Epidermis Test Method)
- Qualifier:
- according to guideline
- Guideline:
- EU Method B.46 (In Vitro Skin Irritation: Reconstructed Human Epidermis Model Test)
- Version / remarks:
- amending, for the purpose of its adaption to technical progress, Regulation (EC) No 440/2008 as described in Commission Regulation (EC) No. 761/2009, of 23 July 2009, laying down test methods pursuant to Regulation (EC) No. 1907/2006 of the European Parliament and of the Council on the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH).
- GLP compliance:
- yes (incl. QA statement)
- Test system:
- human skin model
- Source species:
- human
- Cell type:
- other: EPISKIN™ Reconstructed Human Epidermis Model Kit
- Cell source:
- other: EPISKIN™ Reconstructed Human Epidermis Model Kit
- Vehicle:
- unchanged (no vehicle)
- Details on test system:
- RECONSTRUCTED HUMAN EPIDERMIS (RHE) TISSUE
- Model used: EPISKIN™ Reconstructed Human Epidermis Model Kit
- Tissue batch number(s):17-EKIN-041 (0.38cm2)
- Delivery date: 10 October 2017
TEMPERATURE USED FOR TEST SYSTEM
- Temperature used during treatment / exposure: 37 ˚C, 5% CO2
- Temperature of post-treatment incubation (if applicable): 37 ˚C, 5% CO2
REMOVAL OF TEST MATERIAL AND CONTROLS:rinsed using a wash bottle containing DPBS
MTT DYE USED TO MEASURE TISSUE VIABILITY AFTER TREATMENT / EXPOSURE
- MTT concentration: 0.3 mg/mL MTT
- Incubation time: 3 h
- Spectrophotometer: Anthos 2001 microplate reader
- Wavelength: 562 nM
NUMBER OF REPLICATE TISSUES: 3/treatment
TISSUES:
- Fresh tissues: for treatment, negative control and positive control
NUMBER OF INDEPENDENT TEST SEQUENCES / EXPERIMENTS TO DERIVE FINAL PREDICTION: 1 experiment
PREDICTION MODEL / DECISION CRITERIA (choose relevant statement)
- Relative mean tissue viability is ≤50% --> irritant (H315)
- Relative mean tissue viability is >50% --> non-irritant (not classified) - Control samples:
- yes, concurrent negative control
- yes, concurrent positive control
- Amount/concentration applied:
- TEST MATERIAL
- Amount(s) applied (volume or weight with unit): 10 mg as such ( (26.3 mg/cm2)
NEGATIVE CONTROL:
- Amount(s) applied (volume or weight with unit): 50 µL DPBS
POSITIVE CONTROL
- Amount(s) applied (volume or weight): 10 µL SDS (5%) - Duration of treatment / exposure:
- 15 min at room temperature (thereafter rinsed with DPBS)
- Duration of post-treatment incubation (if applicable):
- The plates were incubated (37 ˚C, 5% CO2) for 42 hours thereafter shaken to homogenize. Thereafter incubated for 3 hours in presence of MTT. The epidermis and the collagen matrix were separated and immersed in acidified isopropanol. The tissues were stored in a refrigirator for 6 days at 1-10 ˚C for MTT extraction, which was measured in triplicate samples as optical density at 570 nm.
- Number of replicates:
- 3/treatment
- Irritation / corrosion parameter:
- % tissue viability
- Run / experiment:
- 15 minutes exposure
- Value:
- 100.7
- Negative controls validity:
- valid
- Positive controls validity:
- valid
- Remarks on result:
- no indication of irritation
- Other effects / acceptance of results:
- The results were in agreement with the quality criteria:
Positive Control:
The assay establishes the acceptance criterion for an acceptable test if the relative mean tissue viability for the positive control treated tissues is ≤40% relative to the negative control treated tissues, and the standard deviation (SD) value of the percentage viability is ≤18%.
Negative Control:
The assay establishes the acceptance criterion for an acceptable test if the mean OD562 for the negative control treated tissues is ≥0.6 and ≤1.5, and the SD value of the percentage viability is ≤18%.
Test Item:
The assay establishes the acceptance criterion for an acceptable test if the standard deviation calculated from individual percentage tissue viabilities of the three identically treated tissues is ≤18%. - Interpretation of results:
- GHS criteria not met
- Conclusions:
- The substance is considered non-irrirant
- Executive summary:
The substance was tested in the EPISKIN™ Reconstructed Human Epidermis Model using triplicate tissues during 15 minutes. The relative mean viability of the test substance treated tissues was 100.7 %. Therefore it can be concluded that the substance is not irritant to the skin.
Referenceopen allclose all
|
Exposure time |
Mean OD570 |
Relative mean viability |
Negative control |
3 min |
1.586 |
100% |
|
60 min |
1.683 |
100% |
Test substance |
3 min |
1.554 |
98.0% |
|
60 min |
1.708 |
101.5% |
Positive control |
3 min |
0.064 |
4.0% |
|
60 min |
0.058 |
3.4% |
|
Exposure time |
Mean OD570 |
Relative mean viability |
SD |
Negative control |
15 min |
0.873 |
100% |
7.9% |
Test substance |
15 min |
0.879 |
100.7% |
5 % |
Positive control |
15 min |
0.204 |
23.4% |
5 % |
Endpoint conclusion
- Endpoint conclusion:
- no adverse effect observed (not irritating)
Eye irritation
Link to relevant study records
- Endpoint:
- eye irritation: in vitro / ex vivo
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 21 July 2017 to 31 August 2017
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 492 (Reconstructed Human Cornea-like Epithelium (RhCE) Test Method for Identifying Chemicals Not Requiring Classification and Labelling for Eye Irritation or Serious Eye Damage)
- Version / remarks:
- MatTek Corporation Protocol: EpiOcular™ Eye Irritation Test (OCL-200-EIT) for the prediction of acute ocular irritation of chemicals; for use with MatTek Corporation’s Reconstructed Human EpiOcular™ Model; 29 June 2015.
- GLP compliance:
- yes (incl. QA statement)
- Species:
- other: human keratinocytes
- Details on test animals or tissues and environmental conditions:
- EpiOcular™ kits and MTT-100 kits are purchased from MatTek Corporation (82105 Bratislava, Slovakia).
Lot No.: 27002
Sealed 24-well plate Contains 12/24 inserts with EpiOcular™ tissues on agarose
Serum-free test medium DMEM-Medium
Positive control Methyl Acetate (CAS#79-20-9)
12-well plate Holding plate
24-well plates For MTT viability assay
6-well plates For storing inserts, or for topically applying test agents
Ca++Mg++-Free D-PBS Dulbecco´s Phosphate Buffered Saline
MTT-100 Assay Kit Components
1 vial, 2 mL MTT concentrate
1 vial, 8 mL MTT diluent (supplemented DMEM) For diluting MTT concentrate prior to use in the MTT assay
1 bottle, 60 mL Extractant solution (Isopropanol) For extraction of formazan crystals - Vehicle:
- unchanged (no vehicle)
- Controls:
- yes, concurrent no treatment
- yes, concurrent positive control
- yes, concurrent negative control
- Amount / concentration applied:
- 50 uL
- Duration of treatment / exposure:
- 30 minutes
- Duration of post- treatment incubation (in vitro):
- 12 minutes in Assay Medium (to remove any test item absorbed into the tissue) and 120 minutes in Assay Mediumat 37 ± 1.5 °C in a humidified atmosphere of 5 ± 0.5% CO2 (post-treatment incubation).
- Number of animals or in vitro replicates:
- 2 replicates per treatment (except for blank)
- Details on study design:
- At the end of the 30 minutes treatment time, the test item was removed by extensively rinsing the tissues (3 times) with Ca++Mg++-free DPBS (brought to room temperature).
After rinsing, the tissues were immediately transferred to and immersed in 5 mL of previously warmed Assay Medium (room temperature) in a pre-labelled 12-well plate for 12 minute immersion incubation (post-soak) at room temperature. This incubation in Assay Medium was intended to remove any test item absorbed into the tissue.
At the end of the post-soak immersion, each insert was removed from the Assay Medium, the medium was decanted off the tissue, and the inserts were blotted on absorbent material, and transferred to the appropriate well of the pre-labelled glass tube containing 1 mL of warm Assay Medium. The tissues are incubated for 120 minutes at 37 ± 1.5 °C in a humidified atmosphere of 5 ± 0.5% CO2 (post-treatment incubation).
At the end of the post-treatment incubation, each insert was removed and gently blotted on absorbent material. The tissues were placed into the 24-well plate containing 0.3 mL of MTT solution. Once all the tissues are placed into the 24-well plate, the plate was incubated for 180 minutes at standard culture conditions.
Each insert was removed from the 24-well plate after 180 minutes, the bottom of the insert was blotted on absorbent material, and then transferred to a pre-labelled 24-well plate containing 2.0 mL of isopropanol in each designated well so that no isopropanol was flowing into the insert on the tissue surface. The plates were sealed with a standard plate sealer, and were stored overnight at 2-8 °C in the dark and then shaken for 2-3 hours at room temperature. At the end of the extraction period, the tissue was pierced and the liquid within each insert was decanted into the well from which it was taken.
The extract solution was mixed and two 200 µL aliquots were transferred to the appropriate wells of a pre-labelled 96-well plate.
The absorbance at 570 nm (OD570) of each well was measured with a plate reader (Versamax® Molecular Devices, 85737 Ismaning, Germany, Software Softmax Pro Enterprise, version 4.7.1). No reference wavelength measurement was used. - Irritation parameter:
- other: viability %
- Value:
- 92.1
- Negative controls validity:
- valid
- Positive controls validity:
- valid
- Interpretation of results:
- GHS criteria not met
- Conclusions:
- The substance is not irritating to the eyes
- Executive summary:
The eye irritation potential of the substance was assessed by means of the Human Cornea Model Test. The substance did not prove to be an MTT reducer and color interference was excluded.
Each 50 µL of the test item, the negative control (deionised water) or the positive control (methyl acetate) were applied to each of duplicate tissue for 30 minutes.
After treatment with the negative control the absorbance values were well within the required acceptability criterion of OD > 0.8 and < 2.5 thus showing the quality of the tissues.
Treatment with the positive control induced a decrease below 50% compared with the negative control value in the relative absorbance thus ensuring the validity of the test system.
The difference of viability between the two relating tissues was < 20% in the same run (for test item tissues, positive and negative control tissues).
Irritating effects were not observed following incubation with the substance. Compared with the value of the negative control the relative mean absorption value corresponding to the viability of the tissues did not decrease below 60% (92.1%).
In conclusion, it can be stated that in this study and under the experimental conditions reported, the substance does not possess any eye irritating potential.
- Endpoint:
- eye irritation: in vitro / ex vivo
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 05 October 2017
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 437 (Bovine Corneal Opacity and Permeability Test Method for Identifying i) Chemicals Inducing Serious Eye Damage and ii) Chemicals Not Requiring Classification for Eye Irritation or Serious Eye Damage)
- Qualifier:
- according to guideline
- Guideline:
- EU method B.47 (Bovine corneal opacity and permeability test method for identifying ocular corrosives and severe irritants)
- GLP compliance:
- yes (incl. QA statement)
- Species:
- cattle
- Details on test animals or tissues and environmental conditions:
- SOURCE OF COLLECTED EYES
- Source: local abattoir
- Number of animals: not indicated
-- Storage, temperature and transport conditions of ocular tissue: placed in Hanks’ Balanced Salt Solution (HBSS) supplemented with antibiotics (penicillin at 100 IU/mL and streptomycin at 100 µg/mL), transported over ice packs on the same day of slaughter. The corneas were prepared immediately on arrival.
- Time interval prior to initiating testing: not indicated
- indication of any existing defects or lesions in ocular tissue samples: checked and only undamaged tissue used - Vehicle:
- physiological saline
- Controls:
- yes, concurrent vehicle
- yes, concurrent positive control
- Amount / concentration applied:
- TEST MATERIAL: 0.75 mL as such
- Duration of treatment / exposure:
- 10 minutes at 32 ± 1 ºC
- Duration of post- treatment incubation (in vitro):
- post treatment opacity measurement immediately
permeality measurement after exposure to fluorescein for 120 min at 32 ± 1 ºC - Details on study design:
- QUALITY CHECK OF THE ISOLATED CORNEAS:based on visual examination and pre-treatment opacity check
NUMBER OF REPLICATES: 3/treatment
TREATMENT METHOD:closed chamber
REMOVAL OF TEST SUBSTANCE: 3 rinses with EMEM containing phenol red
METHODS FOR MEASURED ENDPOINTS:
- Corneal opacity and Corneal permeability
SCORING SYSTEM: In Vitro Irritancy Score (IVIS)
DECISION CRITERIA:
IVIS Classification
≤ 3 No category. Not requiring classification to UN GHS or EU CLP
> 3; ≤55 No prediction of eye irritation can be made
> 55 Category 1. UN GHS or EU CLP Causes serious eye damage - Irritation parameter:
- in vitro irritation score
- Value:
- 1.3
- Negative controls validity:
- valid
- Positive controls validity:
- not valid
- Remarks:
- see below
- Remarks on result:
- no indication of irritation
- Other effects / acceptance of results:
- The positive control group had an overall IVIS of 68.4 which was higher than the criteria range set for an acceptable test. However, it was decided that the results were considered acceptable as the positive control group still provided its’ intended function. The result of the test item gave a score that was consistent with a non-irritant, so therefore the corneas were considered not to have been compromised.
This deviation was considered to have not affected the integrity or validity of the study. - Interpretation of results:
- GHS criteria not met
- Conclusions:
- Based on the results of the test the substance is considered not severely damaging to the eyes
- Executive summary:
In a BCOP assay bovine corneas were exposed to the substance and assessed for opacity and permeability. No effects of the substance on opacity readings and permeability was observed. The calculation of the In Vitro Irritancy Score (1.3) showed that the substance is not severely damaging to the eyes.
Referenceopen allclose all
Dose Group |
Ab-sorbance |
Ab-sorbance |
Mean Absor-bance (Tissue 1/2) |
Mean Absorbance* Tissue 1 and 2 |
Mean Absorbance of |
Rel. Absorbance [%] |
Absolute Value of the Difference of the Rel. Absorbances [%] |
Mean Rel. Absorbance [%]*** |
Blank |
0.038 |
0.038 |
0.038 |
0.000 |
|
99.1 |
|
|
Negative Control |
1.674 |
1.753 |
1.714 |
1.676 |
1.691 |
100.9 |
1.8 |
100.0 |
1.735 |
1.753 |
1.744 |
1.706 |
36.8 |
||||
Positive Control |
0.626 |
0.693 |
0.660 |
0.622 |
0.617 |
36.2 |
0.6 |
36.5 |
0.647 |
0.652 |
0.649 |
0.611 |
92.6 |
||||
Test Item |
1.555 |
1.651 |
1.603 |
1.565 |
1.558 |
91.7 |
0.9 |
92.1 |
1.581 |
1.595 |
1.588 |
1.550 |
99.1 |
* Mean
of two replicate wells after blank correction
** Relative
absorbance [rounded values]: 100 * (absorbace test item/positive
control/negative control)/absorbance negative control
*** Mean relative absorbance [rounded values]: 100 * (mean absorbace test item/positive control/negative control)/mean absorbance negative control
Treatment |
Cornea Number |
Opacity |
Permeability (OD) |
In Vitro Irritancy Score |
||
Post-Incubation - Pre‑Treatment |
Corrected Value |
|
Corrected Value |
|||
Negative Control |
10 |
3 |
|
0.054 |
|
|
11 |
3 |
|
0.020 |
|
|
|
12 |
2 |
|
0.092 |
|
|
|
|
2.7 |
|
0.055 |
|
3.5 |
|
Positive Control |
13 |
33 |
30.3 |
2.630 |
2.575 |
|
14 |
34 |
31.3 |
3.025 |
2.970 |
|
|
15 |
28 |
25.3 |
2.385 |
2.330 |
|
|
|
|
29.0 |
|
2.625 |
68.4 |
|
Test Item |
16 |
5 |
2.3 |
0.035 |
0.000 |
|
17 |
4 |
1.3 |
0.021 |
0.000 |
|
|
18 |
3 |
0.3 |
0.018 |
0.000 |
|
|
|
|
1.3 |
|
0.000 |
1.3 |
OD= Optical density
Endpoint conclusion
- Endpoint conclusion:
- no adverse effect observed (not irritating)
Respiratory irritation
Endpoint conclusion
- Endpoint conclusion:
- no study available
Additional information
No skin irritation studies on Castor oil, hydrogenated, propoxylated are available. In view of the structural and physico-chemical similarities between the source and the target chemical, the outcome of the skin irritation/corrosion studies with Castor oil, hydrogenated, ethoxylated is considered to be representative for the irritant properties of the target substance.
The eye irritation studies on Castor oil, hydrogenated, propoxylated indicate that the substance is not irritating to the eyes. The appropriateness of the read-across as proposed is confirmed by the outcome of the eye irritation/corrosion studies with Castor oil, hydrogenated, ethoxylated, the source substance, that is also not irritating to the eyes.
Justification for classification or non-classification
Based on the available information no classification for skin- and eye irritation is necessary according to Regulation (EC) No 1272/2008 (CLP).
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.