Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 605-620-0 | CAS number: 171869-89-9
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Endpoint summary
Administrative data
Description of key information
Skin sensitization (OECD 429), mouse: sensitising
Skin sensitiztion (OECD 406, Buehler), guinea pigs: sensitising
Key value for chemical safety assessment
Skin sensitisation
Link to relevant study records
- Endpoint:
- skin sensitisation: in vivo (LLNA)
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 08 - 21 Jun 2005
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 429 (Skin Sensitisation: Local Lymph Node Assay)
- Version / remarks:
- 2002
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EPA OPPTS 870.2600 (Skin Sensitisation)
- Version / remarks:
- 2003
- Deviations:
- no
- GLP compliance:
- yes
- Type of study:
- mouse local lymph node assay (LLNA)
- Specific details on test material used for the study:
- STABILITY AND STORAGE CONDITIONS OF TEST MATERIAL
- Storage condition of test material: stored in a closed container protected from heat, sparks and flame, protected from moisture or water, stored at room temperature
- Stability under test conditions: stable
- Solubility and stability of the test substance in the solvent/vehicle: The test material was soluble in the vehicle, N,N-Dimethylformamide (DMF). - Species:
- mouse
- Strain:
- CBA:J
- Sex:
- female
- Details on test animals and environmental conditions:
- TEST ANIMALS
- Source: Harlan Sprague Dawley Inc., MD, USA
- Females nulliparous and non-pregnant: yes
- Age at study initiation: 10 weeks
- Weight at study initiation: 19.4 - 23.2 g
- Housing: animals were individually housed in suspended wire-mesh cages elevated over Bed-O´Cobs Combination bedding; animals were group housed for 5 h in a shoe-box tape cage (5 animals per cage) containing Bed-O´Cobs Combination bedding following tail vein injection of thymidine (3H-TdR); plastic tunnels were placed in each cage as an environmental enrichment device
- Diet: certified Rodent Diet #5002 (PMI International Inc.), ad libitum
- Water: municipal water, ad libitum
- Acclimation period: five days
- Indication of any skin lesions: baseline dermal score were recorded on study Day 1
ENVIRONMENTAL CONDITIONS
- Temperature (°C): 20.9 - 22.5
- Humidity (%): 52 - 58
- Air changes (per hr): 10 - 12
- Photoperiod (hrs dark / hrs light): 12/12 - Vehicle:
- dimethylformamide
- Concentration:
- Range finding test:
- 10, 20, 40, 80 and 100% (v/v) in DMF
Main experiment:
- 20, 40 and 80% (v/v) in DMF - No. of animals per dose:
- 1 (range finding test)
5 (main test) - Details on study design:
- PRE-SCREEN TESTS:
- Compound solubility: The test material was completely soluble in the vehicle (DMF). Test material concentrations of 10, 20, 40, 80 and 100% were used.
- Irritation: dermal scores were recorded on study Day 2 and 3.
- Ear thickness measurements: Ear thickness was measured on study Day 3.
MAIN STUDY
ANIMAL ASSIGNMENT AND TREATMENT
- Name of test method: [3H]-methyl thymidine (3H-TdR) incorporation
- Criteria used to consider a positive response: The test item will be regarded as a sensitiser if at least one concentration of the test item results in a threefold or greater increase in 3HTdR incorporation compared to control values. Any test item failing to produce a threefold or greater increase in 3H-TdR incorporation will be classified as a “non-sensitiser”.
TREATMENT PREPARATION AND ADMINISTRATION:
25 μl of the test item was applied to the dorsal surface of each ear of each mouse for three consecutive days; specifically, each day the dose was administered by applying a 12.5 µl aliquot to the left ear followed by an equal amount to the right ear. A further group of five mice received the vehicle or positive control alone in the same manner. Local irritation reactions were assessed. On day 6 an injection of 250 μl phosphate buffered saline (PBS) containing 20 μCi of [3H]-methyl
thymidine (3H-TdR) was made into the tail vein of each experimental mouse. Five hours later, the draining auricular lymph node of each ear was excised for each animal and pooled in a Stomacher sample bag containing 7 ml PBS. The lymph nodes were disaggregated by gentle mechanical disaggregation using a Stomacher 80 Lab System. The suspensions were centrifuged at 1000 rpm for 10 min at -4 °C. The pellets was re-suspended in 10 ml PBS and centrifuged again. Radioactive material was precipitated with 3 ml of 5% trichloroacetic acid at 4 °C for 18 hours. [3H]-TdR incorporation was measured by β-scintillation counting as disintegrations per minute (dpm). - Positive control substance(s):
- hexyl cinnamic aldehyde (CAS No 101-86-0)
- Statistics:
- Data comparison was made using One Way Analysis of Variance (ANOVA) if the residues were normally distributed and the data had an equality of variance across the groups. Equality of variance was determined using Levene´s test. If the data did not satisfy the normality and equality of variance requirements, a Kruskal-Wallis test was performed. When an ANOVA or Kruskal-Wallis test was significant, pair-wise comparisons of the exposed groups or the positive control to the negative control were made using a Dunnett´s test or a Wilcoxon test, respectively. Using the disintegration per minute (dpm) data and the stimulation indexes, a quadratic regression on the dose levels was conducted using the data from the negative control and the 20, 40 or 80% test material groups. The resulting equation from the regression analysis for the stimulation index was used to determine the EC3 value.
- Positive control results:
- A group of five animals was treated with 25 μl of the positive control substance alpha-hexylcinnamaldehyde (HCA) as a 25% solution in DMF. A further control group of five animals was treated with DMF alone. The stimulation index expressed as the mean radioactive incorporation for the treatment group divided by the mean radioactive incorporation of the vehicle control group is 11.6. Therefore, alpha-hexylcinnamaldehyde (HCA) was considered to be a sensitiser under the conditions of the test.
- Key result
- Parameter:
- SI
- Value:
- 5.6
- Test group / Remarks:
- 20% test material in DMF
- Key result
- Parameter:
- SI
- Value:
- 10.9
- Test group / Remarks:
- 40% test material in DMF
- Key result
- Parameter:
- SI
- Value:
- 9.4
- Test group / Remarks:
- 80% test material in DMF
- Key result
- Parameter:
- EC3
- Value:
- 7
- Test group / Remarks:
- test material
- Cellular proliferation data / Observations:
- DETAILS ON STIMULATION INDEX CALCULATION
The stimulation index for each test group was calculated as followed: Stimulation index (SI) = mean dpm of test group / mean dpm of negative control group
CLINICAL OBSERVATIONS
Vehicle control animals as well as animals treated with 20 and 40% of the test material showed no notable observations. Animals treated with 80% test material showed no notable clinical observations on Day 1 and 2. Clinical observations were recorded on Days 3-6 and consisted of hair loss and flaking/scaling on the ears.
BODY WEIGHTS
The mean body weight for all groups indicated a mean body weight gain ranging from 1.62 to 4.83%.
DERMAL SCORE
Dermal scores on Day 6 were 0 for all groups except the group of mice treated with 80% test material where the dermal score was 2 (moderate irritation) for all animals in this group. - Interpretation of results:
- other: CLP/EU GHS criteria are met, Category 1B classification is required according to Regulations (EC) No 1272/2008.
- Conclusions:
- The stimulation indices (SI) obtained in the LLNA conducted with the test material at concentrations of 20, 40 and 80% in DMF (v/v) were greater than 3 in each case (5.6, 10.9 and 9.4%, respectively) with statistical evidence of a dose-response and, hence the test material is considered positive for contact sensitisation. The EC3 value was calculated as 7%.
Reference
Table 1: Summary of LLNA result
Concentration (% in (v/v) DFM |
mean dpm ± standard deviation |
Stimulation index |
Result |
Vehicle |
558.6 ± 308.7 |
1.0 |
Not applicable |
20 |
3128.6 ± 2613.3 |
5.6 |
Positive |
40 |
6086.8 ± 3463.8 |
10.9 |
Positive |
80 |
5263.2 ± 1935.4 |
9.4 |
Positive |
Positive control |
6467.6 ± 2983.5 |
11.6 |
Positive |
Endpoint conclusion
- Endpoint conclusion:
- adverse effect observed (sensitising)
- Additional information:
Two reliable in vivo skin sensitisation studies are available with the test substance (CAS 171869-89-9).
The key study is a LLNA test in mice according OECD 429 and in compliance with GLP (Dow Corning, 2005). The dose levels were selected based on an irritancy screen and were set to 20, 40 and 80%. The stimulation indices (SI) obtained with the test material at concentrations of 20, 40 and 80% in DMF (v/v) were greater than 3 in each case (5.6, 10.9 and 9.4%, respectively) with statistical evidence of a dose-response (Dow Corning, 2005). The stimulation indices were used to determine an EC3 value of 7%. Proper conduct of the study was verified by positive response (SI = 11.6) using α-hexylcinnamaldehyde as a positive control. Based on these results, the test substance is considered positive for contact sensitisation.
In a supporting study according to OECD 406 and in compliance with GLP the skin sensitising potential of the registration substance was assessed using guinea pig (Dow Corning, 2001). The method used was a modification of that described by Buehler, E.V. (1965), Delayed contact hypersensitivity in the guinea-pig. Based on the results of a preliminary study the test substance was applied as neat substance in the three induction applications as well as in the challenge application. In this study the test substance produced clear evidence of skin sensitisation in six animals of the twenty test animals (= 30%). Eight animals gave inconclusive responses and the remaining six of the twenty animals gave negative responses. As more than 15% of the animals gave positive responses, the test substance is considered to have the potential to cause skin sensitisation. All animals in the positive control group produced evidence of skin sensitisation following treatment with hexylcinnamaldehyde.
Respiratory sensitisation
Endpoint conclusion
- Endpoint conclusion:
- no study available
Justification for classification or non-classification
The available data on skin sensitisation meet the criteria for classification according to Regulation (EC) 1272/2008, and is therefore classified as Skin Sensitising Cat. 1B (H317).
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.