Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Physical & Chemical properties

Density

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
relative density
Type of information:
experimental study
Adequacy of study:
key study
Reliability:
2 (reliable with restrictions)
Rationale for reliability incl. deficiencies:
other: Guideline study
Qualifier:
according to guideline
Guideline:
OECD Guideline 109 (Density of Liquids and Solids)
Deviations:
no
Qualifier:
according to guideline
Guideline:
EU Method A.3 (Relative Density)
Deviations:
no
GLP compliance:
no
Type of method:
pycnometer method
Type:
relative density
Density:
1.436
Temp.:
20 °C
Type:
density
Density:
1.436 g/cm³
Temp.:
20 °C
Remarks on result:
other: First determination
Type:
density
Density:
1.435 g/cm³
Temp.:
20 °C
Remarks on result:
other: Second determination
Type:
density
Density:
1.436 g/cm³
Temp.:
20 °C
Remarks on result:
other: This value is the mean of two independent determinations with the maximum error of a single determination. Standard deviation was 0.0007 g/cm3, showing good correlation of the two determinations.
Conclusions:
Density = 1.4358 ± 0.0006 g/cm3 at 20 ± 0.4 °C;
Relative density = 1.4358 at 20 °C
The study was performed according to OECD TG109 and EU Method A.3 without deviations and therefore reliability of Klimisch 2 has been assigned.
Executive summary:

The density of the test substance was determined in a non-GLP test according to OECD 109 resp. EU A.3. Using the pycnometer method, a density of 1.4358 ± 0.0006 g/cm3 at 20 ± 0.4 °C was measured; the relative density of the test substance has the same number value, but no unit. This value is the mean of two independent determinations with the maximum error of a single determination (see table below). Standard deviation was 0.0007 g/cm3, showing good correlation of the two determinations.

Results of single determinations

 Determination  Density in g/cm3  Error of Determ. in g/cm3
 1  1.4363  0.0006
 2  1.4354  0.0006

Description of key information

Relative density: 1.4358 at 20°C, pycnometer method (OECD 109, GLP)

Key value for chemical safety assessment

Relative density at 20C:
1.436

Additional information