Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 810-490-5 | CAS number: 35501-23-6
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Skin irritation / corrosion
Administrative data
- Endpoint:
- skin irritation: in vitro / ex vivo
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- other: The study was conducted according to the appropriate OECD test guideline, and in compliance with GLP.
Data source
Reference
- Title:
- Unnamed
- Year:
- 2 015
- Report date:
- 2015
Materials and methods
Test guideline
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 439 (In Vitro Skin Irritation: Reconstructed Human Epidermis Test Method)
- Deviations:
- yes
- Remarks:
- The deviations did not influence the quality or integrity of the present study.
- GLP compliance:
- yes (incl. QA statement)
Test material
- Reference substance name:
- N-butyl-N-[(triethoxysilyl)methyl]butan-1-amine
- EC Number:
- 810-490-5
- Cas Number:
- 35501-23-6
- Molecular formula:
- C15H35NO3Si
- IUPAC Name:
- N-butyl-N-[(triethoxysilyl)methyl]butan-1-amine
- Reference substance name:
- N,N-Dibutylaminomethyl-triethoxysilan
- IUPAC Name:
- N,N-Dibutylaminomethyl-triethoxysilan
- Test material form:
- other: liquid
- Details on test material:
- Name: N,N-Dibutylaminomethyl-triethoxysilan
CAS No: 35501-23-6
Lot No: 310113
Physical State: liquid
Colour: colourless to yellowish
Storage Conditions: at room temperature, protected from light,
protected from water/ humidity
Purity: 97.7% (GC)
Stability: rapid hydrolysis in water
Date of analysis: 31 January 2013
Expiry Date: 21 January 2015
Constituent 1
Constituent 2
Test system
- Amount / concentration applied:
- TEST MATERIAL
- Amount(s) applied (volume or weight with unit): The liquid test item was applied undiluted. 30 µL of the test item were dispensed directly atop the EpiDerm(TM) tissue. Afterwards, a nylon mesh was used as spreading tool and carefully placed on the tissue surface. The compatibility of the test item with the nylon mesh was checked in a pre-test. - Details on study design:
- Test System:
The test was carried out with the reconstituted three-dimensional human skin model EpiDerm(TM) (MatTek). This skin model consists of normal (non-cancerous), human-derived epidermal keratinocytes (NHEK) which have been cultured to form a multilayered, highly differentiated model of the human epidermis. The NHEK are cultured on chemically modified, collagen-coated cell culture inserts (Millicell(R)). The EpiDerm(TM) skin model exhibits in vivo-like morphological and growth characteristics which are uniform and highly reproducible. It consists of organised basal, spinous, granular and cornified layers analogous to those found in vivo.
Provided Materials:
The EpiDerm(TM) tissues were provided as kits (EPI-200-SIT, MatTek), consisting of the following components relevant for this study:
1x sealed 24-well plate containing 24 inserts with tissues on Agarose (Lot: 19684 Kit C)
2x 24-well plates
8x 6-well plates
1x bottle of assay medium (DMEM-based medium, Lot: 100914 TMD)
1x bottle of DPBS Rinse Solution
1x 1 vial 5% SDS Solution (TC-SDS-5%)
25 pieces Nylon Mesh circles (8 mm diameter, 200 µm pore)
For MTT reduction assay the MTT assay kit (MTT-100; MatTek) was provided, consisting of:
1 vial MTT concentrate (Lot 092314MHA)
1 vial MTT diluent (supplemented DMEM; Lot 1553587)
1 bottle extractant solution (Isopropanol; Lot 072914ZSA)
Pre-Experiments:
To check the MTT-reducing capability of the test item 30 µL of the test item were mixed per 1 mL MTT medium and incubated for 1 h in an incubator at 37 ± 1 °C. If the mixture turns blue/purple, the test item is presumed to have reduced MTT.
To check the colouring potential of the test item 30 µL of the test item were mixed per 300 µL aqua dest. in a transparent recipient and incubated at 37 ± 1°C for 60 min.
Liquid test item was tested for mesh compatibility by applying 30 µL of the test item to a nylon mesh, placed on a slide. After 60 min. the mesh was examined microscopically. If the test item interacts with the mesh, it was applied without mesh as spreading aid.
Experimental Procedure:
Upon receipt of the EpiDerm(TM), the tissues were transferred into 6-well plates containing 0.9 mL pre-warmed assay medium per well. The 6-well plates were incubated overnight in a humidified incubator at 37 ± 1 °C, 5.0% CO2.
After this pre-incubation the tissues were treated with each dose group in triplicate, starting with the negative control. Start time was recorded with dosing of the first tissue staggered in one-minute intervals. After dosing of all tissues, all plates were transferred to the incubator for 35 ± 1 min. After 35 min, all plates were removed from the incubator and placed under the sterile flow until the 60 ± 1 min incubation time of the first dosed tissue were over. After 60 ± 1 min the tissues were washed intensively with DPBS, staggered in one-minute intervals. Excess DPBS was removed by blotting the bottom with blotting paper. The inserts were placed in a prepared 6-well plate containing 0.9 mL pre-warmed fresh assay medium and post-incubated at 37 ± 1 °C, 5.0% CO2, humidified to 95% for 24 ± 2 h. Following this incubation the tissues were transferred to new medium and incubated for additional 18 ± 2 h.
After this incubation period the inserts were transferred in a prepared 24-well plate containing 300 µL pre-warmed MTT medium and further incubated for 3 h ± 5 min at 37 ± 1 °C, 5.0% CO2, humidified to 95%.
After the 3 h ± 5 min MTT incubation period the tissues were rinsed three times with DPBS and afterwards placed on blotting paper to dry the tissues. The tissues were immersed in 2 mL isopropanol, sealed to inhibit evaporation and incubated at room temperature for at least two hours. At the end of the formazan extraction period the plate was mixed by shaking until the solution colour became homogeneous. Per each tissue 2 x 100 µL aliquots of the extract were mixed with 100 µL isopropanol and transferred into a 96-well plate and OD was measured at 550 nm without reference wavelength in a plate spectrophotometer.
Data Analysis:
Irritant potential of the test item was predicted from the relative mean tissue viabilities compared to the negative control tissues concurrently treated with DPBS. The test item is considered to be irritant to skin in accordance with regulation EC 1272/2008 (UN GHS Category 2), if the tissue viability after 15 min of exposure and 42 h of post-incubation is less or equal to 50%. The test substance may be considered as non-irritant to skin in accordance with UN GHS No Category if the tissue viability after exposure and post-treatment incubation is higher than 50%.
Mean tissue viability Prediction I / NI
(% negative control)
≤ 50 % Irritant (I): UN GHS Category 2
> 50 % Non-Irritant (NI): UN GHS No Category
Test Acceptance Criteria:
The test meets acceptance criteria if:
- mean OD550 nm of the three negative control tissues is ≥ 0.8 and ≤ 2.8
- mean relative tissue viability of the three positive control tissues is ≤ 20%
- standard deviation (SD) of relative tissue viability obtained from each three concurrently tested tissues is < 18%.
Results and discussion
In vitro
Results
- Irritation / corrosion parameter:
- other: other: relative tissue viability
- Value:
- 62.8
- Remarks on result:
- other:
- Remarks:
- Basis: other: mean optical density. Time point: After 60 min exposure and 42 h post incubation period . Max. score: 100.0. (migrated information)
In vivo
- Irritant / corrosive response data:
- The test item showed no irritant effects. The mean relative tissue viability (% negative control) was > 50% (62.8%) after 60 min treatment and 42 h post incubation.
The controls confirmed the validity of the study. The mean absolute OD550 of the three negative control tissues was ≥ 1 and ≤ 2.5. The mean relative tissue viability (% negative control) of the positive control was ≤ 20% (2.7%). The maximum standard deviation of viability of replicate tissues of all dose groups was < 18% (0.2% - 5.4%). - Other effects:
- The mixture of 30 µL test item per 1 mL MTT medium showed no reduction of MTT compared to the solvent. The mixture did not turn blue/purple.
The mixture of 30 µL / 25 mg of the test item per 300 µl aqua dest. showed no colouring detectable by unaided eye-assessment.
Microscopical examination of a nylon mesh treated for 60 min. with 30 µL of the test item showed no interactions. Therefore, the nylon mesh was used as spreading aid.
Applicant's summary and conclusion
- Interpretation of results:
- not irritating
- Remarks:
- Migrated information Criteria used for interpretation of results: EU
- Conclusions:
- In this study under the given conditions the test item showed no irritant effects. The test item is therefore classified as “non-irritant” in accordance with UN GHS “No Category”.
- Executive summary:
SUMMARY
In the present study the skin irritant potential of N,N-Dibutylaminomethyl-triethoxysilan was analysed.The EpiDerm™-Standard Model (EPI-200™), a reconstituted three-dimensional human epidermis model, was used as a replacement for the Draize Skin Irritation Test (OECD TG 404) to distinguish between UN GHS “Category 2” skin irritating test substances and not categorized test substances (“No Category”) which may be considered as non-irritant. Hereby, the test item was applied topically. Cytotoxicity is expressed as the reduction of mitochondrial dehydrogenase activity measured by formazan production from MTT after a60 min exposure and 42 h post incubation periodand compared to those of the concurrent negative controls.
In this study under the given conditions the test item showed no irritant effects. The relative mean tissue viability after 60 min of exposure and 42 h post incubation was> 50%. The test item is therefore classified as “non-irritant” in accordance with UN GHS “No Category”.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.