Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 700-903-6 | CAS number: 255830-15-0
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Adsorption / desorption
Administrative data
Link to relevant study record(s)
- Endpoint:
- adsorption / desorption, other
- Remarks:
- Batch equilibrium method
- Type of information:
- experimental study
- Adequacy of study:
- weight of evidence
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- guideline study with acceptable restrictions
- Remarks:
- Study well documented, includes study protocol; meets generally accepted scientific principles, acceptable for assessment.
- Principles of method if other than guideline:
- TEST DETAILS: 10 g of sediment were placed in a sample bottle, along with 800 ml test solution at concentrations of 0.05, 0.10, 1.0 and 5.0 ppm in purified water or synthetic hard water. The sample bottles were then shaken by hand and allowed to settle for 30 minutes. The solution temperature and pH was then measured and the pH adjusted to 6-8 where necessary. Aliquots were removed for Day 0 analysis and the bottles then placed on a shaker at 100 cycles/minute. The pH of the solutions was readjusted on sample days where necessary.
Test concentrations are equivalent to 40, 80, 800 and 4000 µg Dequest 2001 (active acid) respectively. - GLP compliance:
- no
- Type of method:
- batch equilibrium method
- Media:
- sediment
- Radiolabelling:
- yes
- Analytical monitoring:
- yes
- Details on matrix:
- TEST MEDIA: Purified water or synthetic hard water (hardness 211 ± 5 ppm as CaCO3), plus river sediment obtained from the National Bureau of Standards. Sediment pH = 7.3; Organic carbon content: 11.8%
- Details on test conditions:
- pH 6-8
- Sample No.:
- #1
- Phase system:
- solids-water in sediment
- Type:
- Kp
- Value:
- 1 270 L/kg
- pH:
- 7.3
- Matrix:
- Sediment with overlying soft water
- % Org. carbon:
- 11.8
- Remarks on result:
- other: Mean from values across a range of test substance concentrations after 1-8 days equilibration.
- Key result
- Sample No.:
- #2
- Phase system:
- solids-water in sediment
- Type:
- Kp
- Value:
- 1 500 L/kg
- pH:
- 7.3
- Matrix:
- Sediment with overlying hard water
- % Org. carbon:
- 11.8
- Remarks on result:
- other: Mean from values across a range of test substance concentrations after 1-8 days equilibration.
- Adsorption and desorption constants:
- Desorption: test substance could not be analysed in the solid phase due to effectively irreversible binding.
- Transformation products:
- not measured
- Conclusions:
- Rapid and high adsorption of ATMP to natural sediment with both soft and hard overlying waters was determined in a reliable study conducted according to generally accepted scientific principles.
- Endpoint:
- adsorption / desorption: screening
- Type of information:
- experimental study
- Adequacy of study:
- weight of evidence
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- guideline study with acceptable restrictions
- Remarks:
- The study was conducted in accordance with OECD 106 but not in compliance with GLP.
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 106 (Adsorption - Desorption Using a Batch Equilibrium Method)
- GLP compliance:
- no
- Type of method:
- batch equilibrium method
- Media:
- soil
- Radiolabelling:
- no
- Test temperature:
- 20 ± 2°C
- Details on sampling:
- - Concentrations: 4.5 mg/l
- Sampling interval:
- Sample storage before analysis: The samples were stored in the refrigerator prior to analysis - Details on matrix:
- COLLECTION AND STORAGE
- Storage conditions: the soils were stored at 3 ± 2°C prior to use
PROPERTIES
- Soil order: loam, sandy loamy, humic soil
- pH: 7.3 (loam), 7.6 (sandy loamy), 4.6 (humic soil)
- Organic carbon (%): 1.5 (loam), 3.2 (sandy loamy), 4.2 (humic soil)
- Carbonate as CaCO3: 7.8% (loam), 7.7 (sandy loamy), 0.1% (humic soil) - Sample No.:
- #1
- Duration:
- 16 h
- Temp.:
- 20
- Sample no.:
- #1
- Duration:
- 20 h
- Temp.:
- 20
- Type:
- Kd
- Value:
- > 220
- Temp.:
- 20 °C
- Remarks on result:
- other: The overall binding coefficient for this type of substance is more relevant than Koc
Referenceopen allclose all
ANALYSIS: Analysis was performed on days 0, 1, 2, 4 and 8. The concentration of the test substance in water was determined by liquid scintillation counting. The concentration in sediment was then calculated by difference, based on the assumption that any reduction in water concentration was due to adsorption to sediment. Due to the high level of adsorption significant change in aqueous concentration occurred, and therefore analysis of the soil was not essential.
K(sediment-water) values are expressed in litres/kilogram for soft water
Day 0 |
Day 1 |
Day 2 |
Day 4 |
Day 8 |
|
0.05 ppm |
360 |
1100 |
720 |
1300 |
1200 |
0.10 ppm |
180 |
1200 |
1000 |
1200 |
1500 |
1.0 ppm |
39 |
360 |
450 |
810 |
1100 |
5.0 ppm |
13 |
170 |
52 |
170 |
340 |
K(sediment-water) values are expressed in litres/kilogram for hard water
Day 0 |
Day 1 |
Day 2 |
Day 4 |
Day 8 |
|
0.05 ppm |
590 |
1300 |
1200 |
1200 |
1600 |
0.10 ppm |
590 |
1300 |
1500 |
1500 |
1500 |
1.0 ppm |
87 |
1000 |
1400 |
1600 |
1400 |
5.0 ppm |
140 |
230 |
650 |
930 |
1000 |
The 5.0 ppm test concentration may not have reached
equilibrium over the test period due to saturation of some
of the sediment adsorption sites. Therefore, a mean value
applicable to soft water is 1270 l/kg, and to hard water,
1500 l/kg.
Table 1: Percentage adsorbed test substance (A), % of the adsorbed test substance which was not desorbed (R), the adsorption coefficient based on total soil and the adsorption constant based on the organic matter content of soils.
Soil |
A (%) |
R (%) |
K (ml/g) |
Kom (ml/g) |
Humic sand soil |
100 |
100 |
>220* |
>5200* |
Sandy loam soil |
100 |
100 |
>220* |
>6800* |
Loam soil |
100 |
100 |
>220* |
>14600* |
*caused by detection level of test substance
Reviewer's comment:
Koc values of >5200, >6800 and >14600 ml/g was determined for organic content of humic sand soil, sandy loam soil and loam soil respectively. These values suggest a strong adsorption of the substance to organic matter. However, the nature of adsorption of phosphonates is believed to be due primarily to interaction with inorganic substrate. The proportion of adsorbed test substance which was not desorbed was found to be 100%, this implies the adsorption is not reversible. However, the actual value of Kd (not quantified - the result is a limit value only), could be much higher than obtained.
Description of key information
The substance adsorbs significantly to sediment, soil and sludge substrates based on the available study data. It is believed that the binding to organic carbon is not predominant, however it is useful for general context to note that Kd values appear consistent with a log Koc(equivalent) value of approximately 4.
Adsorption (ATMP-N-oxide-5K): log Koc = 4.07, Kd = >220 ml/g
Key value for chemical safety assessment
Other adsorption coefficients
- Type:
- log Kp (solids-water in soil)
- Value in L/kg:
- 2.78
- at the temperature of:
- 12 °C
Other adsorption coefficients
- Type:
- log Kp (solids-water in sediment)
- Value in L/kg:
- 3.18
- at the temperature of:
- 12 °C
Other adsorption coefficients
- Type:
- log Kp (solids-water in suspended matter)
- Value in L/kg:
- 3.18
- at the temperature of:
- 12 °C
Other adsorption coefficients
- Type:
- log Kp (solids-water in raw sewage sludge)
- Value in L/kg:
- 5
- at the temperature of:
- 12 °C
Other adsorption coefficients
- Type:
- log Kp (solids-water in settled sewage sludge)
- Value in L/kg:
- 5
- at the temperature of:
- 12 °C
Other adsorption coefficients
- Type:
- log Kp (solids-water in activated sewage sludge)
- Value in L/kg:
- 5.08
- at the temperature of:
- 12 °C
Other adsorption coefficients
- Type:
- log Kp (solids-water in effluent sewage sludge)
- Value in L/kg:
- 5.08
- at the temperature of:
- 12 °C
Additional information
In a reliable study conducted according to OECD 106, ATMP-N-Oxide-5K was found to completely adsorbed to soil samples with an adsorption coefficient based on total soil determined to be >220 ml/g (Kd). The percentage of adsorbed test substance which was not desorbed was found to be 100%, this implies the adsorption is not reversible. However, the actual value of Kd (not quantified - the result is a limit value only), could be much higher than obtained.
Additional adsorption values and data for ATMP-N-oxide-5K have been read-across from ATMP-H using a category approach, this is because phosphonates share a common chemistry incorporating alkyl backbones with one or more tertiary amine centres and multiple methylphosphonate groups.
The normal approach to modelling binding behaviour in environmental exposure assessment takes its approach from an inherent assumption that the substance is binding only to the organic components of substrates (i.e. organic carbon present in soils, sediments, and WWTP sludges). This assumption does not apply to aminomethylene phosphonates.
This substance is a mineral-binding and complexing agent, with unusual chemical properties. ATMP-N-oxide-5K adsorbs strongly to inorganic surfaces, soils and sediments, in model systems and mesocosms, despite the very low log Kow; this has implications for the approach to environmental fate modelling. High adsorption is consistent with similar behaviour seen for structural analogues, and other common complexing agents such as EDTA.
Studies on analogous phosphonate complexing agents have revealed that adsorption is correlated with concentration in the aqueous phase and also relates significantly to the type and nature of inorganic content in the substrate.
The normal approach to modelling binding behaviour in environmental exposure assessment assumes that the substance is binding only to the organic carbon present in soils, sediments, and WWTP sludges. This assumption does not apply to ATMP and its salts. The extent of binding to substrates is fundamental to understanding and modelling of environmental exposure, for substances like this. Therefore, adsorption / desorption data, required in Section 9.3.1 of Annex IX, are an extremely important part of the data set for ATMP-N-oxide-5K.
The nature of the adsorption is believed to be primarily due to interaction with inorganic substrate or generalised surface interactions. While Koc is the conventional indicator for adsorption, the interaction with organic carbon present in the substrate may be exceeded by these other interactions in the case of ATMP and its salts, meaning that Koc as such is not a meaningful parameter. It is convenient for comparison purposes to determine the value of log Koc that is consistent/equivalent to the degree of sediment or soil binding exhibited by the substance. Thus, a log Koc(equivalent) value of approximately 4 was obtained by evaluating Kp(sediment-water) data in a reliable study conducted according to generally accepted scientific principles (Michael, 1979). River sediments were analysed by using liquid scintillation on day 0, 1, 2, 4, 8. Methods and sample data were represented clearly and the test substance was being described adequately. The result considered as reliable and has been assigned as key study.
From other various sources, adsorption to goethite (a common iron(III) oxyhydroxide mineral present in soils) has been studied and reported in three separate papers. Approximately 100% adsorption at pH8; approximately 50% at pH 10 and negligible adsorption at pH 12 was seen in the absence of metal ions; the presence of zinc(II), copper(II) and iron(III) ions has a negligible effect on adsorption to the goethite (Nowack and Stone, 1999a). In the presence of calcium, the adsorption of ATMP to goethite increases significantly (Nowack and Stone, 1999b). These data are of non-assignable reliability. Adsorption of 30 μM/g at pH 7.2 is reported (Stone and Knight, 2002).
Adsorption to wastewater treatment plant sludge has been reported in two further studies: >90% adsorption within 24 hours was reported by Gledhill and Feijtel (1992).
The presence of calcium in solution tends to significantly increase the adsorption of ATMP. In natural waters this will play a part in the fate of ATMP, particularly in slightly alkaline waters.
The key data are in the study by Michael (1979). Given that the sediment was not analysed, it is necessary to review the conclusions drawn. It is reasonable to assume that removal from the water column would be due to adsorption to sediment, given that:
• the relatively high concentration makes it unlikely to be due to adsorption to glassware
• significant biodegradation can be ruled out
• there are no other likely explanations of removal from the water.
Adsorption proportions can vary across a relatively wide range with e.g. differing soil types/characteristics and loading concentration. Surface area may also have a role in the quantitative partitioning in any given case. No convincing, consistent explanations have been reached by the authors of the various studies/ papers as to a consistent means to predict Kd. Best use must therefore be made of the available results for sediments and soils for each substance.
There is no evidence for desorption occurring. Effectively irreversible binding is entirely consistent with the known behaviour of complexation and binding within crystal lattices. The high levels of adsorption which occur are therefore a form of removal from the environment. After 38-50 days, the phosphonate is >95% bound to sediment with only 5% extractable by ultrasonication and use of 0.25N HCl xylene solvent (based on radiolabelling) in river and lake water microcosms. (Saeger, 1977, see IUCLID section 5.2.2).
In the context of the exposure assessment, largely irreversible binding is interpreted as a removal process; 5% remaining after 40 - 50 days is equivalent to a half-life of 10 days which is significant for the environmental exposure assessment in the regional and continental scales.
Note on relevance of the HPLC Screening Method for phosphonates
A screening study using the conventional HPLC method (OECD 121) to estimate the value of Koc (organic carbon-water partition coefficient) is considered not appropriate. Adsorption behaviour onto the normal aminopropyl column used in OECD 121 would not necessarily follow the pattern of adsorption onto substrates that are of importance in the environment. Understanding of sludge binding is informative, but much less significant in the chemical safety assessment than binding to matrices with a higher inorganic content or high surface area. It is important to understand Kd directly, and preferably as a function of variables such as solid phase composition and characteristics, water hardness, dilutions, and phase ratios.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.