Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 215-607-8 | CAS number: 1333-82-0
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Toxicity to aquatic algae and cyanobacteria
Administrative data
Link to relevant study record(s)
- Endpoint:
- toxicity to aquatic algae and cyanobacteria
- Type of information:
- experimental study
- Adequacy of study:
- supporting study
- Study period:
- 1978 to 1990
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- other: see 'Remark'
- Remarks:
- The EU RAR summarises results from a number of algal studies which, individually, have limitations regarding study design and reliability. However, the results of these studies when taken as a whole, provide an adequate assessment of the toxicity to algae. The data are considered to fulfil the criteria laid down in Annex XI to Regulation 1907/2006: adequate for classification and labelling, adequate coverage of key parameters (growth inhibition), exposure duration comparable or longer that Article 13(3) methods (72 hours), adequate documentation provided: EU RAR, of which parts have been copied to this endpoint record. Reliability for endpoint also increased based on test results from several species.
- Qualifier:
- no guideline followed
- Guideline:
- other: range of studies included
- Principles of method if other than guideline:
- Several studies, collectively, provide a weight-of-evidence to support toxicity to algae
- GLP compliance:
- no
- Analytical monitoring:
- yes
- Details on sampling:
- Various sampling procedures based on multiple studies
- Vehicle:
- no
- Details on test solutions:
- Various test media prepared based on multiple studies in freshwater and brackish water
- Test organisms (species):
- other: Range of species tested
- Test type:
- static
- Limit test:
- no
- Remarks on exposure duration:
- Range used from several studies
- Post exposure observation period:
- None reported
- Hardness:
- Range used from several studies
- Test temperature:
- Range used from several studies
- pH:
- Range used from several studies
- Dissolved oxygen:
- Not applicable
- Salinity:
- Range used from several studies
- Nominal and measured concentrations:
- Range used from several studies
- Details on test conditions:
- Range used from several studies
- Reference substance (positive control):
- no
- Details on results:
- Potassium dichromate is recommended as a reference substance in the algal inhibition test (Method C.3; EEC, 1992). A ring test involving 16 laboratories determined the mean 72h-EC50 values for Scenedesmus subspicatus and Selenastrum capricornutum. The mean and range of the
values obtained (for the two species combined) are shown below on both a K2Cr2O7- concentration basis (EEC, 1992) and also converted to the equivalent chromium concentration.
Endpoint mean value range:
EC50(growth rate) 0.84 mg K2Cr2O7/l 0.6-1.03 mg K2Cr2O7/l =0.30 mg Cr/l =0.21-0.36 mg Cr/l
EC50(biomass) 0.53 mg K2Cr2O7/l 0.20-0.75 mg K2Cr2O7/l =0.19 mg Cr/l =0.071-0.26 mg Cr/l.
Most of the algal toxicity data have been generated with potassium dichromate. Where comparison is possible, the toxicity of sodium chromate or sodium dichromate, when expressed on a total chromium basis, does not appear to be significantly different from that of potassium dichromate. This is as would be expected if the equilibria between the chromate and dichromate anions are established in the test medium. Little information is available for ammonium dichromate and chromic acid, but it would be expected that their toxicity would be similar to that of the other chromates/dichromates, when expressed on a total chromium concentration basis.
The available EC50 values for algae and plants range from 0.13 to 4.6 mg/l Cr; NOEC values are in the range 0.01 to 0.64 mg/l Cr.
With marine algae, salinity and sulphate ion concentration have been shown to be important factors in determining the toxicity of chromium (VI). The toxicity of chromium (VI) is generally highest at low salinities (<2‰) and low sulphate ion concentrations (Riedel, 1984 and 1985;Frey et al., 1983). At higher salinities, marine alga appears to be of similar or slightly lower sensitivity as freshwater algae.
Riedel (1985) studied the uptake of chromium (VI) (as potassium dichromate) by the marine diatom Thalassiosira pseudonana at low salinities (0.32-3.2‰) and sulphate ion concentrations. It was found that the rate of uptake of chromium (VI) was approximately linear with time, proportional to the aqueous chromium (VI) concentration and inversely proportional to the aqueous sulphate concentration. The concentration of chromium (VI) that inhibited cell growth also inhibited sulphate uptake. - Validity criteria fulfilled:
- yes
- Conclusions:
- Based on a review of existing algal data from the EU RAR, an acceptable assessment of toxicity was achieved.
- Executive summary:
From the EU RAR, most of the algal toxicity data have been generated with potassium dichromate. Where comparison is possible, the toxicity of sodium chromate or sodium dichromate, when expressed on a total chromium basis, does not appear to be significantly different from that of potassium dichromate. This is as would be expected if the equilibria between the chromate and dichromate
anions are established in the test medium. Little information is available for ammonium dichromate and chromic acid, but it would be expected that their toxicity would be similar to that of the other chromates/dichromates, when expressed on a total chromium concentration basis.
The available EC50 values for algae range from 0.13 to 4.6 mg/l Cr; NOEC values are in the range 0.01 to 0.64 mg/l Cr. With marine algae, salinity and sulphate ion concentration have been shown to be important factors in determining the toxicity of chromium (VI). The toxicity of chromium (VI) is generally highest at low salinities (<2‰) and low sulphate ion concentrations (Riedel, 1984 and 1985; Frey et al., 1983). At higher salinities, marine alga appears to be of similar or slightly lower sensitivity as freshwater algae.
- Endpoint:
- toxicity to aquatic algae and cyanobacteria
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- not specified
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- test procedure in accordance with generally accepted scientific standards and described in sufficient detail
- Qualifier:
- according to guideline
- Guideline:
- other: DIN 38 412
- Version / remarks:
- Part 9
- GLP compliance:
- not specified
- Analytical monitoring:
- not specified
- Vehicle:
- no
- Details on test solutions:
- PREPARATION AND APPLICATION OF TEST SOLUTION (especially for difficult test substances)
- Method: In order to produce the test solutions, water-soluble substances were quantitatively dissolved to produce an optically clear stock solution in 800 mL double-distilled water using magnetic stirrers (maximum 24 h). Optically unclear solutions were filtered through fibre-glass filters (Selecta No. 6) and the filtrate was quantified chemically. Before beginning the test, the stock solutions were adjusted to pH 8.0 +/- 0.3. From the test stock solution and from sterile double distilled water as the diluent, dilution series with various volume ratios were set up.
- Controls: yes, prepared from dilution water, nutrient solution and algal suspension
- Test concentration separation factor: Dilution steps with a dilution series of 1:2 (f=2) each had one part of test substance solution in 2^0-2^8 volumes of mixture. - Test organisms (species):
- Desmodesmus subspicatus (previous name: Scenedesmus subspicatus)
- Details on test organisms:
- TEST ORGANISM
- Strain no.: 8681 SAG
- Source (laboratory, culture collection): in-houselaboratory culture maintained over a number of decades in submerged culture
- Age of inoculum (at test initiation): 3 days
- Method of cultivation: For the maintainance of the green algal species in a submerged culture, sterilised 100 mL Erlenmeyer flasks were filled with 20 mL nutrient solution (for stock cultures) and inoculated with 2 mL cell suspension taken from a 10-day old stock culture. The inoculated flasks were placed on a white surface, protected from daylight and exposed to constant lighting from two parallel fluorescent Osram 40 W/30 tubes (distance from each tube 60 cm: irradiance E0, Sy = 24.9 W/m^2) at 24 +/- 1°C and relative humidity of 50%. To maintain the test strain, fresh stock cultures were prepared at 10-day intervals.
ACCLIMATION
- Acclimation period: The cultivation of the preliminary cultures was undertaken 3 days prior to the preparation of the test solution. 50 mL nutrient solution (for test cultures) were filled into 300 mL Erlenmeyer flasks and inoculated with cell suspension from 7-day-old stock cultures. The cell concentration in the preliminary culture flasks must amount to 104.ml-L This was to ensure that the culture was still in a process of logarithmic growth after 72 h.
- Culturing media and conditions (same as test or not): Light and temperature conditions of the preliminary culture corresponded to those for the test preparation. The composition of the nutrient solution used for culturing is presented in section "Any other information on materials and methods incl tables". - Test type:
- static
- Water media type:
- freshwater
- Limit test:
- no
- Total exposure duration:
- 96 h
- Test temperature:
- not specified
- pH:
- between 8.0 and 9.3
- Dissolved oxygen:
- not specified
- Nominal and measured concentrations:
- nominal: 0.08 - 10 mg/L
- Details on test conditions:
- TEST SYSTEM
- Test vessel: 300 mL Erlenmeyer flasks with metal caps
- Type: closed (sterila)
- Material, size, headspace, fill volume: 300 mL Erlenmeyer flasks filled with 250 mL test solution
- Initial cells density: 10^4 mL^-1
- Control end cells density: 1.8x10^6 mL^-1
- No. of vessels per concentration (replicates): 8 (thus, on each measurement day two flasks from each concentration were available for measurement)
- No. of vessels per control (replicates): 8 (thus, on each measurement day two flasks were available for measurement)
GROWTH MEDIUM
- Standard medium used: Yes, nutrient solution for the test preparation according to DIN Test Procedure L9.
TEST MEDIUM / WATER PARAMETERS
- Source/preparation of dilution water: Nutritient solution and destilled water. The composition and information on the preparation of the test medium is presented in section "Any other information on materials and methods incl. tables".
OTHER TEST CONDITIONS
- Adjustment of pH: yes, at test start in stock solutions of test substance to pH 8.0 +/- 0.3
- Photoperiod: constant lighting
- Light intensity and quality: The light was provided by Osram L 25/40 fluorescent tubes; each of the positions for the test solutions had an irradiance E=17.0 W/m^2.
- Other: The control and test preparations were shaken daily.
EFFECT PARAMETERS MEASURED (with observation intervals if applicable) :
- Determination of cell concentrations: via extinction measurement of the monochromatic radiation (578 nm); biomass was determined by measurement of optical density (measurement of turbidity)
- Equipment: Eppendorf digital photometer 6115 S with a facility to measure turbidity, filter 578 nm
- Intervals: Measurements were made at the beginning of the test and after 24, 48, 72 and 96 hours of test duration.
TEST CONCENTRATIONS
- Spacing factor for test concentrations: 2 - Key result
- Duration:
- 72 h
- Dose descriptor:
- EC50
- Effect conc.:
- 10 mg/L
- Nominal / measured:
- nominal
- Conc. based on:
- test mat.
- Basis for effect:
- growth rate
- Duration:
- 72 h
- Dose descriptor:
- EC50
- Effect conc.:
- 0.38 mg/L
- Nominal / measured:
- nominal
- Conc. based on:
- test mat.
- Basis for effect:
- biomass
- Key result
- Duration:
- 72 h
- Dose descriptor:
- EC10
- Effect conc.:
- 1.8 mg/L
- Nominal / measured:
- nominal
- Conc. based on:
- test mat.
- Basis for effect:
- growth rate
- Duration:
- 72 h
- Dose descriptor:
- EC10
- Effect conc.:
- 0.09 mg/L
- Nominal / measured:
- nominal
- Conc. based on:
- test mat.
- Basis for effect:
- biomass
- Duration:
- 48 h
- Dose descriptor:
- EC50
- Effect conc.:
- 13 mg/L
- Nominal / measured:
- nominal
- Conc. based on:
- test mat.
- Basis for effect:
- growth rate
- Duration:
- 48 h
- Dose descriptor:
- EC50
- Effect conc.:
- 0.55 mg/L
- Nominal / measured:
- nominal
- Conc. based on:
- test mat.
- Basis for effect:
- biomass
- Duration:
- 48 h
- Dose descriptor:
- EC10
- Effect conc.:
- 2.1 mg/L
- Nominal / measured:
- nominal
- Conc. based on:
- test mat.
- Basis for effect:
- growth rate
- Duration:
- 48 h
- Dose descriptor:
- EC10
- Effect conc.:
- 0.15 mg/L
- Nominal / measured:
- nominal
- Conc. based on:
- test mat.
- Basis for effect:
- biomass
- Details on results:
- - Exponential growth in the control (for algal test): yes
- Observation of abnormalities (for algal test): no
- Any stimulation of growth found in any treatment: no - Reported statistics and error estimates:
- The data were evaluated in line with the DIN Standard. Growth curves were etsablished for each tested concentration of the test materail and for the control. The area under the growth curves (integral of the biomass with time) was calculated according to the given equation and from this the "percentage inhibition of cell multiplication (H_B) during the test for each tested concentration level on the basis of a comparison of the biomass formed under the influence of the substance (B_T) with the biomass in the control (B_K)" was calculated. The average growth rate for cultures showing exponential growth was calculated, the basis being the time between the beginning of the test and 72 h later. On this basis the growth-related inhibition (Hµ) was calculated from the difference between the growth rates (µ_k - µ_T) and the growth rate µ_K in the control. The tested concentrations were assigned to the respective inhibition values in the probability paper. The regression line was determined and from this the desired values EBC10 and EBC50 and/or EµC10 and EµC50 could be read.
- Validity criteria fulfilled:
- yes
- Conclusions:
- A growth inhibition study was conducted with the freshwater green-algal species Scenedesmus subspicatus to determine the toxicity of potassium dichromate to aquatic algae and cyanobacteria. The test was conducted according to Standard Protocol DIN 38 412 (Part 9), the procedure is well described and the validity criteria were met. Hence, the results can be considered to be reliable and acceptable to assess the hazard of the registered substance to aquatic algae.
During the test an initial cell density of 10^5 algal cells per mL was exposed to several concentrations of the test material under sterile static test conditions for a period of 96 hours. A control group was running in parallel. The biomass was determined daily by measurement of the optical density for each test vessel and the obtained results were used to determine the effect on algal growth compared to the control cultures. Based on the obtained results the 72h EC10 and the 72h EC50 value for the parameter growth rate (EµC50) were determined to be 1.8 and 10 mg/L, respectively. The 72 EC10 and the 72h EC50 for the parameter biomass (EbC50) were determined to be 0.09 and 0.38 mg/L, respectively. - Executive summary:
In the Scenedesmus cell multiplication inhibition test, 68 potentially hazardous substances were examined to determine the effect concentrations (EC). One of them was potassium dichromate. The tests were conducted in accordance with the test procedure DIN 38 412, Part 9 (draft standard). The green alga Scenedesmus subspicatus CHODAT was cultivated as the test organism. During the test an initial cell density of 10^5 algal cells per mL was exposed to several concentrations of the test material under sterile static test conditions for a period of 96 hours. A control group was running in parallel. The biomass was determined daily by measurement of the optical density for each test vessel and the obtained results were used to determine the effect on algal growth compared to the control cultures.
Based on the obtained results the 72h EC10 and the 72h EC50 value for the parameter growth rate (EµC50) were determined to be 1.8 and 10 mg/L, respectively. The 72h EC10 and the 72h EC50 for the parameter biomass (EbC50) were determined to be 0.09 and 0.38 mg/L, respectively.
In a comparison of the concentrations of the EBC10 for Scenedesmus with those of the corresponding NOEC for Daphnia magna - bearing in mind that the values are not based on the same measurement - it was shown that both endpoints are quite similar for potassium dichromate and therefore comparable. However, for risk assessment the ECx values for the parameter growth rate will be used as key results.
Referenceopen allclose all
The results of the algal toxicity studies evaluated in the EU RAR are summarised below.
Species |
Endpoint: |
Value (mg/L) |
Reference |
Algae - freshwater |
|||
Chlamydomonas sp |
10 d NOEC (g)c |
0.5 |
Cairns Jr. et al. (1978) |
Chlorella vulgaris |
72 h IC50 (g) |
0.47 |
Jouany et al. (1982) |
Chlorella pyrenoidosa |
96 h NOEC (b) |
0.1 |
Meisch and Schmitt-Beckmann (1979) |
Chlorella sp (wild) |
96 h NOEC (b) |
0.1 |
Meisch and Schmitt-Beckmann (1979) |
Lyngbya (blue-green) |
18 d NOEC (g)c |
0.1 |
Cairns Jr. et al. (1978) |
Microcystis aeruginosa (bluegreen) |
96 h NOEC (g) |
0.35 |
Sloof and Canton (1983) |
Scenedesmus pannonicus |
96 h NOEC |
0.11 |
Sloof and Canton (1983) |
Scenedesmus subspicatus |
72 h EC50 (g) |
4.6 |
Kuhn and Pattard (1990) |
72 h EC10 (g) |
0.64 |
||
72 h EC50 (b) |
0.13 |
||
72 h EC10 (b) |
0.032 |
||
Selenastrum capricornutum |
72 h IC50 (g) |
0.99 |
Nyholm (1991) |
72 h IC10 (g) |
0.11 |
||
96 h EC50 (b) |
0.217 |
Greene et al. (1988) |
|
72 h EC50 (g) |
0.233 |
Christensen et al. (1983) Christensen and Nyholm (1984) |
|
72 h EC10 (g) |
0.01 |
||
Algae- brackish water |
|||
Thalassiosira pseudonana |
EC50 |
0.341 |
-l Riedel(1984) |
a NOEC calculated as LOEC/2 from paper, effect of 14%; (b) - biomass; (g) – growth
b sodium chromate tested; all others used potassium dichromate. All concentrations as Cr.
c duration of test too long for inclusion in PNEC derivation.
d study rated as IIIb
Description of key information
1)
Key_ Toxicity to aquatic algae and cyanobacteria by summary of data from
European Union Risk Assessment Report: chromium trioxide, sodium
chromate, sodium dichromate, ammonium dichromate and potassium
dichromate; 3rd. Priority List; Volume 53: range for EC50: 0.13 to 4.6
mg/L Cr; range for NOEC: 0.01 to 0.64 mg/L Cr for several species from
various studies with different test durations ranging from 3 to 18 days.
2)
Key_Toxicity to aquatic algae and cyanobacteria: 72h-EC50 (growth rate):
10 mg/L K2Cr2O7; 72h-EC10 (grwoth
rate): 1.8 mg/L K2Cr2O7; for Desmodesmus
subspicatus according to DIN 38 412 (comparable to OECD TG 201)
Key value for chemical safety assessment
- EC50 for freshwater algae:
- 0.13 mg/L
- EC10 or NOEC for freshwater algae:
- 0.01 mg/L
Additional information
1) From the EU RAR, most of the algal toxicity data have been generated with potassium dichromate. The available EC50 values for algae range from 0.13 to 4.6 mg/L Cr; NOEC values are in the range 0.01 to 0.64 mg/L Cr. With marine algae, salinity and sulphate ion concentration have been shown to be important factors in determining the toxicity of chromium (VI). The toxicity of chromium (VI) is generally highest at low salinities (<2‰) and low sulphate ion concentrations. At higher salinities, marine alga appears to be of similar or slightly lower sensitivity as freshwater algae.
2) In the Scenedesmus cell multiplication inhibition test, 68 potentially hazardous substances were examined to determine the effect concentrations (EC). One of them was potassium dichromate. The tests were conducted in accordance with the test procedure DIN 38 412, Part 9 (draft standard). The green alga Scenedesmus subspicatus CHODAT was used as test organism and exposed to several concentrations of the test material under sterile static test conditions for a period of 96 hours. A control group was running in parallel. Based on the obtained results the 72h EC10 and the 72h EC50 value for the parameter growth rate (EµC50) were determined to be 1.8 and 10 mg/L, respectively. The 72h EC10 and the 72h EC50 for the parameter biomass (EBC50) were determined to be 0.09 and 0.38 mg/L, respectively.
In a comparison of the concentrations of the EBC10 for Scenedesmus with those of the corresponding NOEC for Daphnia magna - bearing in mind that the values are not based on the same measurement - it was shown that both endpoints are quite similar for potassium dichromate and therefore comparable. However, for risk assessment the ECx values for the parameter growth rate will be used as key results.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.