Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 470-780-9 | CAS number: 55312-97-5
Guidance on Safe Use
Guidance on Safe Use
Currently viewing:
Administrative data
First-aid measures
Emergency measure - Inhalation: In case of accident by inhalation: remove casaulty to fresh air an keep at rest. Call a physician. Emergency measure - Eyes: Rinse with plenty of water for at least 15 minutes also under the eyelids and consult a physician. Emergency measure - Skin: Remove contaminated clothing immediately. Wash off with soap and plenty of water. If symptoms persist, call a physician. Emergency measure - Ingestion: Do not induce vomiting. Rinse mouth with water. Consult a physician.
Fire-fighting measures
Recommended extinguishing agent: Water spray, foam, carbon dioxide, dry powder, sand.
Product arising from burning: Carbon monoxide, carbon dioxide, water, hydrogen chloride.
Product determined by test: N
Protective equipment: In case of fire wear self contained breathing apparatus.
Use water spray to cool unopened containers.
Product arising from burning: Carbon monoxide, carbon dioxide, water, hydrogen chloride.
Product determined by test: N
Protective equipment: In case of fire wear self contained breathing apparatus.
Use water spray to cool unopened containers.
Accidental release measures
Emergency measures in case of spillage: Avoid any contact with spilt product or contaminated
surfaces.
Wear personal protective equipment (see 2.3.10).
Unprotected persons must be kept away.
Soak up or pump off spillage and collect in suitable
tightly closed waste containers which have to be labelled
according to TRGS 201.
Dispose according to local regulations.
Do not flush into surface water or sanitary sewer system.
surfaces.
Wear personal protective equipment (see 2.3.10).
Unprotected persons must be kept away.
Soak up or pump off spillage and collect in suitable
tightly closed waste containers which have to be labelled
according to TRGS 201.
Dispose according to local regulations.
Do not flush into surface water or sanitary sewer system.
Handling and storage
This substance is handled under Strictly Controlled Conditions in accordance with REACH regulation Article 17(3) for on-site isolated intermediates and, in case the substance is transported to other sites for further processing, the substance should be handled at these sites under the Strictly Controlled Conditions as specified in REACH regulation Article 18(4). Site documentation to support safe handling arrangements including the selection of engineering, administrative and personal protective equipment controls in accordance with risk-based management systems is available at each manufacturing site.
Handling: Working procedures must always be designed so that contact with the skin and eyes is excluded. Avoid inhalation of the substance. As far as possible, closed equipment has to be used during transfer and metered feeding as well as during sampling. In the case of handling the substance in open systems, extract any vapours or aerosols which might form directly at the point of origin. If technical extraction or ventilation measures are not possible or are insufficient, suitable respiratory protection (e.g. filter apparatus, Filter ABEK-P2) must be worn. Even if skin contact is only possible for short periods, tested protective gloves (e.g. made of nitrile rubber) and suitable protective clothing must be worn. Safe eye protection (e.g. tight-fitting safety goggles) is absolutely essential. Adequate washing facilities and conspicuously labelled eye-douche stations should be provided in the immediate vicinity of the working area. After contact with the skin, the affected parts of the body should be immediately thoroughly cleaned using soap and plenty of water. Contaminated clothing must be changed immediately. Special skin-protection and skin-care measures are recommended. A skin-protection plan must be drawn up. If vapours or aerosols can develop, due to the potential explosion risk, potential sources of ignition should be removed out of the working area. In addition, measures should be taken to prevent electrostatic discharges. Storage: Store the substance in the original containers in a dry, cool and well-ventilated place. Keep them tightly closed and secure them against falling by taking the appropriate measures. Avoid residues on the outside of the containers. Do not store in heat or direct sunlight. Keep away from food, drink and animal feeding stuffs. Apply the VCI concept for the Mixed Storage of Chemicals. Packaging of the substance and or preparation: Drums, 200 L.
Handling: Working procedures must always be designed so that contact with the skin and eyes is excluded. Avoid inhalation of the substance. As far as possible, closed equipment has to be used during transfer and metered feeding as well as during sampling. In the case of handling the substance in open systems, extract any vapours or aerosols which might form directly at the point of origin. If technical extraction or ventilation measures are not possible or are insufficient, suitable respiratory protection (e.g. filter apparatus, Filter ABEK-P2) must be worn. Even if skin contact is only possible for short periods, tested protective gloves (e.g. made of nitrile rubber) and suitable protective clothing must be worn. Safe eye protection (e.g. tight-fitting safety goggles) is absolutely essential. Adequate washing facilities and conspicuously labelled eye-douche stations should be provided in the immediate vicinity of the working area. After contact with the skin, the affected parts of the body should be immediately thoroughly cleaned using soap and plenty of water. Contaminated clothing must be changed immediately. Special skin-protection and skin-care measures are recommended. A skin-protection plan must be drawn up. If vapours or aerosols can develop, due to the potential explosion risk, potential sources of ignition should be removed out of the working area. In addition, measures should be taken to prevent electrostatic discharges. Storage: Store the substance in the original containers in a dry, cool and well-ventilated place. Keep them tightly closed and secure them against falling by taking the appropriate measures. Avoid residues on the outside of the containers. Do not store in heat or direct sunlight. Keep away from food, drink and animal feeding stuffs. Apply the VCI concept for the Mixed Storage of Chemicals. Packaging of the substance and or preparation: Drums, 200 L.
Transport information
Land transport (ADR/RID)
- UN number:
- 3265
- Proper shipping name and description:
- CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
(2,5-DIMETHYL PHENYL ACETYL CHLORIDE) - Chemical name:
- 2,5-Dimethylphenylacetyl chloride
- Class:
- 8
- Classification code:
- C3
- Packaging group:
- II
- Labels:
- 8
SpecialProvisionsopen allclose all
Inland waterway transport (ADN(R))
- UN number:
- 3265
- Proper shipping name and description:
- CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
(2,5-DIMETHYL PHENYL ACETYL CHLORIDE) - Chemical name:
- 2,5-Dimethylphenylacetyl chloride2,5-Dimethylphenylacetyl chloride
- Class:
- 8
- Classification code:
- C3
- Packaging group:
- II
- Labels:
- 8
Remarksopen allclose all
Marine transport (IMDG)
- UN number:
- 3265
- Proper shipping name and description:
- CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
(2,5-DIMETHYL PHENYL ACETYL CHLORIDE) - Chemical name:
- 2,5-Dimethylphenylacetyl chloride
- Class:
- 8
- Packaging group:
- II
- EmS code:
- F-A, S-B
- Labels:
- 8
Remarksopen allclose all
Air transport ICAO/IATA
- UN number:
- 3265
- Proper shipping name and description:
- CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
(2,5-DIMETHYL PHENYL ACETYL CHLORIDE) - Chemical name:
- 2,5-Dimethylphenylacetyl chloride
- Class:
- 8
- Packaging group:
- II
- Labels:
- 8
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
This substance is handled under Strictly Controlled Conditions in accordance with REACH regulation Article 17(3) for on-site isolated intermediates and, in case the substance is transported to other sites for further processing, the substance should be handled at these sites under the Strictly Controlled Conditions as specified in REACH regulation Article 18(4). Site documentation to support safe handling arrangements including the selection of engineering, administrative and personal protective equipment controls in accordance with risk-based management systems is available at each manufacturing site.
Respiratory protection: Full mask (multi-range ABEK/P2)
Hands protection Rubber gloves
Eyes protection Safety goggles
Skin protection Working protection
Respiratory protection: Full mask (multi-range ABEK/P2)
Hands protection Rubber gloves
Eyes protection Safety goggles
Skin protection Working protection
Stability and reactivity
Danger other than fire: None known.
Chemical reaction with water: Organic acid chlorides react with water under the formation
of hydrochlorid acid.
Dust explosion: Not applicable.
Dust explosion determined by test: N
Chemical reaction with water: Organic acid chlorides react with water under the formation
of hydrochlorid acid.
Dust explosion: Not applicable.
Dust explosion determined by test: N
Disposal considerations
Industry - Possibility of recovery/recycling: The substance will be used as an intermediate in the
chemical industry and can not be recycled.
Industry - Possibility of neutralisation: None known.
Industry - Possibility of destruction: controlled discharge: Incineration.
Industry - Possibility of destruction - incineration: Industrial incinerator with gas scubber.
Industry - Possibility of destruction - water purification: Treatment in an industrial sewage water treatment plant.
Industry - Possibility of destruction - other: None.
Public at large - Possibility of recovery/recycling: Not applicable, industrial intermediate only.
chemical industry and can not be recycled.
Industry - Possibility of neutralisation: None known.
Industry - Possibility of destruction: controlled discharge: Incineration.
Industry - Possibility of destruction - incineration: Industrial incinerator with gas scubber.
Industry - Possibility of destruction - water purification: Treatment in an industrial sewage water treatment plant.
Industry - Possibility of destruction - other: None.
Public at large - Possibility of recovery/recycling: Not applicable, industrial intermediate only.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
Route: .live1