Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 927-807-9 | CAS number: -
Surface tension
Administrative data
Link to relevant study record(s)
- Endpoint:
- surface tension
- Type of information:
- read-across from supporting substance (structural analogue or surrogate)
- Adequacy of study:
- key study
- Study period:
- 2010
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- other: Acceptable, well-documented study report which meets basic scientific principles. No GLP lab.
- Justification for type of information:
- A discussion and report on the read across strategy is given as an attachment in IUCLID Section 13.
- Reason / purpose for cross-reference:
- read-across: supporting information
- Qualifier:
- according to guideline
- Guideline:
- other: Wilhelmy Plate method
- Principles of method if other than guideline:
- Wilhelmy plate method is used to measure the surface tension using a standardized plate with a ring/plate tensiometer. The plate is moved towards the surface until the meniscus connects with it. The surface tension is calculated from the resulting force. Due to uncertain wetting behavior, the plate can only be used for interfaces under certain limitations.
- GLP compliance:
- no
- Remarks:
- No GLP certified lab
- Type of method:
- plate method
- Key result
- Surface tension:
- 24.3 mN/m
- Temp.:
- 25 °C
- Conc.:
- 100 vol%
- Conclusions:
- The measured surface tension at 25°C is 24.3 mN/m.
- Executive summary:
The measured surface tension at 25°C is 24.3 mN/m.
Reference
Description of key information
There is no data available for Hydrocarbons, C9-C11, n-alkanes, >2% aromatics. However, data is available for structural analogue, Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, < 2% aromatics and presented in the dossier. This data is read across to based on analogue read across and a discussion and report on the read across strategy is provided as an attachment in IUCLID Section 13.
The surface tension of Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, < 2% aromatics at 25°C is between 22 and 27 mN/m.
Key value for chemical safety assessment
Additional information
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
