Copper, [29H,31H-phthalocyaninato(2-)-N29,N30,N31,N32]-, sulfonated

Guidance on Safe Use

First-aid measures

- Inhalation: Remove exposed person to fresh air if adverse effects are observed.

- Eye contact: Flush thoroughly with water. If irritation occurs, get medical assistance. Remove contact lenses, if present and easy to do. Continue rinsing.

- Skin Contact: Take off contaminated clothing and wash before re-use. Wash with soap and water. If skin irritation occurs, get medical attention.

- Ingestion: Rinse mouth. Get medical attention if symptoms occur.

- Indication of any immediate medical attention and special treatment needed, Hazards: No data available; Treatment: Treat symptomatically.

Fire-fighting measures

- General Fire Hazards: No unusual fire or explosion hazards noted.

- Suitable extinguishing media: Use water spray, dry chemical or foam for extinction. CO2 may be ineffective on large fires.

- Unsuitable extinguishing media: Not determined.

-  Special fire fighting procedures: Solid does not readily release flammable vapors.

- Special protective equipment for fire-fighters: Wear full protective firegear including self-containing breathing apparatus operated in the positive pressure mode with full facepiece, coat, pants,

gloves and boots.

Accidental release measures

- Personal precautions, protective equipment and emergency procedures: Personal Protective Equipment must be worn, see PPE section.

- Environmental Precautions: Avoid release to the environment. Do not contaminate water sources or sewer. Environmental manager must be informed of all major spillages. Prevent further leakage or spillage if safe to do so.

- Methods and material for containment and cleaning up: Pick up free solid for recycle and/or disposal.

Handling and storage

- Precautions for safe handling: Observe good industrial hygiene practices. Provide adequate ventilation. Wear appropriate personal protective equipment.

Avoid conditions which create dust.

- Maximum Handling Temperature: Not determined.

- Conditions for safe storage, including any incompatibilities: Store away from incompatible materials.

- Maximum Storage Temperature: Not determined.

- Specific end use(s): End uses are listed in an attached exposure scenario when one is required.

Transport information

Land transport (UN RTDG/ADR/RID)

Shipping

Special provisions / remarks

Remarks:

Not regulated.

Inland waterway transport (UN RTDG/ADN(R))

Shipping

Special provisions / remarks

Remarks:

Not regulated.

Marine transport (UN RTDG/IMDG)

Shipping

Special provisions / remarks

Remarks:

Not regulated.

Air transport (UN RTDG/ICAO/IATA)

Shipping

Special provisions / remarks

Remarks:

Not regulated.

Additional transport information

Additional information

Special provisions / remarks / other:

For transportation, steps must be taken to prevent load shifting or materials falling, and all relating legal statutes should be obeyed. Review classification requirements before shipping materials at elevated temperatures.
Shipping descriptions may vary based on mode of transport, quantities, temperature of the material, package size, and/or origin and destination It is the responsibility of the transporting organization to follow all applicable laws, regulations and rules relating to the transportation of the material. Review classification requirements before shipping materials at elevated temperatures.

Exposure controls / personal protection

1. Technical protection measures: Occupational Exposure Limits: None of the components have assigned exposure limits.

2. Organisational protection measures: Observe good industrial hygiene practices.

3. Hand protection: Suitable gloves can be recommended by the glove supplier.

4. Feet protection: Boots as necessary to minimize contact.

5. Body protection: Gloves, coveralls, apron, boots as necessary to minimize contact. Do not wear rings, watches or similar apparel that could entrap the material.

6. Eye protection: If contact is likely, safety glasses with side shields are recommended.

7. Respiratory protection: A respiratory protection program compliant with all applicable regulations must be followed whenever workplace conditions require the use of a respirator. Use respirator with a dust/mist cartridge if the recommended exposure limit is exceeded.

Stability and reactivity

- Reactivity: No data available.

- Chemical Stability: Material is stable under normal conditions.

- Possibility of Hazardous

- Reactions: Will not occur.

- Conditions to Avoid: None known.

- Incompatible Materials: Alkalies. Bases. Oxidizing agents.

- Hazardous Decomposition Products: Thermal decomposition or combustion may generate smoke, carbon monoxide, carbon dioxide , nitrogen oxides, sulfur oxides, mercaptans, sulfides, including hydrogen sulfide and other products of incomplete combustion. Thermal decompositon may generate copper oxides and other copper containing compounds.

Disposal considerations

- Disposal methods: Treatment, storage, transportation, and disposal must be in accordance with applicable Federal, State/Provincial, and Local regulations. Dispose of packaging or containers in accordance with local, regional, national and international regulations. Empty container contains product residue which may exhibit hazards of product.

- Contaminated Packaging: Container packaging may exhibit hazards.