Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 435-150-1 | CAS number: -
Guidance on Safe Use
Administrative data
First-aid measures
breathing is observed. Seek medical attention if symptoms
persist.
Emergency measure - Eyes: In case of contact with eyes, rinse affected area with
appropriate eye-wash for at least 15 minutes. Seek medical
advice.
Emergency measure - Skin: Wash affected area with soap and water; remove contaminated
clothing. Seek medical attention if irritation persists.
Emergency measure - Ingestion: Seek immediate medical attention.
Fire-fighting measures
Product arising from burning: The substance is combustible and will burn if involved in a
fire, evolving noxious fumes (eg carbon and platinum oxides
and chlorine containing compounds).
Product determined by test: N
Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.
Fight the fire from a safe distance or protected location.
Accidental release measures
Wear appropriate personal protective equipment as detailed
in section 2.3.10.
Absorb spillages of solutions with a suitable inert material
(eg. sand or soil). Carefully transfer the spillage to waste
containers, or use a sealed industrial vacuum machine.
Containers filled with waste material must be labelled in
the same way as the original substance containers.
Clean the spillage area with detergent and water. Retain
washings for precious metal recovery.
Dispose of waste material in accordance with local
regulations by metal reclamation.
Handling and storage
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid exposure.
Engineering controls are necessary to reduce exposure to the
substance.
When exposure cannot be prevented or adequately controlled
appropriate personal protective equipment should be worn.
Such protective equipment should conform to the appropriate
international or national standards as follows;
Chemical protective gloves to Standard EN374
Chemical protective clothing to Standard EN368
Eye protection to Standard EN166.
Furthermore, when respiratory protective equipment has to be
used, it must be capable of adequately controlling exposure,
be suitable for the purpose, and conform to the appropriate
international or national standards, such as a vapour mask
conforming to EN405 FFA1.
These measures should be regarded as a minimum.
Storage: Store in a dry well-ventilated area, under conditions of
darkness.
Keep containers tightly closed when not in use.
Packaging of the substance and or preparation: 1H1 UN Specification 200 litre drum.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Transport code: See below.
Transport: Provisionally classified as UN Class 3, PG III, UN number
1993.
Avoid crushing the containers. In the event of a spillage,
observe the warning labels on the container.
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Stability and reactivity
Chemical reaction with water: None reported.
Dust explosion: Not applicable to a liquid.
Dust explosion determined by test: N
Disposal considerations
will be kept to a minimum.
Discharge to the environment will be minimal. Recovery from
minor spillages or accidental discharge is not economically
or technically feasible, and such waste material will be
disposed of by precious metal recovery. In principle, it may
be possible to recover larger spillages of uncontaminated
material for subsequent use.
Industry - Possibility of neutralisation: None known.
Industry - Possibility of destruction: controlled discharge: Contaminated containers or spillages of solutions mixed with
inert material (eg. sand or soil) will be disposed of by
precious metal recovery at an authorised site in accordance
with local regulations.
Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes (eg. carbon and
platinum oxides and chlorine containing compounds) could be
formed.
Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly to
the sewage system or the aqueous environment. However,
adverse effects on sewage treatment systems would be
unlikely.
Public at large - Possibility of recovery/recycling: Not applicable. The substance is not made available to the
public domain.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
