Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 947-320-5 | CAS number: -
Flash point
Administrative data
Link to relevant study record(s)
- Endpoint:
- flash point, other
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 08 April 2016
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.9 (Flash-Point)
- Version / remarks:
- 2008
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Type of method:
- closed cup
- Flash point apparatus:
- other: MINIFLASH FLP
- Key result
- Remarks on result:
- no flash point according to standard method
- Remarks:
- up to 200 °C
- Interpretation of results:
- other: Not classified in accordance with EU Criteria.
- Conclusions:
- Under the conditions of this study, no flash point was observed up to 200 °C.
- Executive summary:
The flash point of the test material was investigated in accordance with the standardised guideline EU Method A.9, under GLP conditions.
The test was performed by the help of MINIFLASH automatic flash point tester with the continuously closed cup – electric arc method according to ASTM D 6450.
The preliminary test was performed from 30 to 200 °C with heating rate 5.5 °C/min. The test material was measured with two parallel tests.
Under the conditions of this study, no flash point was observed up to 200 °C.
Reference
Results
- Preliminary test was performed from 30 to 200 °C with heating rate 5.5 °C/min. The test material was measured with two parallel tests. The parameters used for the flash point determinations are presented in Table 1.
- The measured flash point of the test material was: No flash point was observed up to 200 °C.
Description of key information
Under the conditions of this study, no flash point was observed up to 200 °C.
Key value for chemical safety assessment
Additional information
The flash point of the test material was investigated in accordance with the standardised guideline EU Method A.9, under GLP conditions. The study was awarded a reliability score of 1 in accordance with the criteria set forth by Klimisch et al. (1997).
The test was performed by the help of MINIFLASH automatic flash point tester with the continuously closed cup – electric arc method according to ASTM D 6450.
The preliminary test was performed from 30 to 200 °C with heating rate 5.5 °C/min. The test material was measured with two parallel tests.
Under the conditions of this study, no flash point was observed up to 200 °C.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
