Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 938-351-5 | CAS number: -
Guidance on Safe Use
Administrative data
First-aid measures
Pay attention to self-protection.
Remove victims from hazardous area.
Keep warm, position comfortably, and cover well.
Do not leave affected persons unattended.
First aid inhalation:
Move victims into fresh air.
If the casualty is not breathing: Perform mouth-to-mouth
resuscitation, notify emergency physician immediately.
First aid skin:
Wash off affected area immediately with plenty of water.
Continue decontamination with polyethylene glycol 400 after initial
rinsing with water and then wash with water and soap.
If symptoms persist, consult a physician for treatment.
First aid eye:
With eye held open, thoroughly rinse immediately with plenty of water
for at least 10 minutes.
Consult an ophthalmologist immediately if the symptoms persist.
First aid ingestion:
Rinse out mouth.
Immediately give large quantities of water to drink.
Consult a physician immediately.
Hints for physican: treatment
After accidental absorption in the body, the pathology and clinical
findings are dependent on the kinetics of the noxious substance
(quantity of absorbed substance, the absorption time, and the
effectiveness of early elimination measures (first aid)/ excretion -
metabolism).
Continue with first aid measures.
Depending on the pathology and clinical findings, patient monitoring
and symptomatic treatment are necessary.
Fire-fighting measures
Hazards during fire-fighting:
Hazardous fumes in fires, specific to the product:
isocyanate-containing vapours
Carbon monoxide
carbon dioxide (CO2)
Under certain fire conditions, traces of other toxic products may occur.
Closed container may rupture if strongly heated.
Cool closed containers exposed to fire with water spray.
Accidental release measures
Use personal protective equipment.
Ensure adequate ventilation.
Do not breathe vapours or spray mist.
Environmental Precautions:
Do not flush into surface water or sanitary sewer system.
Methods for cleaning or taking up:
Take up mechanically or with an absorbent material.
Fill into marked, sealable containers.
sand
diatomaceous earth
universal absorbent
sawdust
Handling and storage
Application, processing: Provide good ventilation or extraction.
Do not breathe vapours or spray mist.
Avoid contact with skin and eyes.
Fire and explosion protection:
Normal measures for preventive fire protection.
Storage requirements:
Keep container tightly closed.
Protect from moisture.
see also section 10.
Separate storage (general):
Observe prohibition against storing together!
Storage stability:
< 50 °C
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- Not dangerous according to transport regulations.
Shippingopen allclose all
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- Not dangerous according to transport regulations.
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- Not dangerous according to transport regulations.
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- Not dangerous according to transport regulations.
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Advice on system design: Provide for good ventilation if vapours/aerosols are formed.
Respiratory Protection:
In case of dusts/vapours/aerosols being formed or if the limit values like TLV are exceeded: use respiratory equipment with suitable filter (combined filter A2-P2) or wear a self contained respiratory apparatus.
Hand protection:
Additional Protection The following details refer to information provided by Kächele-Cama Latex GmbH, Am Kreuzacker 9, D-36124 Eichenzell, www.kcl.de
Type of material Camatril (730)
Material thickness 0,6 mm
Breakthrough time 480 min
Eye protection: safety glasses
Industrial hygiene:
Do not inhale vapours / aerosols.
Avoid contact with skin and eyes.
Remove immediately all contaminated clothing.
Wash hands before breaks and at the end of workday.
Stability and reactivity
Decomposition products: Splitting agent: isophorone di-isocyanate.
Disposal considerations
causing emissions of harmful substances. No waste key number as per the European Waste Types List can be assigned to this product, since such classification is based on the (as yet undetermined) use to which the product is put by the consumer. The waste key number must be determined as
per the European Waste Types List (decision on EU Waste Types List 2000/532/EC) in cooperation with the disposal firm / producing firm / official
authority.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
