Registration Dossier

Administrative data

First-aid measures

General information: Remove injured from exposure. Remove contaminated clothing.
In case of hypersensitivity (anaphylactic) reactions must receive immediate
medical attention.
After inhalation: Remove to fresh air give artificial respiration or oxygen.
After skin contact: Flush effected area with plenty of water and soap.
After eye contact: Flush with plenty of water for at least 20 minutes, while eyelids are
wide opened with fingers. Get medical attention immediately.
After swallowing: Wash out the mouth with water, carry the victim to a physician.

Fire-fighting measures

Fire hazard class: Dust-air mixture: “B”-Fire and explosion hazard.
Packaged material: “C"-Fire hazard.
Fire and explosion hazard: Combustible material, its powder static chargeable.
The packaged material has no static danger.
Extinguishing media: Water spray, carbon dioxide, dry chemical powder or foam as
appropriate for surrounding fire and materials.
Protection in event of fire: Self-contained breathing equipment and protective clothing.
Dangerous combustion products:
CO, CO2, NOx, SOx és HCl

Accidental release measures

Personal precautions: Wear safety goggles or face shield to ensure eye protection.
Do not breath dust. Apply respiratory protection (full face with P3 type dust filter).
Environmental precautions: Keep out of water supplies and sewers.
Clean-up methods: Collect the material carefully and place into suitable labelled
container for disposal. Avoid raising dust. Wash and aerate spill site after material pickup is complete.
Wear protective equipment (dust mask, goggles, protective gloves and protective clothing).

Handling and storage

Handling: Avoid contact with eyes. The material is slightly irritant, but classification is not needed.
Avoid breathing the powder. In case of dust exposure (e.g.) sampling, use full face respiratory protection with P3 dust filter.
Safety measures: Combustible material, its powder is static chargeable.
During processing of the material if it forms dust, the formation of static electricity should be considered.
Grounding of equipments, and electrostatically conductible packing material is recommended.
The packaged material has no static danger.
Storage: Store at cool, dry and well-ventilated place in tightly closed containers.

Transport information

Land transport (ADR/RID)

UN number:
None. Not a dangerous good.
Not regulated by ADR/RID, IATA/DGR and IMDG.
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Engineering control measures:
Closed system in order to avoid exposure.
Protection against static electricity needed.
Grounding of equipments, and electrostatically conductible packing material is recommended.
General and local ventilation needed.
Safety eye wash and emergency shower needed.
Occupational exposure standards: Not registered.
General protection hygiene measures: Remove contaminated clothing. Wash before reuse.
Wash hands with soap and water thoroughly after handling.
In case of possibilty to exposure to workers apply personal protective equipments.
Respiratory protection: Dust filter (FFP3) or gas mask with P3 filter in case of exposure.
Hand protection: Protective gloves. (Rubber is suitable).
Eye protection: Chemical safety goggles or face shield.
Wear protective clothing.

Stability and reactivity

Stability: Stable at room temperature.
Materials to avoid: Organic, combustible substance. Avoid contact with strong bases, acids and oxidising materials.

Disposal considerations

Dispose the solid waste or incinerate in accordance of all federal and local regulations.
Recommended disposal procedure: incineration with afterburner and scrubber in an approved facility.