Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

General information:

-

After inhalation:

Provide fresh air. In cases of sickness seek medical advice (show label or SDS if possible).

After contact with the skin:

Wash with plenty of water or water and soap. Seek medical advice in case of continuous irritation. Remove contaminated or soaked clothing.

After contact with the eyes:

Rinse immediately with plenty of water. Seek medical advice in case of continuous irritation.

After swallowing:

Drink plenty of water in small portions and induce vomiting. In cases of sickness seek medical advice (show label if possible).

Fire-fighting measures

Suitable extinguishing media:

water spray, extinguishing powder, foam, carbon dioxide.

Extinguishing media which must not be used for safety reasons:

water jet .

Special exposure hazards arising from the substance or preparation itself, combustion products, resulting gases:

At low oxygen level: organic decomposition products.

Special protective equipment for fire fighting:

Use respiratory protection independent of recirculated air.

Accidental release measures

Personal precautions:

Wear personal protection equipment (see section 8). Avoid sources of ignition.

Environmental precautions:

Prevent material from entering sewers or surface waters. Contain any fluid that runs out using suitable material (e.g. earth).

Observe local/state/federal regulations.

Methods for cleaning up:

Absorb with a liquid binding material such as diatomaceous earth and dispose of according to local/state/federal regulations.

Contain larger amounts and pump up into suitable containers.

Handling and storage

Handling:

Precautions for safe handling:

Do not mix with alkalis, strong acids, oxidizing agents.

Precautions against fire and explosion:

No special precautions against fire and explosion required.

Storage:

Conditions for storage rooms and vessels:

Protect against light.

Advice for storage of incompatible materials:

Do not store together with oxidizing agents like peroxides etc.

Further information for storage:

Keep in the original container in a cool well ventilated place. Keep container dry and tightly closed.

Minimum temperature allowed during storage and transportation: 10 °C

Maximum temperature allowed during storage and transportation: 40 °C

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Not regulated for transport
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
Not regulated for transport
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
Not regulated for transport
Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
Not regulated for transport
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure limits:

Maximum airborne concentrations at the workplace:

not applicable

-

Exposure limited and controlled:

Exposure in the work place limited and controlled:

General protection and hygiene measures:

Observe standard industrial hygiene practices for the handling of chemical substances. Avoid contact with eyes and skin.

Personal protection equipment:

Respiratory protection:

not required .

Hand protection:

Protective gloves made of butyl rubber . Wear gloves for short periods only < 10 mins.

Eye protection:

tight fitting protective goggles .

Skin protection:

protective clothing, protective goggles/face protection

Exposure to the environment limited and controlled:

Prevent material from entering surface waters and soil.

Stability and reactivity

General information:

If stored and handled in accordance with standard industrial practices no hazardous reactions are known.

Conditions to avoid:

Possibility of spontaneous polymerization of unstabilized product by ambient temperature. Ensure adequate stabilisation.

Materials to avoid:

Reacts with: basic substances and peroxides. Reaction causes the formation of: heat. Possibility of polymerisation.

Hazardous decomposition products:

If stored and handled in accordance with standard industrial practices and local regulations where applicable: none known.

By hydrolysis: acetaldehyde .

Disposal considerations

Material:

Recommendation:

Dispose of according to regulations by incineration in a special waste incinerator. Observe local/state/federal regulations.

Uncleaned packaging:

Recommendation:

Completely discharge containers (no tear drops, no powder rest, scraped carefully). Containers may be recycled or re-used.

Observe local/state/federal regulations. Uncleaned packaging should be treated with the same precautions as the material.