Di-sec-butylphenol

Guidance on Safe Use

Handling and storage

Handling

Organics can obtain an electrostatic charge during processing activities including: storage, mixing, filtering, or pumping which may represent a spark hazardand, therefore, a fire hazard. Also, a sudden release of such materials from storage or process equipment particularly at elevated temperatures, and/or pressures, can result in ignitions from static absent any apparent ignition source. Flashpoint and autoignition values obtained from standard test conditions may not be applicable to other situations and, thus, the safe use of this material in any process should be reviewed by one familiar with both the storage, processing conditions and this material. Note: materials thar are static accumulators may have such high potential diferences created that such a situation may result in a discharge as sparks capable of causing ignition of organic vapors. Such discharges can occur from insulated conductors (plant items, drums), bulk liquids, mists and insulating plastic materials. As with all chemicals, good industrial hygiene practices should be followed when handling this material. When the container(s) is empty it may retain product residue including vapors which could accumulate. Therefore, do not cut, drill, grind, or weld empty containers. Additionally, do not conduct such activity(ies) near full, partially full, or empty product containers without appropriate workplace safety authorization(s) or permit(s).

Storage

Protect container from physical abuse. Keep the container tightly closed. Keep this material in a cool, well-ventilated place. Store in an area which is resistant to the potential corrosion this material can cause. Keep separate from incompatibles. Bond and ground containers when transferring material. Do not handle or store near an open flame, heat or other sources of ignition. Do not cut, weld, solder, drill, grind, or expose containers to heat, flame, sparks, or other sources of ignition. Empty product containers may contain product residue. Do not reuse empty containers.

Transport information

Shipping

SpecialProvisions

Shipping

Remarks

Marine transport (UN RTDG/IMDG)

Shipping

Remarks

Shipping

Remarks

SpecialProvisions

Exposure controls / personal protection

Engineering controls

Ventilation should be sufficient to effectively remove, and prevent buildup of, nay vapors, dusts, or fumes that may be generated during handling or thermal processing. In order to ensure appropriate electrical safety practices are followed, consult applicable standards. These may include guidelines such as the National Fire Protection Association (NFPA) 70, "The National Electrical Code" and NFPA 499, "Recommended Practice for the Classification of Combustible Dusts and of Hazardous (Classified) Locations for Electrical Installations in Chemical Process Areas". NOTE: since this material's vapors, dust or fumes can form explosive mixtures in air, ensure that any potential areas where explosions may occur are designed to minimize potential damage. For recommendations to prevent such explosions and associated damage, consult applicable guidelines such as National Fire Protection Association (NFPA) 69, "Standard on Explosion Prevention Systems" and/or NFPA 68, "Guide for Venting Deflagrations".

Personal protective equipment

Eye/face protection

Wear safety glasses with side shields; chemical goggles (if splashing possible). Wear a face shield if a splash hazard exists. Select & use eye protection per a competent health & safety professional using: OSHA (29 CFR 1910.133) or Europe's (EN166).

Skin protection

Use appropriate hand protection. Wear impervious gloves for prolonged contact.

Respiratory protection

Maintain material's vapors, fumes, or particulate levels below any levels of concern including, for solids, considering the material as a particulate not otherwise classified (nuisance dust) @ 10 mg/m3. Select & use respirators per a competent health & safety professional using: OSHA (29 CFR 1910.134); ANSI (Z88.2-1992); or Europe's (EN 149).