Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 230-049-5 | CAS number: 6925-69-5
Endpoint summary
Administrative data
Description of key information
Appearance:
On the basis of physical observation and using the sense of smell,12H-phthaloperin-12-onewas observed to be a orange solid powder.
Melting point:
The melting point determination of Test item 12H-phthaloperin-12-one (CAS No. 6925-69-5 ) was done as per the test guideline OECD 102. The method followed was according to Capillary/metal block. The Mean Melting Temperature Range was determine to be 202 -205.6°C at 968.1 hPa.
Boiling Point:
The boiling point determination of Test item 12H-phthaloperin-12-one (CAS No. 6925-69-5 ) was done as per the test guideline OECD 103. The method followed was according to Siwoloboff. The boiling point was determine to be greater than 300 °C at 966.8 hPa.
Density:
The density of Test item 12H-phthaloperin-12-one (CAS No. 6925 -69-5 ) was determined following OECD guideline 109 and according to OECD guideline 109 and according to the method adapted from ASTM D 854-02. The mean density of the test item was determine to be 1.2534 g/cm³ at 20°C and 967.5 hPa.
Particle size distribution:
The particle size distribution of test item 12H-phthaloperin-12-one (CAS No. 6925-69-5 ) was determined by granulometric analysis with rotap sieve shaker. The particle size distribution was determine to be in 150 micron .
Vapour pressure:
The estimated vapour pressure of 12H-phthaloperin-12-one (CAS No. 6925-69-5 ) at 25 deg C was 4.55E-07 Pa.
Partition coefficient:
The Log Pow value of the test chemical was determined to be 3.966 ± 0.000 dimensionless at 25°C.
Water solubility:
The water solubility determination of test item 12H-phthaloperin-12-one (CAS No. 6925-69-5) was done as per the OECD guideline 105 by spectrophotometric analytical method as per OECD 101. The solubility of (12H-phthaloperin-12-one of CAS No: 6925-69-5 )in water was determine to be 0.11895 mg/L at 25°C.
Thus the chemical is considered to be slightly soluble in water.
Surface tension:
The study does not need to be conducted because water solubility is below 1 mg/L at 20°C.
Flash point:
The study does not need to be conducted because the flash point is only relevant to liquids and low melting point solids.
Auto flammability:
12H-phthaloperin-12-one did not catch fire on being exposed to air at room temperature of 27°C pressure of 966 hPa. This indicates that 12H-phthaloperin-12-one is not auto-flammable.
Flammability:
12H-phthaloperin-12-one does not indicate any ignition when the flame of bunsen burner having temperature of approximately 950°C is brought in contact with it. Thus it can be concluded that 12H-phthaloperin-12-one is not flammable at high temperature. However since such high temperatures are not found under normal circumstances of transportation and use, thus 12H-phthaloperin-12-one was considered non-flammable.
Explosiveness:
The study does not need to be conducted because there are no chemical groups present in the molecule which are associated with explosive properties.
Oxidizing properties:
The study does not need to be conducted because the substance is a solid.
Stability in organic solvents and identity of relevant degradation products:
The study does not need to be conducted because the stability of the substance is not considered to be critical.
pH:
The pH determination of test item 12H-phthaloperin-12-one (CAS No. 6925-69-5 ) was done as per the test guideline OECD 122. The mean pH of the test dispersion was determined with the help of digital pH meter. The mean pH was determine to be 4.69 at 26.8 °C.
Dissociation constant:
The study does not need to be conducted because the substance has no ionic structure.
Viscosity:
The study does not need to be conducted because the substance is a solid.
Additional information
Appearance:
On the basis of physical observation and using the sense of smell,12H-phthaloperin-12-onewas observed to be a orange solid powder.
Melting point:
The melting point determination of Test item 12H-phthaloperin-12-one (CAS No. 6925-69-5 ) was done as per the test guideline OECD 102. The method followed was according to Capillary/metal block. The Mean Melting Temperature Range was determine to be 202 -205.6°C at 968.1 hPa.
Boiling Point:
The boiling point determination of Test item 12H-phthaloperin-12-one (CAS No. 6925-69-5 ) was done as per the test guideline OECD 103. The method followed was according to Siwoloboff. The boiling point was determine to be greater than 300 °C at 966.8 hPa.
Density:
The density of Test item 12H-phthaloperin-12-one (CAS No. 6925 -69-5 ) was determined following OECD guideline 109 and according to OECD guideline 109 and according to the method adapted from ASTM D 854-02. The mean density of the test item was determine to be 1.2534 g/cm³ at 20°C and 967.5 hPa.
Particle size distribution:
The particle size distribution of test item 12H-phthaloperin-12-one (CAS No. 6925-69-5 ) was determined by granulometric analysis with rotap sieve shaker. The particle size distribution was determine to be in 150 micron .
Vapour pressure:
Modified Grain method was used to estimate the vapour pressure of 12H-phthaloperin-12-one (CAS No. 6925-69-5 ) using MPBPVP v1.43 of EPI SUITE.
The estimated vapour pressure of 12H-phthaloperin-12-one (CAS No. 6925-69-5 ) at 25 deg C was 4.55E-07 Pa.
Partition coefficient:
The partition Coefficient n-octanol/water of test chemical was determined by the Reverse Phase High Performance Liquid Chromatographic method according to OECD Guideline No. 117 for testing of Chemicals. A test item solution was prepared by accurately weighing 4 mg of test item and diluted with Acetonitrile up to 10 ml. Thus, the test solution concentration was 400 mg/l. The pH of test substance was 5.1. The reference substances were chosen according to functional similarity with the test substance and calibration graph was prepared. The reference substances were 4-Acetylpyridine, Benzene, Toluene, Ethylbenzene, Naphthalene, Biphenyl, having Pow value ranging from 0.5 to 4.
The Log Pow value of the test chemical was determined to be 3.966 ± 0.000 dimensionless at 25°C.
Water solubility:
The water solubility determination of test item 12H-phthaloperin-12-one (CAS No. 6925-69-5) was done as per the OECD guideline 105 by spectrophotometric analytical method as per OECD 101. The solubility of (12H-phthaloperin-12-one of CAS No: 6925-69-5 )in water was determine to be 0.11895 mg/L at 25°C.
Thus the chemical is considered to be slightly soluble in water.
Surface tension:
The study does not need to be conducted because water solubility is below 1 mg/L at 20°C.
Flash point:
The study does not need to be conducted because the flash point is only relevant to liquids and low melting point solids.
Auto flammability:
12H-phthaloperin-12-one did not catch fire on being exposed to air at room temperature of 27°C pressure of 966 hPa. This indicates that 12H-phthaloperin-12-one is not auto-flammable.
Flammability:
12H-phthaloperin-12-one does not indicate any ignition when the flame of bunsen burner having temperature of approximately 950°C is brought in contact with it. Thus it can be concluded that 12H-phthaloperin-12-one is not flammable at high temperature. However since such high temperatures are not found under normal circumstances of transportation and use, thus 12H-phthaloperin-12-one was considered non-flammable.
Explosiveness:
The study does not need to be conducted because there are no chemical groups present in the molecule which are associated with explosive properties.
Oxidizing properties:
The study does not need to be conducted because the substance is a solid.
Stability in organic solvents and identity of relevant degradation products:
The study does not need to be conducted because the stability of the substance is not considered to be critical.
pH:
The pH determination of test item 12H-phthaloperin-12-one (CAS No. 6925-69-5 ) was done as per the test guideline OECD 122. The mean pH of the test dispersion was determined with the help of digital pH meter. The mean pH was determine to be 4.69 at 26.8 °C.
Dissociation constant:
The study does not need to be conducted because the substance has no ionic structure.
Viscosity:
The study does not need to be conducted because the substance is a solid.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
