Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

If inhaled Move to fresh air. Call a physician if symptoms develop or persist.
If on skin Wash off with soap and water. Get medical attention if irritation develops and persists.
If in eyes Rinse with water. Get medical attention if irritation develops and persists.
If swallowed Rinse mouth. Get medical attention if symptoms occur.
Most important symptoms/effects, acute and delayed: Direct contact with eyes may cause temporary irritation.
Protection of first-aid responders: Ensure that medical personnel are aware of the material(s) involved, and take precautions to protect themselves.
Notes to physician Treat: symptomatically.

Fire-fighting measures

Extinguishing media:Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2).
Extinguishing media to avoid :Do not use water jet as an extinguisher, as this will spread the fire.
Specific hazards : During fire, gases hazardous to health may be formed.
Special fire fighting procedures: Use water spray to cool unopened containers
Protection of fire-fighters:Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
General fire hazards:No unusual fire or explosion hazards noted.
Specific methods:Use standard firefighting procedures and consider the hazards of other involved materials.

Accidental release measures

Personal precautions, protective equipment and emergency measures:Keep unnecessary personnel away. For personal protection, see section 8 of the SDS.
Environmental precautions:Avoid discharge into drains, water courses or onto the ground.
Methods or materials for containment and cleaning up:This product is miscible in water. Stop the flow of material, if this is without risk. Dike far ahead of spill for later disposal. Following product recovery, flush area with water.

Handling and storage

Handling Technical measures (e.g. Local and generalventilation): No specific recommendations.
Safe handling advice: Observe good industrial hygiene practices.
Contact avoidance measures: Strong oxidizing agents. For further information, please refer to section 10 of the SDS.
Hygiene measures :Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants.

Safe storage conditions: Store in original tightly closed container. Store away from incompatible materials.
Safe packaging materials: Keep in original container

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Occupational exposure limits: No exposure limits noted for ingredient(s).
Engineering measures: Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level.

Personal protective equipment
Respiratory protection: In case of insufficient ventilation, wear suitable respiratory equipment.
Hand protection: Wear appropriate chemical resistant gloves.
Eye protection: Wear safety glasses with side shields (or goggles).
Skin and body protection: Wear suitable protective clothing.

Stability and reactivity

Reactivity :The product is stable and non-reactive under normal conditions of use, storage and transport.
Chemical stability: Material is stable under normal conditions.
Possibility of hazardous reactions: No dangerous reaction known under conditions of normal use.
Conditions to avoid: Contact with incompatible materials.
Incompatible materials: Strong oxidizing agents.
Hazardous decomposition products: No hazardous decomposition products are known.

Disposal considerations

Dispose in accordance with all applicable regulations.
Residual waste: Dispose of in accordance with local regulations. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe manner (see: Disposal instructions).
Contaminated packaging : Empty containers should be taken to an approved waste handling site for recycling or disposal. Since emptied containers may retain product residue, follow label warnings even after container is emptied.
Local disposal regulations: Contract with a disposal operator licensed by the Law on Disposal and Cleaning. When your own wastewater treatment plant is not available, collect entire waste and then charge to a licensed industrial waste management professional with manifests for industrial waste.