Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove to fresh air. Symptomatic treatment.

Emergency measure - Eyes: Rinse thoroughly with water for at least 15 minutes.

Symptomatic treatment.

Emergency measure - Skin: Wash affected areas with soap and water. Symptomatic

treatment.

Emergency measure - Ingestion: Seek medical attention.

Fire-fighting measures

Recommended extinguishing agent: Water spray, carbon dioxide, dry powder or foam.

Product arising from burning: The substance is combustible and will burn if involved in a

fire, evolving noxious fumes (eg carbon and nitrogen).

Product determined by test: N

Protective equipment: Full protective clothing and self-contained breathing

apparatus must be worn.

Fight the fire from a safe distance or protected location.

Accidental release measures

Emergency measures in case of spillage: Evacuate personnel from immediate vicinity, and remove all

sources of ignition.

Wear protective clothing as detailed in Section 2.3.10

Avoid dust formation by damping down with water. Absorb

spillages of solutions with a suitable inert material (eg.

sand or soil). Carefully transfer the spillage to waste

containers, or use a sealed industrial vacuum machine.

Containers filled with waste material must be labelled in

the same way as the original substance containers.

Clean the spillage area with detergent and water.

Dispose of waste material in accordance with local

regulations by incineration.

Handling and storage

Handling: The substance should be stored, handled and used in

conditions of good industrial hygiene and in conformity with

any local regulations in order to avoid exposure.

Engineering controls are necessary to reduce exposure to the

substance.

When exposure cannot be prevented or adequately controlled

appropriate personal protective equipment should be worn.

Such protective equipment should conform to the appropriate

international or national standards as follows;

Chemical protective gloves to Standard EN374

Chemical resistant clothing to Standard EN368

Eye protection to Standard EN166

When necessary appropriate respiratory protection should be

used. e.g. a dust mask conforming to EN149 FFP1.

The standards mentioned above should be regarded as a

minimum.

Storage: Store in a cool dry place, away from strong oxidising agents

and sources of ignition.

Keep containers tightly closed when not in use.

Packaging of the substance and or preparation: 60 litre capacity sealed plastic "Mauser" kegs, or cardboard

kegs.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

Shippingopen allclose all
Special provisions / remarks
Remarks:
Transport code: None.
Transport: Avoid crushing the containers. In the event of a spillage,
observe the warning labels on the container.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None known

Chemical reaction with water: None known to be hazardous

Dust explosion: There is a potential dust explosion hazard from this organic

powder.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Discharge to the environment will be zero. Recovery from

minor spillages or accidental discharge is not economically

or technically feasible, and such waste material will be

disposed of by incineration. In principle, it may be

possible to recover larger spillages of uncontaminated

material for subsequent use.

Industry - Possibility of neutralisation: The notification tests have shown that the substance is a

skin sensitiser and is dangerous for the environment. There

is also cause for concern over potential mutagenicity on the

basis of a positive Ames test result observed with metabolic

activation. .

No chemical treatment is practicable to neutralise the

hazardous health properties.

The dust hazard will be minimised by appropriate handling

and storage.

No chemical treatment is practicable to neutralise the

hazardous environmental properties.

Industry - Possibility of destruction: controlled discharge: Contaminated containers or spillages of solutions mixed with

inert material (eg. sand or soil) may be disposed of by

landfill at an authorised tip in accordance with local

regulations.

Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning

under controlled conditions at a licensed waste treatment

processor in accordance with local regulations. Stack gases

must be scrubbed, because noxious fumes (eg. carbon and

nitrogen oxides) could be formed.

Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly to

the sewage system or the aqueous environment. However, it is

predicted that adverse effects on sewage treatment systems

would be unlikely.

Public at large - Possibility of recovery/recycling: The substance will not enter the public domain.