Registration Dossier

Administrative data

First-aid measures

4.1 Description of first aid measures
In case of inhalation
- Quickly move the person away from the contaminated area. Make the affected person rest.
- Immediate medical attention is required.
- Show this sheet to the doctor.
- Be aware to maintain life support if necessary.
In case of skin contact
- Wash off immediately with plenty of water for at least 15 minutes.
- Use appropriate protective equipment when treating a contaminated person.
- Immediate medical attention is required.
- Show this sheet to the doctor.
- Be aware to maintain life support if necessary.
In case of eye contact
- Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
- Keep eye wide open while rinsing.
- Show this sheet to the doctor.
- Always obtain medical advice, even if there are no symptoms.
- Be aware to maintain life support if necessary.
In case of ingestion
- Do NOT induce vomiting.
- Immediate medical attention is required.
- Show this sheet to the doctor.
- Do not give anything to drink.
- Be aware to maintain life support if necessary.

Fire-fighting measures

Suitable extinguishing media
- Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Unsuitable extinguishing media
- Water may be ineffective.
5.2 Special hazards arising from the substance or mixture
- Under fire conditions:
- Will burn
- On combustion, toxic gases are released.
5.3 Advice for firefighters
Special protective equipment for firefighters
- In the event of fire, wear self-contained breathing apparatus.
- Personal protective equipment comprising: suitable protective gloves, safety goggles and protective clothing
- For further information refer to section 8 "Exposure controls/personal protection".
Specific fire fighting methods
- Cool containers/tanks with water spray.
- Do not use a solid water stream as it may scatter and spread fire.

Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures
- Where exposure level is not known, wear approved, positive pressure, self-contained respirator.
- Where exposure level is known, wear approved respirator suitable for level of exposure.
- In addition to the protective clothing/equipment in Section 8, wear a two piece PVC suit with hood or PVC overalls
with hood.
6.2 Environmental precautions
- Stop the leak. Turn leaking containers leak-side up to prevent the escape of liquid.
- Contain the spilled material by bunding.
- Do not let product enter drains.
- Do not allow uncontrolled discharge of product into the environment.

Handling and storage

Precautions for safe handling
- Keep away from heat and sources of ignition.
- Keep away from flames and sparks.
- Use only with adequate ventilation/personal protection.
- Provide good ventilation of working area (local exhaust ventilation if necessary).
- Containers must be bonded and grounded when pouring or transferring material.
- This material contains a flammable or combustible liquid and vapor.
- Do not release to water.

Transport information

Land transport (ADR/RID)

UN number:
2928
Shippingopen allclose all
Class:
6.1
Packaging group:
II
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control measures
Engineering measures
- Provide appropriate exhaust ventilation at places where dust is formed.
- Apply technical measures to comply with the occupational exposure limits.
Individual protection measures
Respiratory protection
- Self-contained breathing apparatus in confined spaces/insufficient oxygen/in case of large uncontrolled emissions/in
all circumstances when the mask and cartridge do not give adequate protection.
- Use only respiratory protection that conforms to international/ national standards.
- Respirator with a full face mask
- P3 filter
Hand protection
- Take note of the information given by the producer concerning permeability and break through times, and of special
workplace conditions (mechanical strain, duration of contact).
- Impervious gloves
Eye protection
- Dust proof goggles, if dusty.
- Tightly fitting safety goggles
- Eye wash bottles or eye wash stations in compliance with applicable standards.
Skin and body protection
- Full protective suit
- Change working clothes after each workshift.
- Contaminated work clothing should not be allowed out of the workplace.

Stability and reactivity

CHEMICAL STABILITY
Stability: Stable
Conditions To Avoid: Avoid contact with oxidizing agents, bases or amines

Disposal considerations

The Company encourages the recycle, recovery and reuse of materials, where permitted. If disposal is necessary,
The Company recommends that organic materials, especially when classified as hazardous waste, be disposed of by
thermal treatment or incineration at approved facilities. All local and national regulations should be followed