Registration Dossier

Administrative data

First-aid measures

If inhaled : If breathed in, move person into fresh air.
Artificial respiration and/or oxygen may be necessary.
Call a physician immediately.
Victim to lie down in the recovery position, cover and keep him warm.
In case of skin contact: Remove all contaminated clothing under the shower.
Wash off with plenty of water.
Call a physician immediately.
Keep warm and in a quiet place.
Wash contaminated clothing before re-use.
In case of eye contact: Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
Remove contact lenses.
Call a physician immediately.
If swallowed:If swallowed, rinse mouth with water (only if the person is conscious).
Call a physician immediately.
Do NOT induce vomiting.
Drink plenty of water.

Fire-fighting measures

5.1 Extinguishing media
Suitable extinguishing media : Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Water mist
Dry powder
Foam
Carbon dioxide (CO2)
Sand
Aqueous film forming foam (AFFF).
Unsuitable extinguishing media : Water spray jet

5.2 Special hazards arising from the substance or mixture
Hazardous combustion products : Carbon oxides
Chlorine compounds
Nitrogen oxides (NOx)
5.3 Advice for firefighters
Special protective equipment for firefighters: In the event of fire, wear self-contained breathing apparatus. Firefighters must wear fire resistant personal protective equipment.
Further information: In the event of fire, cool tanks with water spray.
Avoid dust formation.

Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures
Personal precautions: Evacuate personnel to safe areas.
disposable one-piece overall with integral hood
Avoid breathing dust.
Avoid dust formation.

6.2 Environmental precautions
Environmental precautions : Should not be released into the environment.
Do not flush into surface water or sanitary sewer system.

6.3 Methods and material for containment and cleaning up
Methods for cleaning up :Large spills: Sweep up or vacuum with HEPA filter or via wet cleaning into suitable containers for disposal.
Pick up and arrange without creating dust. Keep in properly labelled containers.
Small spills: Moisten a towel, cover the spill, pick up the spill or use HEPA vacuum.
Large spills + Small spills: Keep in suitable, closed containers for disposal. Treat recovered material as described in the section "Disposal considerations".

Handling and storage

7.1 Precautions for safe handling
Advice on safe handling : Ensure all equipment is electrically grounded before beginning transfer operations.
Avoid creating dust.
To avoid thermal decomposition, do not overheat.
Keep away from heat and sources of ignition.
Use personal protective equipment as required.
Advice on protection against fire and explosion: Avoid dust formation.
Hygiene measures: Handle in accordance with good industrial hygiene and safety practice.
7.2 Conditions for safe storage, including any incompatibilities
Requirements for storage areas and containers: To maintain product quality, do not store in heat or direct sunlight. Store in original container. Keep containers tightly closed in a cool, well-ventilated place. Store at room temperature.
Recommended storage temperature: 15 - 25 °C
7.3 Specific end use(s)
Specific use(s): Consult the technical guidelines for the use of this substance/mixture.

Transport information

Land transport (ADR/RID)

UN number:
UN 3261
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
UN 3261
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
UN 3261
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
UN 3261
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Engineering measures
Engineering controls should be used as the primary means to control possible exposures. Use process enclosures, local exhaust ventilation or other engineering controls to keep exposure levels below recommended exposure limits.
All personal protective equipment should be based on a risk assessment. Consult a Environment Health Safety expert if necessary.
Personal protective equipment
Eye protection:Face-shield
Hand protection Material:Neoprene
Long sleeve gloves Take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact).
Skin and body protection: closed work clothing
disposable one-piece overall with integral hood
Boots
Respiratory protection : Engineering controls should always be the primary method of controlling exposures.
If respiratory protective equipment is needed for certain activities, the type as well as the corresponding protection factor will depend upon the risk assessment and air concentrations, hazards, physical and warning properties of substances present.
Use only respiratory protection that conforms to international/ national standards.
Suitable mask with particle filter P3
Protective measures: The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.


Stability and reactivity

10.1 Reactivity
None reasonably foreseeable.
10.2 Chemical stability
Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
Hazardous reactions : Risk of dust explosion.
10.4 Conditions to avoid
Conditions to avoid : To avoid thermal decomposition, do not overheat.
Heat, flames and sparks.
10.5 Incompatible materials
Materials to avoid : Strong oxidizing agents
10.6 Hazardous decomposition products
Carbon oxides, Nitrogen oxides (NOx), Chlorocarbons

Disposal considerations

Product : Must be incinerated in a suitable incineration plant holding a permit delivered by the competent authorities.
In accordance with National, Federal, State and Local regulations.

Contaminated packaging : Empty containers should be taken to an approved waste handling site for recycling or disposal.