Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 700-890-7 | CAS number: 503614-91-3
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://echa.europa.eu/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_guidance-on-safe-use.png)
Guidance on Safe Use
Administrative data
First-aid measures
Eye Contact: Rinse immediately with plenty of water for at least 15 mins. Keep eye wide open while rinsing. Obtain medical attention.
Skin Contact: TAke off contaminated clothing and shoes immediately. Wash off immediately with plenty of water for at least 15 mins. If skin irritationpersists, call a physician.
Inhalation: Move to fresh air.Oxygen or artificial respiration if needed. Obtain medical attention.
Ingestion: Obtain medical attention. Do NOT induce vomitting. Never give anything by mouth to an unconcious person.
Notes to physician: Material not fully tested. Pregnant or nursing women should avoid exposure
Medical Surveillance: Employees who are pregnant, breast feeding or concerned about other reproductive issues should be encouraged to an occupational health physician.
Fire-fighting measures
Extinguising Media: Dry chemical, Water spray, Foam. Do NOT use water spray.
Protection of Fire Fighters:
PPE: In case of fire wear SCBA
Hazardous Combustion Products: Carbon Oxides (COx), Nitrogen Oxides (NOx)
Other Information: Decontaminate protective clothing and equipment before reuse. Avoid generating dust. Fine dust dispersed in air dispersed in air in sufficient concentrations and in the presence of an ignition source is a potential dust explosion hazard.
Accidental release measures
Use PPE. Examples include tightly fitting safety goggles, lab coat and impervious gloves. Wear respiratory protection. Depending on the nature of the spill (quantity and extent of spill), additional protective clothing and equipment such as SCBA may be needed.
Prevent release to drains and waterways. Prevent release to the environment.
Wet down any dust to prevent generation of aerosols if appropriate. Cover with suitable material.
Contain and collect spillage and place in container for disposal according to local regulations. Use a HEPA vacuum or moisten materials to minimise dust generation during clean up. Clean area with detergent and water after spill clean up, if appropriate. Handle waste materials, including gloves, protective clothing, contaminated spill clean up material etc..as appropriate for chemically and pharmacologically similar materials.
Dust deposits should not be allowed to accumulate on surfaces as these may form an explosive mixture if they are released into the atmosphere in sufficient concentrations. Non sparking tools should be used.
Handling and storage
Avoid exposure, obtain special instructions before use. Avoid formation of dust and aerosols. Keep away from heat and sources of ignition. Prevent release to drains and waterways. Minimise dust accumulation and generation. Routine housekeeping should be instituted to ensure that dusts do not accumulate on surfaces. Dry powders can accumulate static electric charges when subjected to the friction of transfer and mixing operations. Provide adequate precautions, such as electrical grounding or bonding or inert atmospheres. Nitrogen inerting required for all large scale opertions with this compound.
Store in sturdy containers appropriate to maintain the integrity of this compound for its intended use. Provide anti-static bags wehre drum liners are used.
Store at room temperature. Protect agains light. Keep away from heat, sparks and flames. Keep in a dry cool and well ventilated place.
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- This material is not a dangerous good for the purposes of transportation
Shippingopen allclose all
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- This material is not a dangerous good for the purposes of transportation
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- This material is not a dangerous good for the purposes of transportation
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- This material is not a dangerous good for the purposes of transportation
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Material is assigned to BMS exposure exposure control band 3 (range 10-100 ug/m3)
Use process enclosures, containemnt technology or other engineering controls to keep airbourne levels below recommended exposure limits.
When handling quantities up to 15 milligrams, a standard laboratory with general laboratory dilution ventilation (6-12 air changes per hour) is appropriate.
When handling quantities from 15 milligrams up to 1 kilogram, work in a standard laboratory using a fume hood, biological safety cabinet (Class II all types) or approved ventilated enclosure.
Quantities exceeding 1 kilograms should be handled in a dedicated laboratory. A laminar flow/powder containment booth is recommended for handling > 1 kg of active substance.
For manufacturing and pilot plant operations, use direct coupling and closed transfer systems for all bulk transfers. USe dust tight valves as appropriate. HEPA filtration of local exhaust ventilation (LEV) is required. IT is recommended that all dust handlign systems, such as local exhaust ventilation and powder transfer systems involved in teh handling of this product contact explosion relief venting, or an explosion suppression system or an oxygen deficient environemnt. Ensure that dust handling systems (Such as exhaust ducts, dust collectors, vessels and processing equipment) are designed in a manner to prevent escape of dust into the work area (i.e. there is no leakage from the equipment). Use only appropriatelclassified electrical equipment and powered industrial trucks.
RPE:
Eye Protection:
Hand Protection:
Skin and Body Protection
Hygiene
Environmental exposure controls.
Stability and reactivity
Stable under normal conditions
Disposal considerations
Disposal should be in accordance with applicable regional, national and local laws and reglations.
Disposal by incineration is recomnmended
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)