Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 947-850-7 | CAS number: -
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Uses at industrial sites
Documentsopen allclose all
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Textile Coating (Inclusion in Matrix)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- Textile Coating (Inclusion in Matrix) - Roller application etc. : Polymer preparations
- Process category (PROC):
- PROC 10: Roller application or brushing
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- use for leather finishing (No Inclusion in Matrix)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- use for leather finishing (No Inclusion in Matrix) - use of processing aids in finishing formulations: roller application or brushing on crust
- Process category (PROC):
- PROC 10: Roller application or brushing
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Textile application: dipping and pouring (Inclusion in Matrix)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- Textile application: dipping and pouring (Inclusion in Matrix) - Treatment of articles by dipping and pouring: non-processing aids
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Intermediate use
- Environmental release category (ERC):
- ERC6a: Use of intermediate
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Intermediate use - Use in closed process, no likelihood of exposure
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Intermediate use - Use in closed batch process (synthesis or formulation)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Intermediate use - Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Intermediate use - Use as laboratory reagent
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- textile application: calendering
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- textile application: calendering - Calendering operations: non processing agents
- Process category (PROC):
- PROC 6: Calendering operations
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Intermediate
- Environmental release category (ERC):
- ERC6a: Use of intermediate
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Intermediate
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Intermediate
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Intermediate
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Intermediate
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Intermediate
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Intermediate
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Intermediate
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Intermediate
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- lubrication
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- lubrication - lubrication during warp knitting or weaving
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Textile Coating (Reactive Processing Aids)
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- Textile Coating (Reactive Processing Aids) - Roller application etc. : reactive processing aids
- Process category (PROC):
- PROC 10: Roller application or brushing
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Textile application: dipping and pouring (Reactive Processing Aids)
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- Textile application: dipping and pouring (Reactive Processing Aids) - Treatment of articles by dipping and pouring: reactive processing aids
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- use in wet end (Reactive)
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- use in wet end (Reactive) - use of reactive processing aids in wet end: bring them into contact with hides
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial uses; Metal surface treatment products
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Industrial uses; Metal surface treatment products - Transfer and dilution of concentrated product by using dedicated dosing system; medium RMM
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Industrial uses; Metal surface treatment products - Brushing; Automated task; medium RMM
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Industrial uses; Metal surface treatment products - Industrial uses; Treatment of articles by dipping or pouring; medium RMM
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Industrial uses; Metal surface treatment products - Low energy manipulation and handling of substances bound in/on materials or articles
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial uses; Washing, cleaning and disinfecting products
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Industrial uses; Washing, cleaning and disinfecting products - Industrial uses; Use in a closed process
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Industrial uses; Washing, cleaning and disinfecting products - Industrial uses; Use in a closed process
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Industrial uses; Washing, cleaning and disinfecting products - Industrial uses; Automated task; Semi-automated task; Dedicated equipment; no RMM
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Industrial uses; Washing, cleaning and disinfecting products - Industrial uses; Automated task; Semi-automated task; Dedicated equipment; medium RMM
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Industrial uses; Washing, cleaning and disinfecting products - Transfer and dilution of concentrated product by using dedicated dosing system; medium RMM
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Industrial uses; Washing, cleaning and disinfecting products - Transfer and dilution of concentrated product by using dedicated dosing system; no RMM
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Industrial uses; Washing, cleaning and disinfecting products - Brushing; Automated task; medium RMM
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Industrial uses; Washing, cleaning and disinfecting products - Brushing; Automated task; no RMM
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Industrial uses; Washing, cleaning and disinfecting products - Industrial uses; Treatment of articles by dipping or pouring; with LEV
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Industrial uses; Washing, cleaning and disinfecting products - Industrial uses; Treatment of articles by dipping or pouring; high RMM
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Industrial uses; Washing, cleaning and disinfecting products - Industrial uses; Treatment of articles by dipping or pouring; medium RMM
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Industrial uses; Washing, cleaning and disinfecting products - Industrial uses; Treatment of articles by dipping or pouring; no RMM
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- use for leather finishing (Inclusion in Matrix)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- use for leather finishing (Inclusion in Matrix) - use of (non reactive) finishing products: roller application or brushing on crust
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- use for leather finishing (Inclusion in Matrix) - use of (non reactive) finishing products: dipping and pouring
- Process category (PROC):
- PROC 10: Roller application or brushing
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- manipulation of substances bound in materials
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- manipulation of substances bound in materials - mechanical processes resulting of release of substances
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- General Rubber Goods (industrial)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Name of activity / technique:
- General Rubber Goods (industrial)
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- General Rubber Goods (industrial) - Mixing in closed mixing unit (i.e. Banbury mixer); Open mill mixing; Steering mill dispersing
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- General Rubber Goods (industrial) - Grinding in jars or other grinding machines. Ingredients added manually or automatically. Dispersion poured into containers
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- General Rubber Goods (industrial) - Filling silos or temporary bins (typically outdoors)
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- General Rubber Goods (industrial) - Automatic substance metering in closed feeding system, injection into mixing chamber
Liquids Ex silane, oils - Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- General Rubber Goods (industrial) - Filling tanks (indoors or outdoors) - For liquids
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- General Rubber Goods (industrial) - Automatic substance metering , feeding into mixing unit
Solids Ex. CB, Si - Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- General Rubber Goods (industrial) - Intermediate compound storage
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- General Rubber Goods (industrial) - Compound transfer into a vessel, mixing and transfering cement into portable drums; Transferring cement into portable drums
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- General Rubber Goods (industrial) - Transferring substances into small containers
Solids (typically indoors); Storage in closed, dust sealed cargo bins
Big bag (typically indoors) - Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- General Rubber Goods (industrial) - Storage and packaging transfer into tanks and drums Liquids (typically indoors)
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- General Rubber Goods (industrial) - Weighting substances by hand or automatically in a dose bin. Example : small container at balance containing plastic bags
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- General Rubber Goods (industrial) - Manual metering, weighting possible, mainly synthetic rubbers and mixtures; Evacuation of the warm compound, treatment of the rubber sheet using antitack bath (water-based) and drying with cooling fans
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- General Rubber Goods (industrial) - Drying and/or solvents evaporation
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- General Rubber Goods (industrial) - Cement and paint application
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- General Rubber Goods (industrial) - Cement application
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- General Rubber Goods (industrial) - Rubber latex and water dispersed ingredients deposit into a thin layer by coagulation
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- General Rubber Goods (industrial) - Compound processing; Cooling extruded compound; Feeding from stock, milling, and feeding the calendar
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- General Rubber Goods (industrial) - Vulcanization, evacuation of cured article and fumes, cooling (for continuous processes)
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- General Rubber Goods (industrial) - Compound assembling from stocks
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Handling (Non-Reactive Processing Aids)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling (Non-Reactive Processing Aids) - transfer of processing aids into drums / vessels/transfer of processing aids into small containers
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Handling (Non-Reactive Processing Aids) - transfer of processing aids from/to vessels at non-dedicated facilities / Transfer of processing aids into small containers
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Handling (Non-Reactive Processing Aids) - transfer of processing aids from/to vessels at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Handling (Non-Reactive Processing Aids) - transfer of processing aids into drums / vessels/transfer of processing aids into small containers
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Handling (Non-Reactive Processing Aids) - transfer of processing aids from/to vessels at non-dedicated facilities / Transfer of processing aids into small containers
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Handling (Non-Reactive Processing Aids) - transfer of processing aids into drums / vessels/transfer of processing aids into small containers
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Handling (Non-Reactive Processing Aids) - transfer of processing aids from/to vessels at non-dedicated facilities / Transfer of processing aids into small containers
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- handling (Reactive Processing Aids)
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- handling (Reactive Processing Aids) - transfer of reactive processing aids into drums / vessels
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- handling (Reactive Processing Aids) - transfer of reactive processing aids from/to vessels at non-dedicated facilities
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- handling (Reactive Processing Aids) - transfer of reactive processing aids into drums / vessels
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- handling (Reactive Processing Aids) - transfer of reactive processing aids from/to vessels at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- handling (Reactive Processing Aids) - transfer of reactive processing aids into drums / vessels
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- handling (Reactive Processing Aids) - transfer of reactive processing aids from/to vessels at non-dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- use for leather finishing (Monomers)
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- use for leather finishing (Monomers) - use of reactive finishing products: roller application or brushing on crust / use of reactive finishing products: dipping and pouring
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- use for leather finishing (Monomers) - use of reactive finishing products: roller application or brushing on crust / use of reactive finishing products: dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- Tyres (industrial)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Name of activity / technique:
- Tyres (industrial)
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Tyres (industrial) - Mixing in closed mixing unit (i.e. Banbury mixer); Open mill mixing (tipical for laboratory scale)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Tyres (industrial) - Filling silos or temporary bins (typically outdoors)
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Tyres (industrial) - Filling tanks (indoors or outdoors) - For liquids; Automatic substance metering in closed feeding system, injection into mixing chamber
Liquids Ex silane, oils - Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Tyres (industrial) - Filling tanks (indoors or outdoors) - For liquids
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Tyres (industrial) - Automatic substance metering , feeding into mixing unit
Solids Ex. CB, Si - Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Tyres (industrial) - Compound transfer into a vessel, mixing and transfering cement into portable drums; Transferring cement into portable drums
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Tyres (industrial) - Transferring substances into small containers
Solids (typically indoors); Storage in closed, dust sealed cargo bins
Big bag (typically indoors); Storage and packaging transfer into tanks and drums
Liquids (typically indoors) - Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Tyres (industrial) - Weighting substances by hand or automatically in a dose bin. Example : small container at balance containing plastic bags
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Tyres (industrial) - Manual metering, weighting possible, mainly synthetic rubbers and mixtures
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Tyres (industrial) - Evacuation of the warm compound, treatment of the rubber sheet using antitack bath (water-based) and drying with cooling fans; Intermediate compound storage
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Tyres (industrial) - Cement and paint application; Treatment with lubricant. Lubrifiant, improve flox during mechanical treatmen
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Tyres (industrial) - Painting, cement application and tyre treatment with lubricants
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Tyres (industrial) - Compound processing; Cooling extruded compound; Feeding from stock, milling, and feeding the calendar
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Tyres (industrial) - Vulcanization, evacuation of cured article and fumes, cooling (for continuous processes)
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Tyres (industrial) - Skived cavities are filled with extruded rubber; Vulcanisation of green cushion layer or green tyre and evacuation of cured article and fumes
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Tyres (industrial) - Direct extrusion on the prepared casings of cushion gum layer
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Tyres (industrial) - Compound assembling from stocks
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Tyres (industrial) - Balance grinding and trimming
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Tyres (industrial) - Casings are selected and cleaned
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Tyres (industrial) - Part of rubber and rusted cords are removed from casing.
Casing cleaning. - Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Tyres (industrial) - Manual application of precured tread; Cutting, trimming, regrooving, abrading
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Textile Coating (Non-Reactive Processing Aids)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- Textile Coating (Non-Reactive Processing Aids) - Roller application etc. : processing aids
- Process category (PROC):
- PROC 10: Roller application or brushing
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Coating
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- Coating - application of permanent coating agents during foaming
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- application of non processing aids
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- application of non processing aids - application of spin finishes by various technologies e.g. lick rollers or nozzles in fiber lines; process temperature high/application of spin finishes by various technologies e.g. dipping or pouring; process temperature low/application of spin finishes by spraying
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- application of non processing aids - application of spin finishes by various technologies e.g. lick rollers or nozzles in fiber lines; process temperature high/application of spin finishes by various technologies e.g. dipping or pouring; process temperature low/application of spin finishes by spraying
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- use in wet end (No Inclusion in Matrix)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- use in wet end (No Inclusion in Matrix) - use of processing aids in wet end: bring them into contact with hides
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- extrusion (Inclusion in Matrix)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- extrusion (Inclusion in Matrix) - Production of preparations/articles by extrusion etc. : non processing non reactive agents
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- handling (Inclusion in Matrix)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- handling (Inclusion in Matrix) - transfer of non processing aids into drums / vessels / transfer of non processing aids into small containers
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- handling (Inclusion in Matrix) - transfer of non-processing aids from/to vessels at non-dedicated facilities/transfer of non processing aids from/to vessels at dedicated facilities/Transfer of non-processing aids into small containers
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- handling (Inclusion in Matrix) - transfer of non processing aids from/to vessels at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- handling (Inclusion in Matrix) - transfer of non processing aids into drums / vessels / transfer of non processing aids into small containers
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- handling (Inclusion in Matrix) - transfer of non-processing aids from/to vessels at non-dedicated facilities/transfer of non processing aids from/to vessels at dedicated facilities/Transfer of non-processing aids into small containers
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- handling (Inclusion in Matrix) - transfer of non processing aids into drums / vessels / transfer of non processing aids into small containers
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- handling (Inclusion in Matrix) - transfer of non-processing aids from/to vessels at non-dedicated facilities/transfer of non processing aids from/to vessels at dedicated facilities/Transfer of non-processing aids into small containers
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- extrusion (Reactive)
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- extrusion (Reactive) - Production of preparations/articles by extrusion etc. : cross linkers and curing agents
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Mixing
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- Mixing - formulation of recipe: foam
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Textile application: dipping and pouring (Non-Reactive Processing Aids)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- Textile application: dipping and pouring (Non-Reactive Processing Aids) - Treatment of articles by dipping and pouring: processing aids
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- use in wet end (Inclusion in Matrix)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- use in wet end (Inclusion in Matrix) - use of non processing/exhausting aids in wet end: bring them into contact with hides
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- application of processing aids
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- application of processing aids - application of spin finishes by various technologies e.g. lick rollers or nozzles in fiber lines; process temperature high/application of spin finishes by various technologies e.g. dipping or pouring; process temperature low/application of spin finishes
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- application of processing aids - application of spin finishes by various technologies e.g. lick rollers or nozzles in fiber lines; process temperature high/application of spin finishes by various technologies e.g. dipping or pouring; process temperature low/application of spin finishes
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Subsequent service life relevant for this use:
- no
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.