Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 248-962-2 | CAS number: 28319-77-9
Flammability
Administrative data
Link to relevant study record(s)
- Endpoint:
- flammable solids
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2018-05-03
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.10 (Flammability (Solids))
- GLP compliance:
- yes
- Key result
- Test procedure:
- burning rate test: preliminary screening test
- Moisture (wt %):
- 0.31
- Remarks on result:
- other: The test item is not highly flammable according to the criteria in Council Regulation (EC) No 440/2008, test method A.10.
- Interpretation of results:
- GHS criteria not met
- Conclusions:
- The test item is not highly flammable according to the criteria in Council Regulation (EC) No 440/2008, test method A.10.
Reference
The test was performed as follows:
The test item was loosely filled into the metal form (mould). The mould was then dropped three
times from a height of 2 cm onto a solid surface. The lateral limitations were removed and the
excess substance was scraped off. The plate was placed on top of the mould, the apparatus
was inverted and the mould was removed.
The pile was placed crossways to the air stream in the fume cupboard. The air stream was not
changed during the performance of the test. Around the testing device a wind protection shield
was positioned. Then the attempt was made to ignite the pile at one end.
The flame for the ignition was a natural gas burner flame with a diameter of 5 mm.
The test was performed using a clean, cool plate.
Description of key information
Key value for chemical safety assessment
- Flammability:
- not classified
Additional information
Justification for classification or non-classification
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
