Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 209-669-5 | CAS number: 590-01-2
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Specific investigations: other studies
Administrative data
- Endpoint:
- specific investigations: other studies
- Remarks:
- Acute inhalation RD50
- Type of information:
- experimental study
- Adequacy of study:
- supporting study
- Study period:
- 2008-2009
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- test procedure in accordance with national standard methods with acceptable restrictions
- Remarks:
- The experimental design is based on the procedures outlined in the Standard Test Method for Estimating Sensory Irritancy of Airborne Chemicals (ASTM designation: E 981-04) but differed in the type of exposure and plethysmography equipment used.
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 009
- Report date:
- 2009
Materials and methods
- Principles of method if other than guideline:
- This study is not designed to fulfill the requirements of any specific guideline. It is, however, based on the ASTM E 981-04: Standard Test Method for Estimating Sensory Irritancy of Airborne Chemicals (ASTM, 2004).
- GLP compliance:
- yes
- Type of method:
- in vivo
- Endpoint addressed:
- other: sensory irritation
Test material
- Reference substance name:
- Butyl propionate
- EC Number:
- 209-669-5
- EC Name:
- Butyl propionate
- Cas Number:
- 590-01-2
- Molecular formula:
- C7H14O2
- IUPAC Name:
- butyl propanoate
- Details on test material:
- Test Material Name: n-Butyl Propionate
Supplier, City, State (Lot, Reference Number): Chemical Marketing Concepts, New Milford, Connecticut (lot # WB18551G01)
Constituent 1
- Specific details on test material used for the study:
- Test Material Name: n-Butyl Propionate
Chemical Name: Butyl ester propanoic acid
Synonyms: Butoxypropionic acid, Butyl propionate
Supplier, City, State (Lot, Reference Number): Chemical Marketing Concepts, New Milford, Connecticut (lot # WB18551G01)
Purity/Characterization (Method of Analysis and Reference): Non-GLP characterization lists the purity of the test material as 99.92% with 0.01% water. The test material was not GLP-characterized.
Test animals
- Species:
- mouse
- Strain:
- Swiss Webster
- Sex:
- male
- Details on test animals or test system and environmental conditions:
- Species and Sex: Mice (male)
Strain and Justification: Swiss Webster (CFW) mice. Selection of this strain and species was based on a variety of considerations including hardiness, low incidence of respiratory disease, and large preexisting database of RD50 determinations using this mouse strain. The Swiss Webster mouse is identified as the rodent of choice in ASTM Method E981-04. Although any mouse of the proper size could be used, marked differences in irritant sensitivity have been observed between different strains and sexes (ASTM, 2004).
Supplier and Location: Charles River Laboratories Inc. (Portage, Michigan)
Age at Study Start: Animals were approximately five weeks at arrival and approximately 6-7 weeks at the time of exposure.
Physical and Acclimation: Each animal was evaluated by a laboratory veterinarian, or a trained animal/toxicology technician under the direct supervision of a laboratory veterinarian, to determine the general health status and acceptability for study purposes upon arrival at the laboratory (fully accredited by the Association for Assessment and Accreditation of Laboratory Animal Care International - AAALAC International). The animals were housed two-three per cage in stainless steel cages, in rooms designed to maintain adequate environmental conditions (temperature, humidity, and photocycle), and acclimated to the laboratory for at least one week prior to the start of the study.
Mice were acclimated to the restrained whole body plethysmograph chambers for a half hour and one hour, two and one days prior to exposure, respectively.
Housing:
After assignment, animals were housed one per cage in stainless steel cages. Cages had wire mesh floors and were suspended above absorbent paper. Cages contained a hanging feeder and a pressure activated lixit valve-type watering system.
Temperature: 22 ± 1°C
Humidity: 40-70%
Air Changes: 12-15 times/hour
Photoperiod: 12-hour light/dark (on at 6:00 a.m. and off at 6:00 p.m.)
Randomization and Identification:
Before administration of test material began, animals were stratified by body weight and then randomly assigned to treatment groups using a computer program designed to increase the probability of uniform group mean weights and standard deviations at the start of the study. Animals placed on study were uniquely identified via subcutaneously implanted transponders (BioMedic Data Systems, Seaford, Delaware) that were correlated to unique alphanumeric identification numbers.
Feed and Water:
Animals were provided LabDiet Certified Rodent Diet #5002 (PMI Nutrition International, St. Louis, Missouri) in pelleted form. Feed and municipal water was provided ad libitum except during exposure. Analyses of the feed were performed by PMI Nutrition International to confirm the diet provides adequate nutrition and to quantify the levels of selected contaminants. Drinking water obtained from the municipal water source was periodically analyzed for chemical parameters and biological contaminants by the municipal water department. In addition, specific analyses for chemical contaminants were conducted at periodic intervals by an independent testing facility. Copies of these analyses are maintained at Toxicology & Environmental Research and Consulting, The Dow Chemical Company, Midland, Michigan.
Animal Welfare:
In accordance with the U.S. Department of Agriculture animal welfare regulations, 9 CFR, Subchapter A, Parts 1-4, the animal care and use activities required for conduct of this study were reviewed and approved by the Institutional Animal Care and Use Committee (IACUC). The IACUC has determined that the proposed Activities were in full accordance with these Final Rules. The IACUC-approved Animal Care and Use Activities to be used for this study were Immuno 09 and Animal ID 01.
Administration / exposure
- Route of administration:
- inhalation: vapour
- Vehicle:
- air
- Details on exposure:
- Route, Method of Administration, Frequency, Duration and Justification:
Inhalation was selected as the route of administration since it is a potential route of human exposure.
Summary:
Separate groups of four mice were exposed to a range of n-butyl propionate vapor concentrations which produced responses (decreased respiration rate) ranging from no effect (≤ 12% decrease) to the maximum (≤ 85% decrease) that could be obtained with nbutyl propionate.
For each exposure concentration a group of 4 male Swiss Webster mice were placed into restrained whole-body plethysmograph (WBP) chambers supplied with filtered room air. Mice were allowed a ten-minute acclimation period before the exposure/monitoring cycle began. This acclimation period was necessary to reduce spurious noise in the restrained WBP pressure signal due to random movements of the mouse. After a ten-minute acclimation period the exposure/monitoring cycle was initiated and baseline respiratory rate data (breaths/minute) were collected for a ten minute period. Test material exposure was then initiated and mice were exposed for 30 minutes with continuous collection of respiratory rate data. In order to assure that a maximum response (at that exposure concentration) was obtained, a plateau of response for at least 1 minute was obtained. The minimum decrease in respiratory rate considered significant was 12% (of baseline), provided that it was sustained for 3 minutes or reproducible in 3 animals for at least 1 minute (ASTM, 2004). In no case was the decrease in respiratory rate allowed to exceed 80 to 85% of the baseline value regardless of irritant concentration or potency (ASTM, 2004).
Artifacts in pressure changes due to movements of animals within the plethysomgraph chamber were electronically eliminated from the data set by the software system utilized.
A ten minute recovery period was recorded after the end of exposure. At the end of the recovery period, recording was stopped and the animals were removed from the plethysmograph chambers and returned to their home cages with free access to feed and water. The mice were held for 7 days. Body weights and clinical observations were monitored to assess any untoward effects of exposure.
Exposure Chambers:
The restrained whole-body chambers are comprised of a reference and an animal chamber. Data are generated during normal respiration which creates a cyclic pressure increase/decrease in the animal chamber that is detected by a differential pressure transducer. Breathing frequency and volumes are measured using the timing and magnitude of the pressure changes in the animal chamber. Restrained whole-body plethysmography allows for continuous data collection on conscious animals, and multiple endpoints can be evaluated. Based on the 4 liter per minute flow rate, the theoretical equilibrium time to 99% (T99) of the target concentration was 0.2 minutes.
Generation System:
A Tedlar bag (SKC, Inc., Eighty Four, Pennsylvania) was filled with vaporized test material in air to serve as the stock gas bag used to generate the desired chamber concentration. Desired chamber concentrations were then generated using a sealed pump with a sampling line connected to the inlet valve of the stock gas bag. The pump delivered the test material at a set rate to the inlet of the mixing chamber, where the gas was mixed with the appropriate amount of dilution air. - Analytical verification of doses or concentrations:
- yes
- Details on analytical verification of doses or concentrations:
- Exposure Concentration:
Test atmosphere concentration of the mixing chamber was continuously monitored with a Miran 1A infrared (IR) spectrophotometer (Foxboro/Wilks, South Norwalk, Connecticut). The IR was calibrated and a standard curve compiled, prior to the start of the exposure with standards of test material in Tedlar sampling bags (SKC, Eighty Four, Pennsylvania) to cover the range of exposure concentrations to be tested. The analytical concentration during each exposure was interpolated from the standard curve. The IR was checked prior to each exposure with a standard of known concentration. The nominal concentration was calculated based on the amount of test material fed into the generation system and the total chamber airflow. - Duration of treatment / exposure:
- 30 minutes
- Frequency of treatment:
- Single 30 minute exposure
- Post exposure period:
- 7 days
Doses / concentrationsopen allclose all
- Dose / conc.:
- 250 ppm
- Dose / conc.:
- 417 ppm
- Dose / conc.:
- 607 ppm
- Dose / conc.:
- 679 ppm
- Dose / conc.:
- 732 ppm
- Dose / conc.:
- 970 ppm
- No. of animals per sex per dose:
- 4 males/dose group
- Control animals:
- no
Examinations
- Examinations:
- Animal Observations and Criteria of Response:
A cage-side examination was conducted at least once a day, preferably at approximately the same time each day (usually in the morning). This examination was typically performed with the animals in their cages and was designed to detect significant clinical abnormalities that were clearly visible upon a limited examination and to monitor the general health of the animals. The animals were not hand-held for these observations unless deemed necessary. Significant abnormalities that would be observed include, but were not limited to: decreased/increased activity, repetitive behavior, vocalization, incoordination/limping, injury, neuromuscular function (convulsion, fasciculation, tremor, twitches), altered respiration, blue/pale skin and mucous membranes, severe eye injury (rupture), alterations in fecal consistency, and fecal/urinary quantity. Moribund animals not expected to survive until the next observation period were humanely euthanized that day. In addition, all animals were observed for morbidity, mortality, and the availability of feed and water at least twice daily.
Clinical Examinations:
A hands-on evaluation of skin, fur, mucous membranes, respiration and nervous system function (including tremors, convulsions, diarrhea and animal behavior) was conducted during the pre-exposure period (prior to exposure on day 1), and on days 2, 4, and 7. On the day a clinical examination was conducted, the AM or PM cage-side examination may not have been conducted due to the more thorough nature of the clinical examination.
Body Weights:
All mice were weighed during the pre-exposure period (prior to exposure on day 1), and on days 2, 4, and 7.
Terminal Sacrifice:
On test day 7, all animals were anesthetized with carbon dioxide and euthanized. A gross necropsy was not performed and tissues were not saved.
Results and discussion
- Details on results:
- Chamber Concentration Data:
Actual average exposure concentrations were 250, 417, 607, 679, 732 and 970 ppm nbutyl propionate. Airflow through the exposure chamber was maintained at 4 liters per minute for each exposure.
Respiration Rate Data:
A concentration-dependent decrease in respiration rate was observed. The mean maximum decrease in respiratory rate for each of the exposure groups were as follows: 36% (250 ppm), 40% (417 ppm), 45% (607 ppm), 51% (679 ppm), 55% (732 ppm) and 61% (970 ppm).
Based on these data, the RD50 of inhaled n-butyl propionate was calculated to be 668 ppm, with a 95% confidence interval of 329-1007 ppm.
The respiratory rate of each animal was measured during the ten minute period immediately following the end of exposure in order to assess the reversibility of the exposure-dependent decrease in respiratory rate. The percent recovery relative to the maximum respiratory rate depression for that animal was calculated for all animals in each experimental group. The average percent recovery for all experimental groups was 66.9% with a range of 61.6% (679 ppm exposure group) to 83.3% (250 ppm exposure group).
Mortality:
All animals survived the exposure to the test material as well as the one-week postexposure period.
Clinical Observations:
In-life observations noted post-exposure were limited to decreased activity on test day 2 for one animal in the 417 ppm exposure group. This observation was resolved by the next observation on test day 4.
Body Weight:
With the exception of mice in the 250 ppm exposure group, which gained weight throughout the study, the mean bodyweights for all groups decreased approximately 2-5% from test day 1 to test day 2. Mean bodyweights for all exposure groups returned to or exceeded pre-exposure (test day 1) values by the end of the seven day observation period.
Applicant's summary and conclusion
- Conclusions:
- Based on these data, the RD50 of inhaled n-butyl propionate is 668 ppm (95% CI = 329- 1007) for male Swiss Webster mice.
- Executive summary:
This study was conducted to evaluate the sensory irritant potential of inhaled n-butyl propionate vapors in adult Swiss Webster (CFW) mice. The concentration of test material (n-butyl propionate) which resulted in a 50% depression in respiration rate (RD50) was determined according to procedures outlined in ASTM E 981-04 (Standard Test Method for Estimating Sensory Irritancy of Airborne Chemicals).
Groups of four male Swiss Webster (CFW) mice were exposed for thirty minutes to 250, 417, 607, 679, 732 or 970 ppm n-butyl propionate. Mice were allowed a ten-minute acclimation period before the exposure/monitoring cycle began. After the ten minute acclimation period the exposure/monitoring cycle was initiated and baseline respiratory rate data (breaths/minute) were collected for a ten-minute period. Test material exposure was then initiated and mice were exposed for 30 minutes with continuous collection of respiratory rate data. Respiratory rate during a ten-minute recovery period was recorded after the end of exposure.
The mice were held for seven days following exposure during which time body weights and clinical observations were monitored to assess any untoward effects of exposure. All animals survived the 30 minute exposure to the test material as well as the one-week post-exposure period. In-life observations noted post-exposure were limited to decreased activity on test day two for one animal in the 417 ppm exposure group. This observation was resolved by the next observation on test day four.
With the exception of the 250 ppm exposure group, which gained weight throughout the study, mean bodyweights for all groups decreased approximately 2-5% from test day one to test day two. Mean bodyweights for all exposure groups returned to or exceeded preexposure (test day one) values by the end of the seven-day observation period
A concentration-dependent decrease in respiration rate was observed. The mean maximum decrease in respiratory rate for each of the exposure groups were as follows: 250 ppm 36%, 417 ppm 40%, 607 ppm 45%, 679 ppm 51%, 732 ppm 55%, and 970 ppm 61%.
The average percent recovery during the ten minute period immediately following the end of exposure for all experimental groups was 67%, indicating that the treatment-induced respiratory depression was largely reversible.
Based on these data, the RD50 of inhaled n-butyl propionate is 668 ppm (95% CI = 329-1007) for male Swiss Webster mice.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.