Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 278-169-7 | CAS number: 75277-39-3
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Skin irritation / corrosion
Administrative data
- Endpoint:
- skin irritation: in vitro / ex vivo
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2016-06-29 to 2016-07-01
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 016
- Report date:
- 2016
Materials and methods
Test guidelineopen allclose all
- Qualifier:
- according to guideline
- Guideline:
- EU Method B.46 (In Vitro Skin Irritation: Reconstructed Human Epidermis Model Test)
- Version / remarks:
- 06 July 2012
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 439 (In Vitro Skin Irritation: Reconstructed Human Epidermis Test Method)
- Version / remarks:
- 28 July 2015
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
Test material
- Reference substance name:
- Sodium 4-(2-hydroxyethyl)piperazin-1-ylethanesulphonate
- EC Number:
- 278-169-7
- EC Name:
- Sodium 4-(2-hydroxyethyl)piperazin-1-ylethanesulphonate
- Cas Number:
- 75277-39-3
- Molecular formula:
- C8H18N2O4S.Na
- IUPAC Name:
- sodium 1-[4-(2-hydroxyethyl)piperazin-1-yl]ethanesulfonate
- Test material form:
- liquid
Constituent 1
In vitro test system
- Test system:
- human skin model
- Source species:
- human
- Cell type:
- non-transformed keratinocytes
- Cell source:
- other: adult donors, not further specified
- Justification for test system used:
- The EPISKIN model has been validated for irritation testing in an international trial. After a review of scientific reports and peer reviewed publications on the EPISKIN method, it showed evidence of being a reliable and relevant stand-alone test for predicting rabbit skin irritation, when the endpoint is evaluated by MTT reduction and for being used as a replacement for the Draize Skin Irritation test (OECD TG 404 and Method B.4 of Annex V to Directive 67/548/EEC) for the purposes of distinguishing between skin irritating and no- skin irritating test substances (STATEMENT OF VALIDITY OF IN-VITRO TESTS FOR SKIN IRRITATION; ECVAM; Institute for Health & Consumer Protection; Joint Research Centre; European Commission; Ispra; 27 April 2007).
- Vehicle:
- unchanged (no vehicle)
- Details on test system:
- RECONSTRUCTED HUMAN EPIDERMIS (RHE) TISSUE
- Model used: EpiSkinTM Small Model (EpiSkinTMSM) (manufactured by EPISKIN SNC Lyon, France)
- Tissue batch number: 16-EKIN-026
- Expiry date: 04 July 2016
- Certification and release date: 28 June 2016
- Date of initiation of testing: 29 June 2016
TEMPERATURE USED FOR TEST SYSTEM
- Temperature used during treatment / exposure: room temperature
- Temperature of post-treatment incubation: 37 °C
REMOVAL OF TEST MATERIAL AND CONTROLS
-Volume and number of washing steps: approximately 25 mL PBS 1x solution, 1 washing step
- Observable damage in the tissue due to washing: none
- Modifications to validated SOP: none
MTT DYE USED TO MEASURE TISSUE VIABILITY AFTER TREATMENT / EXPOSURE
- MTT concentration: 0.3 mg/mL
- Incubation time: 3 hours (± 5 min)
- Spectrophotometer: 96-well plate spectrophotometer
- Wavelength: 570 nm
- Filter: not specified
- Filter bandwidth: not specified
- Linear OD range of spectrophotometer: not specified
FUNCTIONAL MODEL CONDITIONS WITH REFERENCE TO HISTORICAL DATA
- Histology scoring: Historical control value: >= 19.5, 22.7 +/- 0.5 for batch used
- IC50: Historical control value: 1.5 mg/mL <= IC50 <= 3 mg/mL, 2.6 mg/mL for batch used
- Morphology: Well-differentiated epidermis consisting of a basal layer, several spinous and granular layers and a thick stratum corneum was satisfactory in the batch used.
- Contamination: Blood of donor: absence of HIV 1+2, hepatitis C antibodies and hepatitis B antigen HB; epidermal cells of donor: absence of bacteria, fungus and mycoplasma
NUMBER OF REPLICATE TISSUES:
3
CONTROL TISSUES USED IN CASE OF MTT DIRECT INTERFERENCE
The test material did not interact with the MTT, therefore additional controls and data calculations were not necessary.
NUMBER OF INDEPENDENT TEST SEQUENCES / EXPERIMENTS TO DERIVE FINAL PREDICTION:
1
PREDICTION MODEL / DECISION CRITERIA (choose relevant statement)
- The test substance is considered to be corrosive or irritating to skin if the viability after exposure is <= 50 %.
- The test substance is considered to be non-corrosive to skin if the viability after exposure is greater than 50 %. - Control samples:
- yes, concurrent negative control
- yes, concurrent positive control
- Amount/concentration applied:
- TEST MATERIAL
- Amount applied: 10 mg (to moistened skin)
NEGATIVE CONTROL
- Amount applied: 10 µL
POSITIVE CONTROL
- Amount applied: 10 µL
- Concentration: 5 % aq. - Duration of treatment / exposure:
- 15 minutes
- Duration of post-treatment incubation (if applicable):
- 42 hours
- Number of replicates:
- 3
Results and discussion
In vitro
Results
- Irritation / corrosion parameter:
- % tissue viability
- Run / experiment:
- 1
- Value:
- 104
- Vehicle controls validity:
- not applicable
- Negative controls validity:
- valid
- Remarks:
- 100
- Positive controls validity:
- valid
- Remarks:
- 18
- Other effects / acceptance of results:
- - OTHER EFFECTS:
- Visible damage on test system: none
- Direct-MTT reduction: No colour change was observed after three hours of incubation. The test material did not interact with the MTT, therefore additional controls and data calculations were not necessary. A false estimation of viability can be precluded.
- Colour interference with MTT: The test item showed no ability to become coloured in contact with water. The intrinsic colour of test item is white and therefore considered to be not able to significantly stain the tissues and lead false estimate of viability. Furthermore, the test item was completely removed from the epidermal surface at rinsing period. Additional controls and data calculations were not necessary. A false estimation of viability can be precluded.
DEMONSTRATION OF TECHNICAL PROFICIENCY:
Prior to routine use of the method the laboratory demonstrated the technical proficiency in a separate study using the ten Proficiency Chemicals according to OECD Test Guideline No. 439.
ACCEPTANCE OF RESULTS:
- Acceptance criteria met for negative control: yes, the mean OD value of the three negative control tissues was 0.762.
- Acceptance criteria met for positive control: yes, the mean OD value obtained for the positive control was 0.139 and this result corresponds to 18 % viability when compared to the results obtained from the negative control.
- Acceptance criteria met for variability between replicate measurements: Each calculated standard deviation value (SD) for the % viability was below 18.
Applicant's summary and conclusion
- Interpretation of results:
- GHS criteria not met
- Conclusions:
- The test item was determined to have no skin irritation potential.
- Executive summary:
EpiSkinTM SM test using the test item has been performed to predict its irritation potential by measurement of its cytotoxic effect, as reflected in the MTT assay, according to the OECD Test Guideline No. 439. Disks of EPISKIN (three units) were treated with test item and incubated for 15 minutes at room temperature. Exposure of test material was terminated by rinsing with PBS 1x solution. Epidermis units were then incubated at 37 °C for 42 hours in an incubator with 5 % CO2. The viability of each disk was assessed by incubating the tissues for 3 hours with MTT solution at 37 °C in 5 % CO2 protected from light. The precipitated formazan was then extracted using acidified isopropanol and quantified spectrophotometrically. SDS (5 % aq.) and 1×PBS treated (three units / positive and negative control) epidermis were used as positive and negative controls respectively. For each treated tissue viability was expressed as a percentage relative to negative control. In this in vitro skin irritation test using the EPISKIN model, the test item did not show significantly reduced cell viability in comparison to the negative control (mean value: 104 %). All obtained test item viability results were far above 50 % when compared to the viability values obtained from the negative control. Therefore the test item was considered to be non-irritant to skin. Positive and negative controls showed the expected cell viability values within acceptable limits. The experiment was considered to be valid.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.