Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

4.1 Description of first aid measures

General information
Remove from exposure. Remove contaminated clothing and shoes.
Consult a doctor if irritation develop or persist.

After inhalation
Remove to fresh air and monitor breathing. If breathing becoming difficult,
give oxygen and consult a physician. If breathing stops, give artificial
respiration and consult a physician.

After skin contact
Take off contaminated clothing immediately, wash the skin with plenty of
water and soap without any delay.
If irritation develop or persist seek medical advice.

After eye contact
Flush with plenty of water for at least 15 minutes.
Assure adequate flushing by separating the eyelids with fingers.
Consult a specialist for medical surveillance.
Immediately consult a physician.

After swallowing Wash out the mouth with clear water if the patient is conscious.
Consult with a physician.

4.2 Most important symptoms and effects, both acute and delayed
Not available.

4.3 Indication of any immediate medical attention and special treatment needed
Treat symptomatically and supportively.

Fire-fighting measures

5.1 Extinguishing media

5.1.1 Suitable extinguishing media:
Water spray, carbon dioxide, extinguishing powder, foam.

5.1.2 Unsuitable extinguishing media:
Unknown

5.2 Special hazards arising from the substance or mixture
CO, CO2, NOx, HCl

5.3 Advice for firefighters
When extinguishing fires, use breathing apparatus with an independent source of air.

5.3.1 Fire hazard class
Extremely flammable solid or danger of explosion

Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures
As a general rule, when handling avoid all contact and inhalation of dust, mists, and/or vapours associated with the material.

6.2 Environmental precautions
Hinder substance from entering soil, sewers or living water.

6.3 Methods and material for containment and cleaning up
Collect the product carefully and place material into suitable, labelled container for disposal. Avoid dispersion into air. Do not use synthethic clothing, avoid spark generation.
Ventilate the effected area and wash spill site after material pickup is complete. Don’t evacuate in the waste water system.
Wear protective equipment.

Handling and storage

7.1 Precautions for safe handling

Handling
As a general rule, avoid all contact and inhalation of dust, mists and/or vapours associated with the material.

Safety measures
Suitable general and local exhaust ventillation is needed.
Combustible material. Static chargeable.
During processing of the material if it forms dust, the formation of static electricity should be considered.

Fire and explosion protection measures
Take measures against electrostatic discharges.

7.2 Conditions for safe storage, including any incompatibilities
Storage temperature: 15-30°C.
Keep protected from light.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

8.1 Control parameters

8.1.1 National occupational exposure limit values
AK Unknown
CK Unknown
MK Unknown
OEL
OEB/EHC EHC3

8.1.2 Other occupational exposure limit values
None

8.1.3 Relevant regulations and recommended monitoring procedures
Directive 91/322/EEC (indicative limit values) and its amendments
Directive 98/24/EC (risks related to chemical agents at work) and its amendments

8.2 Exposure controls

8.2.1 Appropriate engineering controls
Suitable general and local exhaust ventilation.
Closed system.

8.2.2 Personal protection equipment

Eye/face protection
Tightly-fitting safety goggles protecting from dust.

Hand protection
Chemical resistant gloves

Respiratory protection
FFP3 dust mask or half mask with suitable filter cartridge
OR
full face mask with suitable filter cartridge in cases where the substance has at least one of the following hazard statements: H341, H351, H361, H362, H311, H314, H317 AND is present at a quantity above 500 g.

Personal protection, general hygienic measures
Remove contaminated clothing. Wash before reuse.
If the handled quantity is above 500g wear full protective clothing in order to avoid skin contact.
Disposable 5,6 type overalls recommended (liquid splash and dust protection).
Provide equipment for eyes flushing and safety shower.

8.2.3 Environmental exposure controlls
It is forbidden to pour into canal. The material and the container must be
disposed.

Stability and reactivity

10.1 Reactivity
Unknown

10.2 Chemical stability
Stable at normal conditions.

10.3 Possibility of hazardous reactions
Unknown

10.4 Conditions to avoid
Ensure storage specifications

10.5 Incompatible materials
Avoid contact with strong acids, bases, and strong oxidising materials.

10.6 Hazardous decomposition products
Unknown

Disposal considerations

13.1 Waste treatment methods

13.1.1 Disposal of the product related waste
Dispose the product according to national, state and local regulations.

13.1.2 Disposal of contaminated packaging
Dispose according to the state and local regulations.

13.1.3 Relevant community, national and regional provisions
Directive 2008/98/EC of the European Parliament and of the Council of 19 November 2008 on waste
Directive 91/689/EEC of hazardous wastes.