Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 609-099-0 | CAS number: 352303-67-4
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://echa.europa.eu/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_environmental-fate-and-pathways.png)
Adsorption / desorption
Administrative data
- Endpoint:
- adsorption / desorption, other
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 13th July 2018 to 2nd August 2018
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 018
- Report date:
- 2018
Materials and methods
Test guideline
- Qualifier:
- according to guideline
- Guideline:
- other: MEP PR China. The Guidelines for the Testing of Chemicals: No. 106 'Adsorption-desorption using a batch equilibrium method (2013)
- GLP compliance:
- yes
- Type of method:
- HPLC estimation method
- Media:
- soil
Test material
- Reference substance name:
- (2-fluoro-3-methoxyphenyl)boronic acid
- EC Number:
- 609-099-0
- Cas Number:
- 352303-67-4
- Molecular formula:
- FC6H3(OCH3)B(OH)2
- IUPAC Name:
- (2-fluoro-3-methoxyphenyl)boronic acid
- Test material form:
- solid: particulate/powder
Constituent 1
Study design
- Test temperature:
- 20 - 25 oC
HPLC method
- Details on study design: HPLC method:
- EQUIPMENT
- Apparatus: Waters e2695-2489 HPLC
- Type, material and dimension of analytical (guard) column: Agent Eclipse XDB-C18 5μm (4.6ID x 250nm)
- Detection system: UV
MOBILE PHASES
- Type: Acetonitrile:0.1% formic acid water solution (30:70)
- Solutes for dissolving test and reference substances: acetonitrile
METHOD LINEARITY
Method linearity was evaluated by analysing calibration standards and plotting areas v concentration.
The LOD is 0.5mg/L
Batch equilibrium or other method
Matrix propertiesopen allclose all
- Matrix no.:
- #1
- Matrix type:
- other: Black
- % Clay:
- 33.4
- % Silt:
- 25.9
- % Sand:
- 40.7
- % Org. carbon:
- 1.16
- pH:
- 6.54
- CEC:
- 28.2 other: cmol/kg
- Matrix no.:
- #2
- Matrix type:
- other: Red
- % Clay:
- 44.5
- % Silt:
- 14.3
- % Sand:
- 41.2
- % Org. carbon:
- 0.57
- pH:
- 5.02
- CEC:
- 12.7 other: cmol/kg
- Matrix no.:
- #3
- Matrix type:
- other: Paddy
- % Clay:
- 18.1
- % Silt:
- 17.1
- % Sand:
- 64.8
- % Org. carbon:
- 1.14
- pH:
- 6.88
- CEC:
- 6.8 other: cmol/kg
- Matrix no.:
- #4
- Matrix type:
- other: Moisture
- % Clay:
- 19.9
- % Silt:
- 17.9
- % Sand:
- 62.2
- % Org. carbon:
- 0.38
- pH:
- 7.82
- CEC:
- 1.9 other: cmol/kg
- Matrix no.:
- #5
- Matrix type:
- other: Aquic Brown
- % Clay:
- 16.5
- % Silt:
- 42.8
- % Sand:
- 40.7
- % Org. carbon:
- 1.19
- pH:
- 5.47
- CEC:
- 7.3 other: cmol/kg
- Details on matrix:
- COLLECTION AND STORAGE
- Geographic location: Huai'an - Jiangsu Province, Shenyang - Liaoning Province, Fu zhu City - Fujian Province, Suihua - Heilongjiang Province and Heze - Shendong Province
- Storage conditions: Room Temperature
- Soil preparation: 2 mm sieved
PROPERTIES
- Soil texture
- % sand: 40.7, 41.2, 64.8, 62.2 and 40.7
- % silt: 25.9, 14.3, 17.1, 17.9 and 42.8
- % clay: 33.4, 44.5, 18.1, 19.9 and 16.5
- pH: 6.54, 5.02, 6.88, 7.82 and 5.47
- Organic carbon (%): 1.16, 0.57, 1.14, 0.38 and 1.9
- CEC (cmol/kg): 28.2, 12.7, 6.8, 1.9 and 7.3
- Moisture (%): 3.3, 1.0, 1.8, 0.7 and 1.6
- Biomass (mg/kg): 360.24, 308.99, 805.86, 75.85 and 267.41 - Details on test conditions:
- Solution Preparation: 0.01 M CaCl2 was prepared by dissolving 4.44g CaCl2 into 4L water.
1) Test 1 - Preliminary Study
(a) Solution/soil ratio 1:1 - red and moisture soil
5.0g soil with 5 mL solution (0.01 M CaCl2) was agitated at 160rpm overnight at 20-25 0C in order to achieve pre-equilibrium. Then soil samples of 40mg/L were prepared by addition of aliquots of stock solution. Another 24 hours agitation was run to reach adsorption equilibrium. Both the concentration of aqueous and oil phases were measured on 2nd, 4th, 6th, 16th and 24th hours to calculate the adsorption percentage and mass balance rate.
A blank run per soil with the same amount of soil with 0.01 M CaCl2 solution (without test substance) were subjected to the same test procedure.
(b) Solution/soil ratio 10:1 - black soil, aquic brown soil and paddy soil
1.0g soil with 10mL solution (0.01 M CaCl2) was agitated at 160rpm overnight at 20-25 0C in order to achieve pre-equilibrium. Then soil samples of 40mg/L were prepared by addition of aliquots of stock solution. Another 24 hours agitation was run to reach adsorption equilibrium. Both the concentration of aqueous and oil phases were measured on 2nd, 4th, 6th, 16th and 24th hours to calculate the adsorption percentage and mass balance rate. A blank run per soil with the same amount of soil with 0.01 M CaCl2 solution (without test substance) were subjected to the same test procedure.
2) Desorption kinetics
Five soils were weighed out and 0.01M CaCl2 was added into centrifugal tubes (ratios as above). The tubes were sealed and agitated overnight to reach pre-equilibrium. Samples with concentrations of 40mg/L were prepared by addition of the standard stock solution and agitated for the adsorption equilibrium time. The sample was centrifuged at 5000rpm for 3 mins. The centrifugal volume was recorded and the aqueous phase was removed. This was replaced by an equal volume of 0.01M CaCl2 solution without the test material. The sample was agitated and analysis was done at 2, 4, 6 ,16 and 24 hours
3) Tier 3 - adsorption isotherms
Five soils were weighed out and 0.01M CaCl2 was added into centrifugal tubes (ratios as above). The tubes were sealed and agitated overnight to reach pre-equilibrium. Samples with concentrations of 8, 20, 50, 100 and 200 mg/L were prepared by addition of the standard solution and agitated for the adsorption equilibrium time. The sample was centrifuged at 5000rpm for 3 mins. The concentration of the aqueous phase or both soil and aqueous phase was determined
4) Desorption isotherms
After the absorption isotherm test and removal of the aqueous phase, an equal volume of 0.01mol/L CaCl2 without test item was added to the soil phase. The samples were agitated for the desorption equilibrium time at 20-25oC. The sample was centrifuged at 5000rpm for 3 mins. The concentration of the aqueous phase was determined.
Duration of adsorption equilibrationopen allclose all
- Sample No.:
- #1
- Duration:
- 24 h
- Initial conc. measured:
- 40 mg/kg soil d.w.
- Temp.:
- 20 - 25 °C
- Sample No.:
- #2
- Duration:
- 24 h
- Initial conc. measured:
- 40 mg/kg soil d.w.
- Temp.:
- 20 - 25 °C
- Sample No.:
- #3
- Duration:
- 24 h
- Initial conc. measured:
- 40 mg/kg soil d.w.
- Temp.:
- 20 - 25 °C
- Sample No.:
- #4
- Duration:
- 24 h
- Initial conc. measured:
- 40 mg/kg soil d.w.
- Temp.:
- 20 - 25 °C
- Sample No.:
- #5
- Duration:
- 24 h
- Initial conc. measured:
- 40 mg/kg soil d.w.
- Temp.:
- 20 - 25 °C
Duration of desorption equilibrationopen allclose all
- Sample no.:
- #1
- Duration:
- 24 h
- Temp.:
- 25 °C
- Sample no.:
- #2
- Duration:
- 24 h
- Temp.:
- 25 °C
- Sample no.:
- #3
- Duration:
- 24 h
- Temp.:
- 25 °C
- Sample no.:
- #4
- Duration:
- 24 h
- Temp.:
- 25 °C
- Sample no.:
- #5
- Duration:
- 24 h
- Temp.:
- 25 °C
- Computational methods:
- -
Results and discussion
Adsorption coefficientopen allclose all
- Key result
- Sample No.:
- #1
- Type:
- Koc
- Value:
- 543.1
- Matrix:
- Black soil
- % Org. carbon:
- 1.16
- Key result
- Sample No.:
- #2
- Type:
- Koc
- Value:
- 175.6
- Matrix:
- Red soil
- % Org. carbon:
- 0.57
- Key result
- Sample No.:
- #3
- Type:
- Koc
- Value:
- 406.1
- Matrix:
- Paddy soil
- % Org. carbon:
- 1.14
- Key result
- Sample No.:
- #4
- Type:
- Koc
- Value:
- 243.2
- Matrix:
- Moisture soil
- % Org. carbon:
- 0.38
- Key result
- Sample No.:
- #5
- Type:
- Koc
- Value:
- 197.4
- Matrix:
- Aquic brown soil
- % Org. carbon:
- 1.19
- Key result
- Sample No.:
- #1
- Type:
- Kd
- Value:
- 6.3
- Matrix:
- Black soil
- % Org. carbon:
- 1.16
- Key result
- Sample No.:
- #2
- Type:
- Kd
- Value:
- 1.001
- Matrix:
- Red soil
- % Org. carbon:
- 0.57
- Key result
- Sample No.:
- #3
- Type:
- Kd
- Value:
- 4.629
- Matrix:
- Paddy soil
- % Org. carbon:
- 1.14
- Key result
- Sample No.:
- #4
- Type:
- Kd
- Value:
- 0.924
- Matrix:
- Moisture soil
- % Org. carbon:
- 0.38
- Key result
- Sample No.:
- #5
- Type:
- Kd
- Value:
- 2.349
- Matrix:
- Aquic brown soil
- % Org. carbon:
- 1.19
Results: Batch equilibrium or other method
Mass balance (%) at end of adsorption phaseopen allclose all
- Sample no.:
- #1
- Duration:
- 24 h
- % Adsorption:
- 95.7
- Sample no.:
- #2
- Duration:
- 24 h
- % Adsorption:
- 104.7
- Sample no.:
- #3
- Duration:
- 24 h
- % Adsorption:
- 96.7
- Sample no.:
- #4
- Duration:
- 24 h
- % Adsorption:
- 94.6
- Sample no.:
- #5
- Duration:
- 24 h
- % Adsorption:
- 97.3
Applicant's summary and conclusion
- Validity criteria fulfilled:
- yes
- Conclusions:
- The Kd values were 1.001, 6.3, 4.629, 0.924 and 2.349 for red, black, paddy, moisture and aquic brown soils respectively. The Koc values were 175.6, 543.1, 406.1, 243.2 and 197.4 for red, black, paddy, moisture and aquic brown soils respectively.
The desorption ratio ranged from 24.8 - 43.6% in the five soil types at 24 hours. - Executive summary:
The adsorption-desorption behaviour of FMBPA (purity 100.2%) on soil was assessed according to the Guidelines of SEPA PR China, the Guidelines Chemical Testing Good Laboratory Practice (HJ/T 155-2004).
Ther HPLC method was used to detect FMBPA. Chromatographic separation was carried out on an Agent Eclipse XDB-C18 5μm (4.6ID x 250nm) column with mobile phase consisting of acetonitrile and 0.1% formic acid in Ultra Water (30/70) at a flow rate of 0.8mL.min. The wavelenght was 210nm. The injection volume was 20μl. The minimum detection concentration was 0.5mg/L for the aqueous phase and 5mg/kg for the soil phase.
Five typical chinese soils (red soil, black soil, paddy soil, moisture soil and aquic brown soil) significantly in cation exchange capacity, clay content, organic matter content and pH value were used in the test.
The air dried soils were weighed into a polypropylene centrifuge tube (250ml) and 0.01M CaCl2 solution added. The soil to CaCl2 solution ratio was 1:1 (5g soil and 5.0ml of 0.01M CaCl2), 1:10 (1g soil and 10.0ml of 0.01M CaCl2) and 1:100 (1g soil and 100.0ml of 0.01M CaCl2). The test item concentration was set at 40mg/L and the adsorption equilibrium time was 24 hours.
The initial concentration was 40ml/L and the soil/solution ratios were 1:1 for red and moisture soils, 1:10 for black, paddy and aquic brown soils. The test substance in aqueous phase was analysed at 2, 4, 6, 16 and 24 hours contact time. The curve was prepared using concentration and time. The adsorption ratio ranged from 24.8 - 50.8% for the five types of soil at 24 hours. The recovery of mass balance ranged from 94.6 - 104.7% for the five types of soil. The Kd values were 1.001, 6.3, 4.629, 0.924 and 2.349 for red, black, paddy, moisture and aquic brown soils respectively. The Koc values were 175.6, 543.1, 406.1, 243.2 and 197.4 for red, black, paddy, moisture and aquic brown soils respectively.
The desorption ratio ranged from 24.8 - 43.6% in the five soil types at 24 hours. The desorption equilibrium time of 24 hours was selected.
Adsorption isotherm test: Five concentrations of 8, 20, 50, 100 and 200 mg/L were used for the definitive test. The soil ratios were 1:1 on red and moisture soils and 1:10 on black, paddy and aquic brown soils.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)