Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

A. Eye contact

- Do not rub your eyes.

- Immediately flush eyes with plenty of water for at least 15 minutes and call a doctor/physician.

B. Skin contact

- Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.

- Laundering enough contaminated clothing before reuse.

C. Inhalation contact

- When exposed to large amounts of steam and mist, move to fresh air.

- Take specific treatment if needed.

D. Ingestion contact

- About whether vomiting should be induces, take the advice of a doctor.

- Rinse your mouth with water immediately.

E. Delayed and immediate effects and also chronic effects from short and long term exposure

- Not available

F. Notes to physician

- Notify medical personnel of contaminated situations and have them take appropriate protective measures.

Fire-fighting measures

A. Suitable (Unsuitable) extinguishing media

- Dry chemical, carbon dioxide, regular foam extinguishing agent, spray

- Avoid use of water jet for extinguishing

B. Specific hazards arising from the chemical

- Not available

C. Special protective actions for firefighters

- Cool containers with water until well after fire is out.

- Keep unauthorized personnel out.

- Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank.

- Notify your local firestation and inform the location of the fire and characteristics hazard.

- Wear appropriate protective equipment.

- Keep containers cool with water spray.

Accidental release measures

A. Personal precautions, protective equipment and emergency procedures

- Ventilate closed spaces before entering.

- Move container to safe area from the leak area.

- Remove all sources of ignition.

- Handling the damaged containers or spilled material after wearing protective equipment.

B. Environmental precautions

- Prevent runoff and contact with waterways, drains or sewers.

- If large amounts have been spilled, inform the relevant authorities.

C. Methods and materials for containment and cleaning up

- Large spill: Stay upwind and keep out of low areas. Dike for later disposal.

- Notification to central government, local government. When emissions at least of the standard amount.

- Dispose of waste in accordance with local regulation.

- Appropriate container for disposal of spilled material collected.

- Small liquid state spills: Appropriate container for disposal of spilled material collected.

- For disposal of spilled material in appropriate containers collected and clear surface.

Handling and storage

A. Precautions for safe handling

- Wash thoroughly after handling.

- Avoid contact with incompatible materials.

- Dealing only with a well-ventilated place.

- Do not handle until all safety precautions have been read and understood.

B. Conditions for safe storage, including any incompatibilities

- Check regularly for leaks.

- Do not apply direct heat.

- Keep in the original container.

- Please pay attention to incompatibilities materials and conditions to avoid.

- Prevent static electricity and keep away from combustible materials or heat sources.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
Not available
Shipping information
Proper shipping name and description:
Not available
Special provisions / remarks
Remarks:
Not available
Shippingopen allclose all
Remarksopen allclose all

Additional transport information

Additional information
Special provisions / remarks / other:
- Local transport follows in accordance with Dangerous Goods Safety Management Law.
- Package and transport follow in accordance with Department of Transportation (DOT) and other regulatory agency requirements.

Exposure controls / personal protection

A. Exposure limits:

ACGIH TVL: not available

OSHA PEL: not available

B. Engineering controls

- A system of local and/or general exhaust is recommended to keep employee exposures above the Exposure Limits. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. The use of local exhaust ventilation is recommended to control emissions near the source.

C. Individual protection measures, such as personal protective equipment

Respiratory protection:

- Under conditions of frequent use or heavy exposure, Respiratory protection may be needed.

- Respiratory protection is ranked in order from minimum to maximum.

- Consider warning properties before use.

- Dust, mist, fume-purifying respiratory protection

- Any air-purifying respirator with a corpuscle filter of high efficiency

- Any respiratory protection with a electromotion fan(for dust, mist, fume-purifying)

- Self-contained breathing apparatus with a corpuscle filter of high efficiency

- For Unknown Concentration or Immediately Dangerous to Life or Health : Any supplied-air respirator with full facepiece and operated in a pressure-demand or other positive-pressure mode in combination with a separate escape supply. Any selfcontained breathing apparatus with a full facepiece.

Eye protection:

- Wear primary eye protection such as splash resistant safety goggles with a secondary protection face shield.

- Provide an emergency eye wash station and quick drench shower in the immediate work area.

Hand protection:

- Wear appropriate glove.

Skin protection:

- Wear appropriate clothing.

Stability and reactivity

A. Chemical Stability

- This material is stable under recommended storage and handling conditions.

B. Possibility of hazardous reactions

- Hazardous Polymerization will not occur.

C. Conditions to avoid

- Avoid contact with incompatible materials and condition.

- Avoid : Accumulation of electrostatic charges, Heating, Flames and hot surfaces

D. Incompatible materials

- Not available

E. Hazardous decomposition products

- May emit flammable vapour if involved in fire.

Disposal considerations

A. Disposal methods

- Since more than two kinds of designaed waste is mixed, it is difficult to treat seperatly, then can be reduction or stabilization

by incineration or similar process.

- If water separation is possible, pre-process with Water separation process.

- Dispose by incineration.

B. Special precautions for disposal

- The user of this product must disposal by oneself or entrust to waste disposer or person who other’s waste recycle and

dispose, person who establish and operate waste disposal facilities.

- Dispose of waste in accordance with all applicable laws and regulations.