Bis[4-(tert-butyl)benzoato-O]hydroxyaluminium

Guidance on Safe Use

First-aid measures

Description of first aid measures

· General information: Take affected persons out of danger area and lay down.

· After inhalation: Supply fresh air; consult doctor in case of complaints.

· After skin contact:

Immediately wash with water and soap and rinse thoroughly.

If skin irritation continues, consult a doctor.

· After eye contact:

Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.

· After swallowing:

Rinse out mouth and then drink plenty of water.

If symptoms persist consult doctor.

· Information for doctor:

· Most important symptoms and effects, both acute and delayed No further relevant information available.

· Indication of any immediate medical attention and special treatment needed

No further relevant information available.

Fire-fighting measures

Extinguishing media

· Suitable extinguishing agents:

CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

Use fire extinguishing methods suitable to surrounding conditions.

· Special hazards arising from the substance or mixture:

Formation of toxic gases is possible during heating or in case of fire.

In case of fire, the following can be released:

Carbon monoxide

· Advice for firefighters

· Protective equipment: Wear self-contained respiratory protective device.

· Additional information

Cool endangered receptacles with water spray.

Collect contaminated fire fighting water separately. It must not enter the sewage system.

Accidental release measures

Personal precautions, protective equipment and emergency procedures

Ensure adequate ventilation

Wear protective clothing.

Avoid formation of dust.

Keep away from ignition sources.

· Environmental precautions: No special measures required.

· Methods and material for containment and cleaning up:

Pick up mechanically.

Dispose of the material collected according to regulations.

Reference to other sections

See "Handling and Storage" for information on safe handling.

See "Exposure controls/personal protection" for information on personal protection equipment.

See "Disposal considerations" for disposal information.

Handling and storage

Handling:

· Precautions for safe handling

Prevent formation of dust.

Any unavoidable deposit of dust must be regularly removed.

Ensure good ventilation/exhaustion at the workplace.

· Information about fire and explosion protection:

Dust can combine with air to form an explosive mixture.

Keep ignition sources away - Do not smoke.

Protect against electrostatic charges.

· Conditions for safe storage, including any incompatibilities

· Storage:

· Requirements to be met by storerooms and receptacles: Store only in the original receptacle.

· Information about storage in one common storage facility: Store away from oxidizing agents.

· Further information about storage conditions:

Store receptacle in a well ventilated area.

Store in cool, dry conditions in well sealed receptacles.

Protect from heat and direct sunlight.

· Specific end use(s) No further relevant information available.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:

Void

Shipping

SpecialProvisions

Inland waterway transport (UN RTDG/ADN(R))

UN number:

Void

Shipping

Remarks

Marine transport (UN RTDG/IMDG)

UN number:

Void

Shipping

Remarks

Air transport (UN RTDG/ICAO/IATA)

UN number:

Void

Shipping

Remarks

SpecialProvisions

Exposure controls / personal protection

Control parameters

· Ingredients with limit values that require monitoring at the workplace: Not required.

· Exposure controls

· Personal protective equipment:

· General protective and hygienic measures:

Do not eat, drink, smoke or sniff while working.

Keep away from foodstuffs, beverages and feed.

The usual precautionary measures are to be adhered to when handling chemicals.

· Respiratory protection:

Use suitable respiratory protective device in case of insufficient ventilation.

Filter P3

· Protection of hands:

The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.

Selection of the glove material on consideration of the penetration times, rates of diffusion and the

degradation.

· Material of gloves

The selection of the suitable gloves does not only depend on the material, but also on further marks of quality

and varies from manufacturer to manufacturer.

Butyl rubber, BR

Nitrile rubber, NBR

PVC gloves

· Penetration time of glove material

The exact break through time has to be found out by the manufacturer of the protective gloves and has to be

observed.

· Eye protection: Safety glasses

· Body protection: Protective work clothing

Stability and reactivity

Reactivity

· Chemical stability

· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.

· Possibility of hazardous reactions No dangerous reactions known.

· Conditions to avoid No further relevant information available.

· Incompatible materials: No further relevant information available.

· Hazardous decomposition products: No dangerous decomposition products known.

Disposal considerations

Waste treatment methods

· Recommendation Must be specially treated adhering to official regulations.

· Uncleaned packaging:

· Recommendation: Disposal must be made according to official regulations.