Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: - | CAS number: -
Boiling point
Administrative data
Link to relevant study record(s)
- Endpoint:
- boiling point
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2014
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- guideline study with acceptable restrictions
- Qualifier:
- no guideline followed
- Principles of method if other than guideline:
- A vaccum reflux apparatus with nitrogen feed to control the vacuum where desired and equipped with type K thermocouple and vacuum gauge reading in Torr, accurate to 0.1 Torr. The boiler of the apparatus has 200 cc of Santicizer Platinum P 1400 places into the boiler. Heat is applied and after attaining a contact reflux at 10 Torr the temperature is recorded.
- GLP compliance:
- no
- Type of method:
- other: Method Reflux at Reduced Pressure
- Specific details on test material used for the study:
- Test material: Santixizer Platinum P1400
Batch No: RP-901
Company supplier: Ferro Corporation - Key result
- Boiling pt.:
- 220.2 °C
- Atm. press.:
- 10 Torr
- Conclusions:
- The boiling point of the test material Santicizer P1400 is 220.2 °C at 10 Torr.
- Executive summary:
The boiling point of the test material Santicizer Platinum P1400 was determinated using the method reflux at a controlled presuure of 10 Torr and held for 15 minutes. The Santicizer Platinum P1400 boiling point is 220.2 °C at 10 Torr.
Reference
Description of key information
The boiling point of the test material Santicizer P1400 is 220.2 °C at 10 Torr.
Key value for chemical safety assessment
- Boiling point at 101 325 Pa:
- 220.2 °C
Additional information
The boiling point of the test material Santicizer P1400 was determined using a vacuum reflux apparatus with nitrogen feed to control the vaccum and equipped with type K thermocouple and vaccum gauge reading in Torr. The measured value is 220.2 °C at 10 Torr.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
