Aluminate(2),[[N,N'-1,2-ethanediylbis[N-(carboxymethyl)glycinato]](4-)-N,N',O,O',ON]hydroxy-,disodium

Explosiveness

Administrative data

Endpoint:

explosiveness, other

Type of information:

experimental study

Adequacy of study:

key study

Study period:

17/04/2015 - 27/04/2015

Reliability:

1 (reliable without restriction)

Rationale for reliability incl. deficiencies:

guideline study

Data source

Reference

Reference Type:

study report

Title:

Unnamed

Year:

2016

Materials and methods

Test guideline

Qualifier:

according to guideline

Guideline:

EU Method A.14 (Explosive properties)

Deviations:

no

GLP compliance:

yes

Test material

Test material information

Constituent 1

Test material form:

solid: flakes

Specific details on test material used for the study:

SOURCE OF TEST MATERIAL
- Source and lot/batch No.of test material:PREVOR, batch 040801#

TREATMENT OF TEST MATERIAL PRIOR TO TESTING
- Treatment of test material prior to testing:
For the test of mechanical sensitivity with respect to shock, (with a BAM Fallhammer apparatus) and the test of mechanical sensitivity with respect to friction ( (BAM friction apparatus), the test item is sieved at 0.5 mm (fraction test used < 0.5 mm). For the test of thermal sensitivity (Koenen tube test), the test item is used as received.

Results and discussion

Small-scale preliminary tests

Small-scale preliminary tests 1

Key result

Parameter:

sensitiveness to impact: impact energy (J)

Value:

40

Remarks on result:

not sensitive to impact using an impact energy of 40 J

Small-scale preliminary tests 2

Key result

Parameter:

sensitiveness to friction: friction load (N)

Value:

360

Remarks on result:

not sensitive to friction using a friction load of 360 N

Small-scale preliminary tests 3

Key result

Parameter:

thermal sensitivity - Koenen test: diameter of the orifice plate

Value:

6

Remarks on result:

not thermal sensitive if heated under defined confinement

Remarks:

fewer than 3 fragments for each 3 runs

Small-scale preliminary tests 4

Key result

Parameter:

thermal sensitivity - Koenen test: limiting diameter (mm)

Value:

2

Remarks on result:

not thermal sensitive if heated under defined confinement

Remarks:

fewer than 3 fragments for each 3 runs

Any other information on results incl. tables

Sensitiveness to impact: The sample of X300 was observed to exhibit no reaction at 40 J. The test result is therefore considered Negative (-)

Sensitiveness to friction: The sample of X300 was observed to exhibit no reaction at 360 N. The test result is therefore considered Negative (-)

Thermal sensitivity: The sample of X300 did not exhibit an explosion during any of the tests. The test result is therefore considered Negative (-)

Applicant's summary and conclusion

Interpretation of results:

GHS criteria not met

Conclusions:

The substance is considered has insensitive to heat, shock nor friction.

Executive summary:

The explosiveness properties were determined by a serie of 3 tests according to the EU A.14 test guideline. The test of thermal sensitivity was performed with a Koenen tube in triplicate for each diameter orifice plate (6 mm and then 2 mm). The test item did not exhibit an explosion during any of the tests. The test result is therefore considered negative. The test of mechanical sensitivity with respect to shock was performed on a test item sieved 0.5 mm prior to testing, using a BAM Fallhammer device and a series of 6 tests was performed dropping a 10 kg mass from 0.40 m (40 J). The test item exhibits no reaction at 40 J. The test result is therefore considered negative. The test of mechanical sensitivity with respect to friction was performed on a test item sieved 0.5 mm prior to testing, using a BAM friction device and a series of 6 tests was performed with a load of 360 N. The test item exhibits no reaction at 360 N. The test result is therefore considered negative. As a conclusion, The substance is considered has insensitive to heat, shock nor friction.