Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 285-107-2 | CAS number: 85029-82-9
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Adsorption / desorption
Administrative data
Link to relevant study record(s)
- Endpoint:
- adsorption / desorption, other
- Remarks:
- Adsorption Coefficient
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- Experimental starting date: 03 January 2017 Experimental completion date: 06 January 2017
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 121 (Estimation of the Adsorption Coefficient (Koc) on Soil and on Sewage Sludge using High Performance Liquid Chromatography (HPLC))
- Version / remarks:
- Method 121 of the OECD Guidelines for Testing of Chemicals, 22 January 2001.
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU Method C.19 (Estimation of the Adsorption Coefficient (KOC) on Soil and Sewage Sludge Using High Performance Liquid Chromatography (HPLC))
- Version / remarks:
- Method C.19 Adsorption Coefficient of Commission Regulation (EC) No 440/2008 of 30 May 2008
- Deviations:
- no
- Principles of method if other than guideline:
- HPLC screening method
- GLP compliance:
- yes (incl. QA statement)
- Type of method:
- HPLC estimation method
- Remarks:
- HPLC screening method
- Media:
- other: Test item (0.1038 g) was diluted to 10 mL with tetrahydrofuran to give a concentration of 10.4 g/L.
- Specific details on test material used for the study:
- Appearance/Physical state: clear amber viscous liquid
Purity: 100% product
Expiry date: 24 June 2018
Storage conditions: room temperature, in the dark - Radiolabelling:
- no
- Test temperature:
- Column temperature: 30 °C
- Details on study design: HPLC method:
- Test System
The determination was carried out using the HPLC screening method, designed to be compatible with Method C.19 Adsorption Coefficient of Commission Regulation (EC) No 440/2008 of 30 May 2008 and Method 121 of the OECD Guidelines for Testing of Chemicals, 22 January 2001.
The test system utilized a high performance liquid chromatograph. A commercially available cyanopropyl reverse phase HPLC column containing lipophilic and polar moieties was used.
Performance of the Test
Preparation of dead time solution
The dead time was determined by measuring the retention time of formamide (purity* 99.94%) at 622 mg/L solution in methanol:water (55:45 v/v).
Preparation of reference standard solutions
Solutions of reference standards (see following table) were prepared in methanol.
Standard Purity (%)* Concentration (mg/L)
Acetanilide 99+ 109
Atrazine 99.1 102
Isoproturon >98.0 114
Triadimenol 98.0 107
Linuron 99.7 104
Naphthalene 99+ 124
Endosulfan-diol 99.9 108
Fenthion 97.9 102
-Endosulfan 99.6 109
Phenanthrene ≥99.5 105
Diclofop-methyl 99.1 104
DDT 98.7 106
* Value quoted by supplier
Preparation of sample solution
Test item (0.1038 g) was diluted to 10 mL with tetrahydrofuran to give a concentration of
10.4 g/L.
Determination of retention time
The sample, dead time and reference standard solutions were injected in duplicate using the following HPLC parameters:
HPLC System : Agilent Technologies 1200, incorporating workstation and autosampler
Detectors : Agilent variable wavelength detector (VWD) and Polymer Laboratories evaporative light scattering detector 2100 (ELSD)
Column : Waters XSelect HSS CN 5µm (150 x 4.6 mm id)
Column temperature : 30 °C
Mobile phase : methanol:water (55:45 v/v)
pH of mobile phase : 6.3
Flow-rate : 1.0 mL/min
Injection volume : 10 µL
VWD detector wavelength : (dead time and reference standards) 210 nm
ELSD parameters : Nebuliser temperature: 40 °C
(sample) evaporator temperature: 80 °C
gas flow: 1.0 L/min
The mobile phase was ramped to 100% tetrahydrofuran shortly after the elution of the last reference standard in order to elute any highly retained test item components. This was carried out for the sample and sample blank injections only.
Evaluation of Data
Capacity factor
The capacity factor was determined using Equation 1.
Equation 1
k' = t r - t 0 divided by t 0
where:
k′ = capacity factor
tr = retention time (min)
t0 = dead time (min)
Construction of the calibration curve
A correlation of log k' versus log Koc of the reference items was plotted using linear regression (Figure 1). The capacity factors (k') for the reference items were calculated from the retention time data of the dead time and reference item solutions. Log10 Koc values of the reference standards are those quoted in Method 121 of the OECD Guidelines for Testing of Chemicals, 22 January 2001.
Adsorption coefficient
The capacity factor of the test item was calculated using Equation 1. The log10 Koc was calculated using Equation 2 with reference to the calibration curve.
Equation 2
log10 Koc = log 10 k' – A divided by B
where:
Koc = adsorption coefficient
k' = capacity factor
A = intercept of the calibration curve
B = slope of the calibration curve - Analytical monitoring:
- yes
- Key result
- Sample No.:
- #1
- Type:
- log Koc
- Value:
- ca. 4.88 - ca. 5.63 other: log10 Koc 4.88 to >5.63.
- Temp.:
- 30 °C
- Remarks on result:
- other: log10 Koc 4.88 to >5.63.
- Details on results (HPLC method):
- Results
Typical chromatography is presented in the attached Appendix 1.
Calibration
The retention times of the dead time and the retention times, capacity factors (k') and log10 Koc values for the reference standards are shown in the following table:
Standard Retention Mean Retention Capacity Log10 Log10
Time (mins) Time (mins) Factor (k') k' Koc
Injection 1 Injection 2
Formamide 1.987 1.987 1.987 - - -
(dead time)
Acetanilide 2.724 2.722 2.723 0.371 -0.431 1.25
Atrazine 3.748 3.743 3.746 0.885 -5.29 x 10-2 1.81
Isoproturon 4.020 4.015 4.017 1.02 9.44 x 10-3 1.86
Triadimenol 5.456 5.466 5.461 1.75 0.243 2.40
Linuron 5.638 5.645 5.642 1.84 0.265 2.59
Naphthalene 4.854 4.850 4.852 1.44 0.159 2.75
Endosulfan-diol 7.089 7.079 7.084 2.57 0.409 3.02
Fenthion 8.411 8.404 8.407 3.23 0.509 3.31
-Endosulfan 12.060 12.062 12.061 5.07 0.705 4.09
Diclofop-methyl 13.003 13.003 13.003 5.55 0.744 4.20
Phenanthrene 9.168 9.170 9.169 3.62 0.558 4.09
DDT 26.055 26.055 26.055 12.1 1.08 5.63
The calibration curve from which the sample results were taken from is shown as Figure 1.
Adsorption Coefficient
The retention times, capacity factor and log10 Koc value determined for the sample are shown in the following table:
Peak Injection Retention Time (mins) Capacity Factor (k') L og10 k' Log10 Koc Mean Log10 Koc
1 1 18.657 8.39 0.924 4.89 4.88
2 18.467 8.29 0.919 4.87
2 1 ≥33.117 >12.1 >1.08 >5.63 >5.63
2 ≥33.120 >12.1 >1.08 >5.63
Overall log10 Koc range: 4.88 to >5.63
Adsorption coefficient range: 7.55 x 104 to >4.27 x 105 - Validity criteria fulfilled:
- yes
- Conclusions:
- The adsorption coefficient of the test item has been determined to be in the range 7.55 x 104 to >4.27 x 105, log10 Koc 4.88 to >5.63.
- Executive summary:
Adsorption Coefficient. In the range 7.55 x 104 to >4.27 x 105, log10 Koc 4.88 to >5.63, using the HPLC screening method, designed to be compatible with Method C.19 Adsorption Coefficient of Commission Regulation (EC) No 440/2008 of 30 May 2008 and Method 121 of the OECD Guidelines for Testing of Chemicals, 22 January 2001.
Reference
Description of key information
The adsorption coefficient of the test item has been determined to be in the range 7.55 x 104 to >4.27 x 105, log10 Koc 4.88 to >5.63.
Key value for chemical safety assessment
- Koc at 20 °C:
- 427 000
Additional information
Adsorption Coefficient. In the range 7.55 x 104 to >4.27 x 105, log10 Koc 4.88 to >5.63, using the HPLC screening method, designed to be compatible with Method C.19 Adsorption Coefficient of Commission Regulation (EC) No 440/2008 of 30 May 2008 and Method 121 of the OECD Guidelines for Testing of Chemicals, 22 January 2001.
[LogKoc: 4.88]
[LogKoc: 5.63]
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.