Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 234-201-1 | CAS number: 10595-06-9
Viscosity
Administrative data
Link to relevant study record(s)
- Endpoint:
- viscosity
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- other: Short summary of results
- Qualifier:
- no guideline available
- Principles of method if other than guideline:
- This test method covers the determination of viscosity of liquid with the Brookfield viscometer (Model : LV Type, Cone/Plate). The “gap” between the cone and the plate must be verified/adjusted before measurements are made.
This is done by moving the plate(built into the sample cup) up towards the cone until the pin in the center of the cone touches the surface of the plate, and then by separating(lowering) the plate 0.0005inch(0.013mm).
When operating the Cone/Plate at elevated temperature, the gap must be set with the cup and spindle equilibrated at the temperature recommended. The temperature is 25.0 °C and is controlled within 0.1°C. - GLP compliance:
- not specified
- Type of method:
- other: Cone/Plate
- Specific details on test material used for the study:
- Miramer M141 = acrylated resin mainly based on Phenoxyethyl methacrylate (CAS Number: 10595-06-9). Mw = 206g/mol (C12H14O3).
- Key result
- Temp.:
- other: 25 degree celcius
- Parameter:
- dynamic viscosity (in mPa s)
- Value:
- 7.8
- Conclusions:
- The viscosity of 2-Phenoxyethyl methacrylate (Miramer M141) was determined with the Brookfield viscometer (Model : LV Type, Cone/Plate). The viscosity was determined to be 7.8 mPas at 25oC.
- Executive summary:
The viscosity of 2-Phenoxyethyl methacrylate (Miramer M141) was determined with the Brookfield viscometer (Model : LV Type, Cone/Plate) No specific information were given on guideline or standard (QA), which the study was performed under.
The viscosity was determined to be 7.8 mPas at 25oC.
Reference
Sample# |
Viscosity at Cone spindle #62, sampleVolume:0.5ml, torque: 50 -80% |
|
mPa.s |
MIRAMER M141(Lot#1604291L7) |
7.8 |
Description of key information
The viscosity of 2-Phenoxyethyl methacrylate (Miramer M141) was determined with the Brookfield viscometer (Model : LV Type, Cone/Plate )No specific information were given on guideline or standard (QA), which the study was performed under.
The viscosity was determined to be 7.8 mPas at 25oC.
Key value for chemical safety assessment
- Viscosity:
- 7.8 mPa · s (dynamic)
- at the temperature of:
- 25 °C
Additional information
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
