Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 202-859-9 | CAS number: 100-51-6
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Uses by professional workers
Documentsopen allclose all
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Non industrial spraying with lance - conc. 10 % (only horizontal and downward spraying) High Application rate - Epoxy Resins
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Non industrial spraying with lance - conc. 10 % (spraying in any direction) High Application rate - Epoxy Resins
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Non industrial spraying with lance - conc. 10 % (only horizontal and downward spraying) - Epoxy Resins
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Non industrial spraying with lance - conc. 10 % (spraying in any direction) - Epoxy Resins
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Non industrial spraying without lance - conc. 10 % (only horizontal and downward spraying) - Epoxy Resins
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Non industrial spraying without lance - conc. 10 % (spraying in all directions) - Epoxy Resins
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Product category used:
- PC 1: Adhesives, sealants
- PC 3: Air care products
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 39: Cosmetics, personal care products
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Wide dispersive outdoor use of processing aids in open systems
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Mixing or blending in Batch process
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Calendering operations
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- Transfer of substance or mixture (cahrging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Transfer of substance or mixture charging and discharging) at dedicated facililties
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Transfer of substance or mixture into small Containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Roller application or brushing - Stripping Application
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Non industrial spraying with lance - conc. 70 % (only horizontal and downward spraying) - Stripping Application
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Non industrial spraying with lance - conc. 70 % (spraying in any direction) - Stripping Application
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Non industrial spraying with lance - conc. 50 % (only horizontal and downward spraying) - Stripping Application
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Non industrial spraying with lance - conc. 50 % (spraying in any direction) - Stripping Application
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Non industrial spraying without lance - conc. 20 % (spraying in any direction) - Stripping Application
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Low energy Manipulation and handling of substances bound in/on materials or articles
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Name of activity / technique:
- High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Name of activity / technique:
- Other hot work operations with metals
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- Sector of end use:
- SU 9: Manufacture of fine chemicals
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use as laboratory reagent
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
Contributing activity / technique for workers
- Name of activity / technique:
- Professional use as laboratory reagent
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 0: Other: Laboratory use
- Sector of end use:
- SU 9: Manufacture of fine chemicals
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use by professional worker
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Mixing or blending in Batch process
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Calendering operations
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- Transfer of substance or mixture (cahrging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Transfer of substance or mixture charging and discharging) at dedicated facililties
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Transfer of substance or mixture into small Containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Roller application or brushing - Stripping Application
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Non industrial spraying with lance - conc. 70 % (only horizontal and downward spraying) - Stripping Application
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Non industrial spraying with lance - conc. 70 % (spraying in any direction) - Stripping Application
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Non industrial spraying with lance - conc. 50 % (only horizontal and downward spraying) - Stripping Application
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Non industrial spraying with lance - conc. 50 % (spraying in any direction) - Stripping Application
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Non industrial spraying without lance - conc. 20 % (spraying in any direction) - Stripping Application
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Low energy Manipulation and handling of substances bound in/on materials or articles
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Name of activity / technique:
- High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Name of activity / technique:
- Other hot work operations with metals
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- Sector of end use:
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 6: Calendering operations
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 6: Calendering operations
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 25: Other hot work operations with metals
- Product category used:
- PC 1: Adhesives, sealants
- PC 3: Air care products
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 39: Cosmetics, personal care products
- Sector of end use:
- SU 0: Other: Professional uses: Public domain
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- PROC 13: Treatment of articles by dipping and pouring
- Sector of end use:
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
Contributing activity / technique for workers
- Name of activity / technique:
- Use indoors
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 11: Non industrial spraying
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 35: Washing and cleaning products
- PC 39: Cosmetics, personal care products
- Sector of end use:
- SU 0: Other: Other: Professional uses: Public domain
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Professional Use (Environment)
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
Contributing activity / technique for workers
- Name of activity / technique:
- Professional Use (Workers)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- Sector of end use:
- SU 20: Health services
- SU 24: Scientific research and development
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- benzyl alcohol
- Type of composition:
- legal entity composition of the substance
- State / form:
- liquid
- Related composition:
- benzyl alcohol
- Reference substance:
- benzyl alcohol
- Name of activity / technique:
- Profesional Use of Benzyl alcohol as solvent
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- PROC 13: Treatment of articles by dipping and pouring
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 1: Adhesives, sealants
- PC 3: Air care products
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 18: Ink and toners
- PC 21: Laboratory chemicals
- PC 28: Perfumes, fragrances
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 35: Washing and cleaning products
- PC 39: Cosmetics, personal care products
- Sector of end use:
- SU 20: Health services
- SU 24: Scientific research and development
- SU 0: Other: Service industries
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in an own CSR
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workers
Uses by professional workers
- Name:
- Benzyl alcohol
- Type of composition:
- legal entity composition of the substance
- Reference substance:
- Benzyl alcohol
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Product category used:
- PC 1: Adhesives, sealants
- PC 3: Air care products
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 39: Cosmetics, personal care products
- Sector of end use:
- SU 0: Other: Professional uses: Public domain
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in an own CSR
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workersopen allclose all
Uses by professional workers
- Name:
- 2028599_ITSUK4_benzyl_alcohol
- Type of composition:
- legal entity composition of the substance
- Reference substance:
- 2028599_ITSUK4_benzyl_alcohol
- Name of activity / technique:
- Professional Use - indoors - all uses
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- Name of activity / technique:
- Professional Use - indoors - all uses
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 6: Calendering operations
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 25: Other hot work operations with metals
- Product category used:
- PC 1: Adhesives, sealants
- PC 3: Air care products
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 14: Metal surface treatment products
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 39: Cosmetics, personal care products
- Sector of end use:
- SU 0: Other: Professional uses: Public domain
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use not assessed
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workers
Uses by professional workers
Contributing activity / technique for the environment
- Name of activity / technique:
- Use outdoors
- Environmental release category (ERC):
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
Contributing activity / technique for workers
- Name of activity / technique:
- Use outdoors
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 11: Non industrial spraying
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 35: Washing and cleaning products
- PC 39: Cosmetics, personal care products
- Sector of end use:
- SU 0: Other: Other: Professional uses: Public domain
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
- Name:
- Benzyl alcohol
- Type of composition:
- legal entity composition of the substance
- Reference substance:
- Benzyl alcohol
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 21: Laboratory chemicals
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workers
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Professional use of laundry products; laundry detergent and conditioners, semi-automatic process - preparatory phase only
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Professional use of laundry products; laundry detergent and conditioners, semi-automatic process - use phase
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Professional use of laundry products; laundry detergent and conditioners, manual process - preparatory phase
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Professional use of laundry products; laundry aid (gasing), semi-automatic and manual process - preparatory phase only
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Professional use of laundry products; laundry aid (gasing), semi-automatic and manual process – use phase
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Professional use of laundry products; laundry aid (non-gasing), semi-automatic process - preparatory phase only
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Professional use of laundry products; laundry aid (non-gasing), manual process - preparatory phase only process - preparatory phase
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Professional use of laundry products; prespotter/stain remover, manual process
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Professional use of dishwash products; manual process - preparatory phase
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Professional use of dishwash products; manual process - use phase
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Professional use of dishwash and rinse products; automatic process - preparatory phase
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Professional use of dishwash and rinse products; automatic process - use phase
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Professional use of dishwash products; semi-automatic process - preparatory phase only
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Professional use of dishwash products and Rinse aid; semi-automatic process – use phase
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Professional use of general purpose cleaner, sanitary cleaner, glass cleaner and metal cleaning agent, manual process - preparatory phase
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Professional use of general purpose cleaner, sanitary cleaner, glass cleaner and metal cleaning agent, manual process - use phase
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Professional use of general purpose cleaner, sanitary cleaner, glass cleaner, descaling agent and metal cleaning agent, spray and wipe manual - preparatory phase
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Use of chain maintenance product; automatic spray process - use phase
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Use of chain maintenance product; automatic drip and brush process - preparatory phase
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Professional use of general purpose cleaner, sanitary cleaner, glass cleaner, descaling agent and metal cleaning agent, spray and wipe manual process - use phase
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Professional use of kitchen cleaners; manual process - preparatory phase
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Professional use of kitchen cleaners; manual process - use phase
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Professional use of kitchen cleaners; spray and wipe manual process - preparatory phase
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Professional use of kitchen cleaners; spray and wipe manual process - use phase
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Professional use of descaling agent; manual process - use phase only
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Professional use of descaling agent; dipping process - use phase only
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Professional use of oven/grill cleaner; manual process - use phase only
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Professional use of oven/grill cleaner; spray and wipe manual process - use phase only
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Professional use of surface disinfectant; manual process - preparatory phase
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Professional use of surface disinfectant; manual process - use phase
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Professional use of wet wipes; manual process - use phase only
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Professional use of floor cleaners; manual and semi-automatic process - preparatory phase
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Professional use of floor cleaners; manual and semi-automatic process -
use phase - Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Professional use of floor cleaners; spray and wipe manual process - preparatory phase
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Professional use of floor cleaners; spray and wipe manual process - use phase
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Professional use of floor strippers and carpet cleaners; manual and semi-automatic process - preparatory phase
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Professional use of floor strippers and carpet cleaners; manual and semi-automatic process - use phase
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Professional use of carpet cleaners; spray and brush manual process - use phase only
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Professional use of drain cleaners; manual process - use phase only
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Professional use of car wash and dewaxing products; semi-automatic process - preparatory phase
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Professional use of car wash and dewaxing products; semi-automatic process - use phase
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Professional use of car wash products and boat cleaners; spray and rinse process and spray and wipe manual process - preparatory phase
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Professional use of car wash products and boat cleaners; spray and rinse process and spray and wipe manual process - use phase
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Professional use of boat cleaners; manual process - preparatory phase
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Professional use of boat cleaners; manual process - use phase
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Professional use of façade/surface cleaner; high and medium pressure process - preparatory phase
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Professional use of façade/surface cleaner; high and medium pressure process - use phase
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Professional use of medical devices; semi-automatic process - preparatory phase
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Professional use of medical devices; semi-automatic process – use phase
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Professional use of medical devices; semi-automatic process - use phase
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Professional use of medical devices; dipping process - preparatory phase
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Professional use of medical devices; dipping process - use phase
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Professional use of medical devices; manual process - preparatory phase
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Professional use of medical devices; manual process - use phase
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Professional use of medical devices; spray process - preparatory phase
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Professional use of medical devices; spray process - use phase
- Process category (PROC):
- PROC 11: Non industrial spraying
- Product category used:
- PC 35: Washing and cleaning products
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Professional use of floor care products; polish/impregnating agent (manual or semi-automatic process); use phase only
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Professional use of floor care products; polish/impregnating agent (spray and wipe manual process); use phase only
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Professional use of maintenance products; furniture and leather care products (manual process); use phase only
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Professional use of maintenance products; furniture and leather care products (spray and wipe manual process); use phase
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Professional use of maintenance products; leather care products (semi-automatic process); preparatory phase
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Professional use of maintenance products; leather care product (automatic process) - preparation phase
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Professional use of maintenance products; leather care product (automatic process) - use phase
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Professional use of maintenance products; drain unblocker (manual process, use phase only)
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Professional use of maintenance products; stainless steel care; manual process (use phase only)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Professional use of maintenance products; stainless steel care; spray and wipe manual process (use phase only)
- Process category (PROC):
- PROC 11: Non industrial spraying
- Product category used:
- PC 31: Polishes and wax blends
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- Sector of end use:
- SU 0: Other: Used in paint removers
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 6: Calendering operations
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 25: Other hot work operations with metals
- Product category used:
- PC 1: Adhesives, sealants
- PC 3: Air care products
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 39: Cosmetics, personal care products
- Sector of end use:
- SU 0: Other: Professional uses: Public domain
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Non industrial spraying with lance - conc. 70 % (only horizontal and downward spraying) - Stripping Application
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Non industrial spraying with lance - conc. 70 % (spraying in any direction) - Stripping Application
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Non industrial spraying with lance - conc. 50 % (only horizontal and downward spraying) - Stripping Application
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Non industrial spraying with lance - conc. 50 % (spraying in any direction) - Stripping Application
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Non industrial spraying without lance - conc. 20 % (spraying in any direction) - Stripping Application
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Product category used:
- PC 1: Adhesives, sealants
- PC 3: Air care products
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 39: Cosmetics, personal care products
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use by professional worker
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Mixing or blending in Batch process
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Calendering operations
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- Transfer of substance or mixture (cahrging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Transfer of substance or mixture charging and discharging) at dedicated facililties
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Transfer of substance or mixture into small Containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Roller application or brushing - Epoxy Resins
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Non industrial spraying with lance - conc. 10 % (only horizontal and downward spraying) High Application rate - Epoxy Resins
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Non industrial spraying with lance - conc. 10 % (spraying in any direction) High Application rate - Epoxy Resins
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Non industrial spraying with lance - conc. 10 % (only horizontal and downward spraying) - Epoxy Resins
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Non industrial spraying with lance - conc. 10 % (spraying in any direction) - Epoxy Resins
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Non industrial spraying without lance - conc. 10 % (only horizontal and downward spraying) - Epoxy Resins
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Non industrial spraying without lance - conc. 10 % (spraying in all directions) - Epoxy Resins
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Low energy Manipulation and handling of substances bound in/on materials or articles
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Name of activity / technique:
- High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Name of activity / technique:
- Other hot work operations with metals
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- Sector of end use:
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 10: Roller application or brushing
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Sector of end use:
- SU 0: Other: Use for adhesives, lubrication, soldering, moulding or processing aids in various industry sectors
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- Environmental release category (ERC):
- ERC8b: Widespread use of reactive processing aid (no inclusion into or onto article, indoor)
- Environmental release category (ERC):
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
- Environmental release category (ERC):
- ERC8e: Widespread use of reactive processing aid (no inclusion into or onto article, outdoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Product category used:
- PC 1: Adhesives, sealants
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 18: Ink and toners
- PC 21: Laboratory chemicals
- PC 26: Paper and board treatment products
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 35: Washing and cleaning products
- Sector of end use:
- SU 0: Other: SU22 Professional uses: Public domain
- Subsequent service life relevant to this use:
- no
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
- Regulatory status:
- use in Scientific Research and Development
Contributing activity / technique for the environment
- Name of activity / technique:
- Professional Use (Environment)
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- ERC8b: Widespread use of reactive processing aid (no inclusion into or onto article, indoor)
Contributing activity / technique for workers
- Name of activity / technique:
- Professional Use (Workers)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- Sector of end use:
- SU 20: Health services
- SU 24: Scientific research and development
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Product category used:
- PC 1: Adhesives, sealants
- PC 3: Air care products
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 39: Cosmetics, personal care products
- Sector of end use:
- SU 0: Other: Other: Professional uses: Public domain
- Subsequent service life relevant to this use:
- no
Uses by professional workers
- Name:
- 2028599_ITSUK4_benzyl_alcohol
- Type of composition:
- legal entity composition of the substance
- Reference substance:
- 2028599_ITSUK4_benzyl_alcohol
- Name of activity / technique:
- Laboratory reagent
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- Name of activity / technique:
- Laboratory reagent
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 21: Laboratory chemicals
- Sector of end use:
- SU 0: Other: Laboratory reagent
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use not assessed
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workers
Uses by professional workers
- Name:
- 2028599_ITSUK4_benzyl_alcohol
- Type of composition:
- legal entity composition of the substance
- Reference substance:
- 2028599_ITSUK4_benzyl_alcohol
- Name of activity / technique:
- Professional Use - outdoor - all uses
- Environmental release category (ERC):
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
- Name of activity / technique:
- Professional Use - outdoor - all uses
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 6: Calendering operations
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 25: Other hot work operations with metals
- Product category used:
- PC 1: Adhesives, sealants
- PC 3: Air care products
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 39: Cosmetics, personal care products
- Sector of end use:
- SU 0: Other: Professional uses: Public domain
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use not assessed
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workers
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Wide dispersive outdoor use of processing aids in open systems
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Mixing or blending in Batch process
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Calendering operations
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- Transfer of substance or mixture (cahrging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Transfer of substance or mixture charging and discharging) at dedicated facililties
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Transfer of substance or mixture into small Containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Roller application or brushing - Stripping Application
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Non industrial spraying with lance - conc. 70 % (only horizontal and downward spraying) - Stripping Application
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Non industrial spraying with lance - conc. 70 % (spraying in any direction) - Stripping Application
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Non industrial spraying with lance - conc. 50 % (only horizontal and downward spraying) - Stripping Application
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Non industrial spraying with lance - conc. 50 % (spraying in any direction) - Stripping Application
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Non industrial spraying without lance - conc. 20 % (spraying in any direction) - Stripping Application
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Low energy Manipulation and handling of substances bound in/on materials or articles
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Name of activity / technique:
- High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Name of activity / technique:
- Other hot work operations with metals
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- PROC 13: Treatment of articles by dipping and pouring
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Non industrial spraying with lance - conc. 70 % (only horizontal and downward spraying) - Stripping Application
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Non industrial spraying with lance - conc. 70 % (spraying in any direction) - Stripping Application
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Non industrial spraying with lance - conc. 50 % (only horizontal and downward spraying) - Stripping Application
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Non industrial spraying with lance - conc. 50 % (spraying in any direction) - Stripping Application
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Non industrial spraying without lance - conc. 20 % (spraying in any direction) - Stripping Application
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Product category used:
- PC 1: Adhesives, sealants
- PC 3: Air care products
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 39: Cosmetics, personal care products
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
- Regulatory status:
- other: Used as precursor to a variety of esters, used in the soap, perfume, and flavor industries.
- Name:
- benzyl alcohol
- Type of composition:
- legal entity composition of the substance
- State / form:
- liquid
- Related composition:
- benzyl alcohol
- Reference substance:
- benzyl alcohol
- Name of activity / technique:
- Used as precursor to a variety of esters, used in the soap, perfume, and flavor industries.
- Environmental release category (ERC):
- ERC9a: Widespread use of functional fluid (indoor)
- Name of activity / technique:
- Environmental contributing scenario 1: Used as precursor to a variety of esters, used in the soap, perfume, and flavor industries.
- Environmental release category (ERC):
- ERC9a: Widespread use of functional fluid (indoor)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Worker contributing scenario 1: Use in closed, continuous process with occasional controlled exposure (PROC 2)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Worker contributing scenario 2: Use in closed batch process (synthesis or formulation) (PROC 3)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Worker contributing scenario 3: Professional Use in batch and other process (synthesis) where opportunity for exposure arises (PROC 4)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Worker contributing scenario 4: Calendering operations (PROC 6)
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- Worker contributing scenario 5: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-dedicated facilities (PROC 8a)
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Worker contributing scenario 6: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilities (PROC 8b)
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Worker contributing scenario 7: Transfer of substance or preparation into small containers (dedicated filling line, including weighing) (PROC 9)
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Worker contributing scenario 8: Treatment of articles by dipping and pouring (PROC 13)
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 19: Intermediate
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- yes
- Related assessment:
- use assessed in an own CSR
- Biological Sewage Treatment Plant (STP):
- yes
- Release from the site to::
- surface water
- Release estimation method:
- ERC
- Remarks:
- ERC based
- Release from the site to::
- ambient air
- Release estimation method:
- ERC
- Remarks:
- ERC based
- Release from the site to::
- non-agricultural soil
- Release estimation method:
- ERC
- Remarks:
- ERC based
- Exposed compartment:
- freshwater
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- marine water
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- top predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sewage treatment plant
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- agricultural soil
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (terrestrial)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- air
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Route affected:
- inhalation
- Place of use:
- indoor
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- inhalation (internal) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Route affected:
- inhalation
- Place of use:
- indoor
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- inhalation (internal) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Route affected:
- inhalation
- Route affected:
- dermal
- Place of use:
- indoor
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- inhalation (internal) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Route affected:
- inhalation
- Route affected:
- dermal
- Place of use:
- indoor
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- inhalation (internal) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Route affected:
- inhalation
- Route affected:
- dermal
- Place of use:
- indoor
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- inhalation (internal) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Route affected:
- inhalation
- Route affected:
- dermal
- Place of use:
- indoor
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- inhalation (internal) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Route affected:
- inhalation
- Route affected:
- dermal
- Place of use:
- indoor
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- inhalation (internal) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Route affected:
- inhalation
- Route affected:
- dermal
- Place of use:
- indoor
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- inhalation (internal) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Reference
Contributing activity / technique for the environmentopen allclose all
Contributing activity / technique for workersopen allclose all
Contributing scenario for the environment (related to workers activities)
Conditions of use for the environment
Product (article) characteristic
Amounts used, frequency and duration of use (or from service life)
Other conditions
Conditions and measures related to Biological Sewage Treatment Plant
Other conditions of use
Conditions and measures related to external treatment of waste (including article waste)
Other conditions of use
Other conditions affecting environmental exposure
Other conditions of use
Releases to waste and the environment
Release to the environment
ReleaseEnvirRepopen allclose all
Exposure of the environment
PECopen allclose all
Exposure of humans via the environment
ContribScenWorkersRepopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Other conditions of use
Exposure of workers
ExpEstopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Other conditions of use
Exposure of workers
ExpEstopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions
Technical and organisational conditions and measures
Technical and organisational conditions
EffectivenessRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Other conditions of use
Exposure of workers
ExpEstopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions
Technical and organisational conditions and measures
Technical and organisational conditions
EffectivenessRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Other conditions of use
Exposure of workers
ExpEstopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions
Technical and organisational conditions and measures
Technical and organisational conditions
EffectivenessRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Other conditions of use
Exposure of workers
ExpEstopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions
Technical and organisational conditions and measures
Technical and organisational conditions
EffectivenessRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Other conditions of use
Exposure of workers
ExpEstopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions
Technical and organisational conditions and measures
Technical and organisational conditions
EffectivenessRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Other conditions of use
Exposure of workers
ExpEstopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions
Technical and organisational conditions and measures
Technical and organisational conditions
EffectivenessRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Other conditions of use
Exposure of workers
ExpEstopen allclose all
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 6: Calendering operations
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 21: Laboratory chemicals
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
- Name:
- Benzyl alcohol
- Type of composition:
- legal entity composition of the substance
- Reference substance:
- Benzyl alcohol
- Environmental release category (ERC):
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Product category used:
- PC 1: Adhesives, sealants
- PC 3: Air care products
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 39: Cosmetics, personal care products
- Sector of end use:
- SU 0: Other: Professional uses: Public domain
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in an own CSR
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workersopen allclose all
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Wide dispersive outdoor use of processing aids in open systems
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Mixing or blending in Batch process
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Calendering operations
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- Transfer of substance or mixture (cahrging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Transfer of substance or mixture charging and discharging) at dedicated facililties
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Transfer of substance or mixture into small Containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Roller application or brushing - Epoxy Resins
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Non industrial spraying with lance - conc. 10 % (only horizontal and downward spraying) High Application rate - Epoxy Resins
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Non industrial spraying with lance - conc. 10 % (spraying in any direction) High Application rate - Epoxy Resins
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Non industrial spraying with lance - conc. 10 % (only horizontal and downward spraying) - Epoxy Resins
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Non industrial spraying with lance - conc. 10 % (spraying in any direction) - Epoxy Resins
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Non industrial spraying without lance - conc. 10 % (only horizontal and downward spraying) - Epoxy Resins
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Low energy Manipulation and handling of substances bound in/on materials or articles
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Name of activity / technique:
- High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Name of activity / technique:
- Other hot work operations with metals
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- Sector of end use:
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Product category used:
- PC 1: Adhesives, sealants
- PC 3: Air care products
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 39: Cosmetics, personal care products
- Sector of end use:
- SU 0: Other: Professional uses: Public domain
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Product category used:
- PC 1: Adhesives, sealants
- PC 3: Air care products
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 18: Ink and toners
- PC 19: Intermediate
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 39: Cosmetics, personal care products
- PC 0: Other: Building & Construction, Distributors
- Sector of end use:
- SU 0: Other: Professional uses: Public domain
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Mixing or blending in Batch process
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Transfer of substance or mixture (cahrging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Transfer of substance or mixture charging and discharging) at dedicated facililties
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Transfer of substance or mixture into small Containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Roller application or brushing - Epoxy Resins
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 3: Air care products
- PC 18: Ink and toners
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 39: Cosmetics, personal care products
- Sector of end use:
- SU 0: Other: Public domain
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Professional use(environment)
- Environmental release category (ERC):
- ERC8b: Widespread use of reactive processing aid (no inclusion into or onto article, indoor)
Contributing activity / technique for workers
- Name of activity / technique:
- Professional use(worker)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- Sector of end use:
- SU 20: Health services
- SU 24: Scientific research and development
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Mixing or blending in Batch process
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Transfer of substance or mixture (cahrging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Transfer of substance or mixture charging and discharging) at dedicated facililties
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Transfer of substance or mixture into small Containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Roller application or brushing - Epoxy Resins
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 3: Air care products
- PC 18: Ink and toners
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 26: Paper and board treatment products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 39: Cosmetics, personal care products
- Sector of end use:
- SU 0: Other: Public domain
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Product category used:
- PC 1: Adhesives, sealants
- PC 3: Air care products
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 18: Ink and toners
- PC 19: Intermediate
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 39: Cosmetics, personal care products
- PC 0: Other: Building & Construction, Distributors
- Sector of end use:
- SU 0: Other: Professional uses: Public domain
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Product category used:
- PC 1: Adhesives, sealants
- PC 3: Air care products
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 39: Cosmetics, personal care products
- Sector of end use:
- SU 0: Other: Professional uses: Public domain
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses by professional workers
- Regulatory status:
- use in plant protection products
- other: Profesional Use as an insect repellent
- Name:
- benzyl alcohol
- Type of composition:
- legal entity composition of the substance
- State / form:
- liquid
- Related composition:
- benzyl alcohol
- Reference substance:
- benzyl alcohol
- Name of activity / technique:
- Profesional Use as an insect repellent
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- Name of activity / technique:
- Environmental contributing scenario 1: Profesional Use as an insect repellent
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Worker contributing scenario 1: Use in closed, continuous process with occasional controlled exposure (PROC 2)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Worker contributing scenario 2: Use in closed batch process (synthesis or formulation) (PROC 3)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Worker contributing scenario 3: Professional Use in batch and other process (synthesis) where opportunity for exposure arises (PROC 4)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Worker contributing scenario 4: Treatment of articles by dipping and pouring (PROC 13)
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Worker contributing scenario 5: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-dedicated facilities (PROC 8a)
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Product category used:
- PC 19: Intermediate
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in an own CSR
- Biological Sewage Treatment Plant (STP):
- yes
- Release from the site to::
- surface water
- Release estimation method:
- ERC
- Remarks:
- ERC based
- Release from the site to::
- ambient air
- Release estimation method:
- ERC
- Remarks:
- ERC based
- Release from the site to::
- non-agricultural soil
- Release estimation method:
- ERC
- Remarks:
- ERC based
- Exposed compartment:
- freshwater
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- marine water
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- top predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sewage treatment plant
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- agricultural soil
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (terrestrial)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- air
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Route affected:
- inhalation
- Place of use:
- indoor
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- inhalation (internal) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Route affected:
- inhalation
- Place of use:
- indoor
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- inhalation (internal) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Route affected:
- inhalation
- Route affected:
- dermal
- Place of use:
- indoor
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- inhalation (internal) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Route affected:
- inhalation
- Route affected:
- dermal
- Place of use:
- indoor
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- inhalation (internal) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Route affected:
- inhalation
- Route affected:
- dermal
- Place of use:
- indoor
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- inhalation (internal) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Reference
Contributing activity / technique for the environmentopen allclose all
Contributing activity / technique for workersopen allclose all
Contributing scenario for the environment (related to workers activities)
Conditions of use for the environment
Product (article) characteristic
Amounts used, frequency and duration of use (or from service life)
Other conditions
Conditions and measures related to Biological Sewage Treatment Plant
Other conditions of use
Conditions and measures related to external treatment of waste (including article waste)
Other conditions of use
Other conditions affecting environmental exposure
Other conditions of use
Releases to waste and the environment
Release to the environment
ReleaseEnvirRepopen allclose all
Exposure of the environment
PECopen allclose all
Exposure of humans via the environment
ContribScenWorkersRepopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Other conditions of use
Exposure of workers
ExpEstopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Other conditions of use
Exposure of workers
ExpEstopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions
Technical and organisational conditions and measures
Technical and organisational conditions
EffectivenessRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Other conditions of use
Exposure of workers
ExpEstopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions
Technical and organisational conditions and measures
Technical and organisational conditions
EffectivenessRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Other conditions of use
Exposure of workers
ExpEstopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions
Technical and organisational conditions and measures
Technical and organisational conditions
EffectivenessRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Other conditions of use
Exposure of workers
ExpEstopen allclose all
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Non industrial spraying with lance - conc. 10 % (only horizontal and downward spraying) High Application rate - Epoxy Resins
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Non industrial spraying with lance - conc. 10 % (spraying in any direction) High Application rate - Epoxy Resins
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Non industrial spraying with lance - conc. 10 % (only horizontal and downward spraying) - Epoxy Resins
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Non industrial spraying with lance - conc. 10 % (spraying in any direction) - Epoxy Resins
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Non industrial spraying without lance - conc. 10 % (only horizontal and downward spraying) - Epoxy Resins
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Non industrial spraying without lance - conc. 10 % (spraying in all directions) - Epoxy Resins
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Product category used:
- PC 1: Adhesives, sealants
- PC 3: Air care products
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 39: Cosmetics, personal care products
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.