Isopropylamine

Flammability

Link to relevant study record(s)

Reference

Reference 1

Endpoint:

substances / mixtures which in contact with water emit flammable gases

Data waiving:

study scientifically not necessary / other information available

Justification for data waiving:

the study does not need to be conducted because the organic substance does not contain metals or metalloids and hence, the classification procedure does not need to be applied

the study does not need to be conducted because the substance is known to be soluble in water to form a stable mixture

Reference 2

Endpoint:

flammable solids

Data waiving:

study technically not feasible

Justification for data waiving:

the study does not need to be conducted because the substance is a liquid

Reference 3

Endpoint:

pyrophoric liquids

Data waiving:

study scientifically not necessary / other information available

Justification for data waiving:

the study does not need to be conducted because the substance is known to be stable in contact with air at room temperature for prolonged periods of time (days) and hence, the classification procedure does not need to be applied

other:

Reference 4

Endpoint:

self-heating substances / mixtures

Data waiving:

study technically not feasible

Justification for data waiving:

the study does not need to be conducted because the substance is a liquid

Description of key information

flammable liquid category 1 (H224: "Extremely flammable liquid and vapour")

The substance has no pyrophoric properties and does not liberate flammable gases on contact with water.

Key value for chemical safety assessment

Flammability:

flammable

Additional information

See below for details.

Justification for classification or non-classification

The liquid submission substance is classified based on flash point and boiling point: According to REGULATION (EC) No. 1272/2008 (CLP) as well as UN-GHS rev. 7 (2017) the substance is classified as a flammable liquid category 1 (H224: "Extremely flammable liquid and vapour") based on a flash point of <23 °C and an initial boiling point <= 35°C (32 °C).

Ignition on contact with air

The test item is according to the Guidance on the Application of the CLP Criteria (1) known from practical handling to be not pyrophoric. It is produced, handled and stored under normal conditions in air without any observation in respect to pyrophoric properties. Therefore, there is no likelihood that the test item possesses pyrophoric properties. According to these facts further testing in respect to these properties is not required.

 

Release of flammable gases in contact with water (based on expert statement)

The test item does according to the UN Manual of Tests and Criteria (2) show one or more of the following properties:

1. The chemical structure of the substance does not contain metals or metalloids;

2. Experience in production or handling shows that the substance does not react with water, e.g. the substance is manufactured in water or washed with water;

3. The substance is known to be soluble in water to form a stable mixture.

Therefore it is considered as not forming flammable gases in contact with water.

According to this fact further testing in respect to these properties is not required.

 

According to (1), the phenomenon of self-heating applies only to solids. The surface of liquids is not large enough for reaction with air and the available test method is not applicable to liquids. Therefore liquids are not classified as self-heating.

 

(1) Guidance on the Application of the CLP Criteria; ECHA-17-G-21-EN, July 2017

(2) UN Manual of Tests and Criteria; Sixth revised edition; United Nations 2015; Appendix 6 SCREENING PROCEDURES