Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 209-909-9 | CAS number: 597-82-0
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://echa.europa.eu/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_environmental-fate-and-pathways.png)
Biodegradation in water and sediment: simulation tests
Administrative data
Link to relevant study record(s)
- Endpoint:
- biodegradation in water: sediment simulation testing
- Type of information:
- experimental study
- Adequacy of study:
- supporting study
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 308 (Aerobic and Anaerobic Transformation in Aquatic Sediment Systems)
- Version / remarks:
- adopted in 2002
- Deviations:
- yes
- Remarks:
- TOC content of TS1 was slightly below the recommended 0.5 %. The difference in TOC content between TS 1 and TS 2 was 1.8% at arrival at the lab, but > 2% at the beginning of acclimatization and at the beginning and end of the exposure
- GLP compliance:
- yes (incl. QA statement)
- Specific details on test material used for the study:
- SOURCE OF TEST MATERIAL
- Source (i.e. manufacturer or supplier) and lot/batch number of test material: 1281-1012
- Purity, including information on contaminants, isomers, etc.: 100%
RADIOLABELLING INFORMATION
- Radiochemical purity: 100%
- Specific activity (a.i.): 2.57 MBq/mg
- Locations of the label: phenyl-ring-U-C14
STABILITY AND STORAGE CONDITIONS OF TEST MATERIAL
- Storage condition of test material:
Test substance in acetonitrile: stored at <= -18 °C in the dark
Test substance stock solution in acetone: stored at 4.2°C - 12.5°C in the dark
- Stability and homogeneity of the test material in the vehicle/solvent under test conditions (e.g. in the exposure medium) and during storage:
The stability of the test substance under storage conditions was confirmed by measurement of the test substance dissolved in acetonitrile before exposure (99.9%) and after the end of experimental exposure in acetone stock solutions (100%) - Radiolabelling:
- yes
- Remarks:
- Phenyl-ring-U-C14
- Oxygen conditions:
- aerobic
- Inoculum or test system:
- natural water / sediment
- Details on source and properties of surface water:
- 1) Test system 1 "Ranschgraben" (hereafter "TS 1")
- Details on collection (e.g. location, sampling depth, contamination history, procedure):
Stream named “Ranschgraben” west from the city of Schifferstadt, near the federal road L 532 surrounded by a forest (GPS coordinate 94.403855, 8.402153). The water was colourless, but slightly cloudy and without any specific odour.
- Temperature (°C) at time of collection: 13.1 °C
- pH at time of collection: 7.5
- Redox potential (mv): Start of Exposure: 94 mV; End of Exposure: 271 mV in control assays
- Oxygen concentration (mg/l): Start of Exposure 7.8 mg/L; End of Exposure: 8.45 mg/L in control assays
- Water filtered: no
2) Test system "Berghäuser Altrhein" (hereafter "TS 2")
- Details on collection (e.g. location, sampling depth, contamination history, procedure):
Side arm of the river Rhein named “Berghäuser Altrhein” south from the city of Speyer, near the industrial park south surrounded by a forest (GPS coordinate 49.292256, 8.448619). The water was clear and colourless and without any particular odour.
- Temperature (°C) at time of collection: 16.6 °C
- pH at time of collection: -
- Redox potential (mv): Start of Exposure: 176 mV; End of exposure: 265.5 mV in control assays
- Oxygen concentration (mg/l): Start of Exposure: 7.3 mg/L; End of Exposure: 8.4 mg/L in control assays
- Water filtered: no - Details on source and properties of sediment:
- 1) Test system "Ranschgraben" (TS 1)
- Details on collection (e.g. location, sampling depth, contamination history, procedure):
Stream named “Ranschgraben” west from the city of Schifferstadt, near the federal road L 532 surrounded by a forest (GPS coordinate 94.403855, 8.402153). The sediment smelled slightly mouldy and appeared grey/brown.
- Textural classification (i.e. %sand/silt/clay): Coarse Texture with 0.33% clay and silt
- pH at time of collection: 7.6
- Organic carbon (%): 0.2% TOC (start of exposure)
- Redox potential (mv): Start of Exposure: -107 mV; End of exposure: -169 mV in control assays
- Biomass (e.g. in mg microbial C/100 mg, CFU or other): Start of Exposure 1.2*10^6 cfu/g; End of exposure 1.2*10^5 cfu/g in control assays
- Sediment samples sieved: yes, first through a 20 mm sieve and afterwards through a 2 mm sieve
2) Test system "Berghäuser Altrhein" (TS 2)
- Details on collection (e.g. location, sampling depth, contamination history, procedure):
Side arm of the river Rhein named “Berghäuser Altrhein” south from the city of Speyer, near the industrial park south surrounded by a forest (GPS coordinate 49.292256, 8.448619). The sediment smelled neutral and appeared grey/brown.
- Textural classification (i.e. %sand/silt/clay): Fine texture with 52.1% clay and silt
- pH at time of collection: 7.6
- Organic carbon (%): 2.3% TOC (start of exposure)
- Redox potential (mv): Start of Exposure: -153 mV; End of exposure - 183 mV in control assays
- Biomass (e.g. in mg microbial C/100 mg, CFU or other): Start of Exposure 2.1*10^7 cfu/g; End of Exposure 7.4*10^5 cfu/g
- Sediment samples sieved: yes, first through a 20 mm sieve and afterwards through a 2 mm sieve - Duration of test (contact time):
- 100 d
- Initial conc.:
- 622 µg/L
- Based on:
- test mat.
- Remarks:
- equivalent to ~0.8 MBq in 500 mL water phase
- Parameter followed for biodegradation estimation:
- CO2 evolution
- radiochem. meas.
- Details on study design:
- ACCLIMATIZATION
After filling the test vessels with sediment and water phase, the bottles were closed with a lid containing gas inlet tube attached with the air system that supplied moistened pressurised air (3 bubbles/second in water layer) and incubated under dark conditions at 20 ±2 °C. The test systems were further allowed to equilibrate for 20 days (acclimatization from 05th May 2020 – 25th May 2020) based on the continuous measurements of parameters along with the observation of macroscopic separation of phases in the test vessels.
TEST CONDITIONS
- Volume of test solution/treatment: Approx. 500 mL water with a sediment layer of 252 g dry weight/319 g wet weight (TS1) and 109 g dry weight/236 g wet weight (TS2)
- Composition of medium: TS1: Approx. 6.7 cm of water and 2.6 cm of wet sediment; TS2: Approx. 6.6 cm of water and 2.4 cm of wet sediment; Ratio Volume Water/Sediment approx. 3:1
- Solubilising agent: Acetone
- Test temperature: 21.8 - 22.7 °C
- pH: TS1 water: 8.6 - 8.8; TS1 sediment: 7.1-7.4; TS2 water: 7.6 - 8.2; TS2 sediment: 7.3 - 7.4
- pH adjusted: no
- CEC (meq/100 g): -
- Aeration of dilution water: yes
- Continuous darkness: yes
- Any indication of the test material adsorbing to the walls of the test apparatus: no
TEST SYSTEM
- Culturing apparatus: Standard cylindrical reagent bottles of 1L volume from Schott, narrow necked with standard ground socket (NS 29/32), material: glass soda glass, outer diameter ~ 9.6 cm and 12 cm height.
- Number of culture flasks/concentration: In total 44 test vessels were used for the test. For each test system 16 test substance assays (TA), 2 inhibition assays (IC), 2 control assays (CA) and 2 solvent control assays (CAS) were tested.
- Method used to create aerobic conditions: The test vessels were closed with a lid containing gas inlet tube attached with the air system that supplied moistened pressurised air (3 bubbles/second in water layer) the air bubbles were as small as possible and the water layer in the test vessels was slightly moved.
- Details of trap for CO2 and volatile organics if used: After the acclimatization phase, the test bottles were connected serially to 4x 250 mL absorption flasks filled with absorption liquids. The first and second trap directly in contact with the test vessel were filled with 100 mL 1 M sodium hydroxide solution for the adsorption of carbon dioxide from biodegradation processes. Third trap consists of 50 mL ethylene glycol to absorb volatile organic substances, and the last flask was filled with 50 mL 0.1 M sulphuric acid for volatile alkali substances.
SAMPLING
- Sampling frequency: Two replicates of test vessels with the test substance of each test system were taken after 0 hr, 2d, 8d, 21d, 49d, 65d, 85d and 100d.
DESCRIPTION OF CONTROL AND/OR BLANK TREATMENT PREPARATION
CONTROL AND BLANK SYSTEM
- Inoculum blank: 2 control assays without the test item
- Toxicity control: 2 inhibition assays for measuring the toxic or inhibition effects of the test substance on the microbial activity
- Solvent Control: 2 additional control assays with the solvent to measure adverse effects of solvent on the microbial activity of the test system - Test performance:
- No inhibition of microorganisms was observed in the inhibition Controls and the solvent controls.
- Compartment:
- natural water / sediment
- % Total extractable:
- >= 97.4 - <= 101.1
- % Non extractable:
- >= 0.3 - <= 0.5
- % CO2:
- 0
- % Other volatiles:
- 0
- % Recovery:
- 99.7
- St. dev.:
- 1.8
- Remarks on result:
- other: TS 1 - Day 0 - TA 1 and TA 2
- Compartment:
- natural water / sediment
- % Total extractable:
- >= 63.3 - <= 78
- % Non extractable:
- >= 4.6 - <= 4.9
- % CO2:
- >= 0.2 - <= 0.3
- % Other volatiles:
- 0
- % Recovery:
- 77
- St. dev.:
- 7.6
- Remarks on result:
- other: TS 1 - day 100 - TA 15 and TA 16
- Compartment:
- natural water / sediment
- % Total extractable:
- >= 94.4 - <= 100.3
- % Non extractable:
- >= 0.2 - <= 0.5
- % CO2:
- 0
- % Other volatiles:
- 0
- % Recovery:
- 97.8
- St. dev.:
- 2.7
- Remarks on result:
- other: TS 2 - Day 0 - TA 17 and TA 18
- Compartment:
- natural water / sediment
- % Total extractable:
- >= 63.6 - <= 85.9
- % Non extractable:
- >= 4.4 - <= 8
- % CO2:
- >= 0.1 - <= 0.2
- % Other volatiles:
- 0
- % Recovery:
- 82.1
- St. dev.:
- 12.6
- Remarks on result:
- other: TS 2 - day 100 - TA 31 and TA 32
- Compartment:
- natural sediment
- % Total extractable:
- >= 6.8 - <= 7.9
- % Non extractable:
- >= 0.3 - <= 0.5
- Remarks on result:
- other: TS 1 - Day 0 - TA 1 and TA 2
- Compartment:
- natural sediment
- % Total extractable:
- >= 62.9 - <= 77.5
- % Non extractable:
- >= 4.6 - <= 4.9
- Remarks on result:
- other: TS 1 - day 100 - TA 15 and TA 16
- Compartment:
- natural sediment
- % Total extractable:
- >= 3.5 - <= 8.3
- % Non extractable:
- >= 0.2 - <= 0.5
- Remarks on result:
- other: TS 2 - Day 0 - TA 17 and TA 18
- Compartment:
- natural sediment
- % Total extractable:
- >= 63.5 - <= 85.5
- % Non extractable:
- >= 4.4 - <= 8
- Remarks on result:
- other: TS 2 - day 100 - TA 31 and TA 32
- Compartment:
- natural water / sediment: freshwater
- % Total extractable:
- >= 92.1 - <= 94.6
- % Non extractable:
- >= 0.3 - <= 1.3
- Remarks on result:
- other: TS 1 - Day 0 - TA 1 and TA 2
- Compartment:
- natural water / sediment: freshwater
- % Total extractable:
- 0.2
- % Non extractable:
- 0.2
- Remarks on result:
- other: TS 1 - day 100 - TA 15 and TA 16
- Compartment:
- natural water / sediment: freshwater
- % Total extractable:
- >= 90.7 - <= 97.8
- % Non extractable:
- >= 0.2 - <= 0.3
- Remarks on result:
- other: TS 2 - Day 0 - TA 17 and TA 18
- Compartment:
- natural water / sediment: freshwater
- % Total extractable:
- 0 - <= 0.1
- % Non extractable:
- 0.1
- Remarks on result:
- other: TS 2 - day 100 - TA 31 and TA 32
- Parent/product:
- parent
- Compartment:
- total system
- Key result
- % Degr.:
- >= 0.1 - <= 0.3
- Parameter:
- CO2 evolution
- Sampling time:
- 100 d
- Key result
- Compartment:
- natural sediment
- DT50:
- > 1 000 d
- Type:
- (pseudo-)first order (= half-life)
- Temp.:
- 22.3 °C
- Remarks on result:
- other: Test System 2 - Berghäuser Altrhein
- Key result
- Compartment:
- natural water: freshwater
- DT50:
- 1.05 d
- Type:
- (pseudo-)first order (= half-life)
- Temp.:
- 22.3 °C
- Remarks on result:
- other: Test System 2 - Berhäuser Altrhein
- Key result
- Compartment:
- natural water / sediment
- DT50:
- 439 d
- Type:
- (pseudo-)first order (= half-life)
- Temp.:
- 22.3 °C
- Remarks on result:
- other: Total Test System 2 - Berghäuser Altrhein
- Key result
- Compartment:
- natural sediment
- DT50:
- 434 d
- Type:
- (pseudo-)first order (= half-life)
- Temp.:
- 22.3 °C
- Remarks on result:
- other: Test System 1 - Ranschgraben
- Key result
- Compartment:
- natural water: freshwater
- DT50:
- ca. 3 d
- Type:
- (pseudo-)first order (= half-life)
- Temp.:
- 22.3 °C
- Remarks on result:
- other: Test System 1 - Ranschgraben
- Key result
- Compartment:
- natural water / sediment
- DT50:
- 304 d
- Type:
- (pseudo-)first order (= half-life)
- Temp.:
- 22.3 °C
- Remarks on result:
- other: Total Test System 1 - Ranschgraben
- Other kinetic parameters:
- first order rate constant
- Transformation products:
- yes
- No.:
- #1
- No.:
- #2
- No.:
- #3
- Details on transformation products:
- Transformation Product #1
- Retention time: 24.1 min
- Chemical formula: C45H69O4P
- m/z: 705.5006 HESI+
- Formed amount: Minor < 5% TAR
Transformation Product #2
- Retention time: 15.5 min
- Chemical formula: C15H24O
- m/z: 219.175 HESI-
- Formed amount: Minor < 5% TAR
Transformation Product #3:
- Retention time: 1.1 min
- Formed amount: Minor < 3% TAR
The third potential degradation product (retention time 1.1 min) was detected but could not be identified for the following reasons:
- It was not possible to allocate a clear corresponding mass manually
- A comparable isotope pattern to 14C labelled O,O,O-tris(2(or 4))-C9-C10-isoalkylphenyl) phosphothoriate was not archived by compound discoverer
- A reasonable mass was principally found by a compound discoverer search for typical degradation products but the retention time of the proposed mass was not always conform to the retention time of the detector for radioactivity
- There was no evidence for mass which confirmed a connection to 14C labelled O,O,O-tris(2(or 4))-C9-C10-isoalkylphenyl) phosphothoriate
- The fragmentation experiment did not confirm an expected structure
Degradation products of high polarity and very short retention times (1.1 min) are often difficult to identify since the separation process is limited and co-eluting several components is possible - Evaporation of parent compound:
- no
- Volatile metabolites:
- no
- Residues:
- yes
- Details on results:
- TEST CONDITIONS
- Aerobicity (or anaerobicity), moisture, temperature and other experimental conditions maintained throughout the study: Yes
- Anomalies or problems encountered (if yes): Variations observed in the acetone LSC measurements due to the stability and homogeneity of the acetone extracts, which resulted in low recoveries. Several treatment of acetone extracts such as resolving concentrated acetone extract in methanol or dichloromethane and DMSO addition were applied to solve the issue. Additionally adsorption issues in the HPLC vials for some of the samples were observed.
MINOR TRANSFORMATION PRODUCTS
- Range of maximum concentrations in % of the applied amount and day(s) of incubation when observed:
Transformation Product #1: 0.0 - 0.3% Day 65 (TS 1); 3.6 - 4.3% Day 49 (TS 2)
Transformation Product #2: 0.0 - 0.5% Day 85 (TS 1); 1.7 - 4.0% Day 49 (TS 2)
Transformation Product #3: 1.0 - 2.2% Day 85 (TS 1); 0.6 - 1.1% Day 49 (TS 2)
- Range of maximum concentrations in % of the applied amount at end of study period:
Transformation Product #1: 0.0 - 0.0% (TS1); 1.6 - 2.5% (TS 2)
Transformation Product #2: 0.0 - 0.0% (TS1); 1.2 - 1.4% (TS 2)
Transformation Product #3: 0.7 - 1.1% (TS1); 0.7 - 1.2% Day 85 (TS 2)
EXTRACTABLE RESIDUES
- % of applied amount at day 0 (sediment): 6.8 - 7.9%% (TS 1, Ranschgraben); 3.5 - 8.5% (TS 2, Berghäuser Rheinarm)
- % of applied amount at end of study period (sediment): 62.9 - 77.5% (TS 1, Ranschgraben); 63.5 - 85.8% (TS 2, Berghäuser Rheinarm)
NON-EXTRACTABLE RESIDUES
- % of applied amount at day 0: 0.3 - 0.5% (TS1, Ranschgraben); 0.2 - 0.5% (TS 2, Berghäuser Rheinarm)
- % of applied amount at end of study period: 4.6 - 4.9% (TS1, Ranschgraben); 4.4 - 8.0% (TS 2, Berghäuser Rheinarm)
MINERALISATION
- % of applied radioactivity present as CO2 at end of study: 0.1 - 0.3%
VOLATILIZATION
- % of the applied radioactivity present as volatile organics at end of study: 0% - Validity criteria:
- Accuracy of the transformation data
- Observed value:
- See attached document "126019-82-7_OECD 308_Quality Criteria"
- Validity criteria:
- Repeatability and sensitivity of the method of analysis
- Observed value:
- See attached document "126019-82-7_OECD 308_Quality Criteria"
- Validity criteria:
- Recovery Rate
- Observed value:
- See attached document "126019-82-7_OECD 308_Quality Criteria"
- Conclusions:
- The substance is considered to be (very) persistent in the water/sediment systems according to REACh relevant criteria.
- Executive summary:
One study investigating the biodegradability of O,O,O-tris(2(or 4)-C9-10-isoalkylphenyl) phosphorothioate in the environment is available. In this study, the biodegradation rates of the test substance in a water/sediment system and the identification of its biotransformation products and their distribution into water and sediment was investigated according to OECD guideline 308 under GLP conditions using radiolabeled test material (BASF 2021). Two different natural water/sediment systems were used differing in TOC content of the sediment (TS1: 0.2% and TS2: 2.3% AR). The test vessels were incubated in dark conditions at a temperature of 22.3 °C for 100 days. Whole system mineralization of the parent compound to carbon dioxide accounted for 0.2 – 0.3% TAR after 100 days incubation. Formation of organic or inorganic volatile were absent during the exposure. At the end of exposure very few radioactivity was found in water (TS 1: 0.4 - 0.5% TAR, TS 2: 0.1% TAR). The remaining radioactivity was found in sediment (TS1: 76.3%; TS2: 81.5%). NERs in sediment was dependent upon the TOC content of the sediment: TS1: 4.6% - 4.9% TAR and 4.4% - 8.0% TAR.
Half-life of the parent compound for both test systems were calculated and showed a very slow dissipation of the substance in TS 1 (DT50: 304d, total system; 434d, sediment) and TS 2 (DT50: 439d, total system; > 1000d, sediment).
Three minor metabolites were detected, two of them could be identified as tris(nonylphenyl)phosphate (RT = 24.1 min) and Nonylphenol (branched) (RT = 15.5 min) whereas it was not possible to identify the third metabolite (RT = 1.1 min). For tris(nonylphenyl)phosphate a maximum activity of 4.3% TAR (TS 2) was determined, for Nonylphenol (branched) a maximum activity of 4.0% (TS 2) was detected. The rest of the activity can be attributed to the parent compound. The biomass and the other physico-chemical parameters indicated that the condition inside the test systems were stable and the microbiology was active during the exposure time. No inhibition effect of test substance to microorganisms were found. Based on the half-life of O,O,O-tris(2(or 4)-C9-10-isoalkylphenyl) phosphorothioate in sediment and the total system, the substance can be considered very persistent in the environment.
- Endpoint:
- biodegradation in water: simulation testing on ultimate degradation in surface water
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 309 (Aerobic Mineralisation in Surface Water - Simulation Biodegradation Test)
- Version / remarks:
- adopted in April 2004
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Specific details on test material used for the study:
- SOURCE OF TEST MATERIAL
- Source (i.e. manufacturer or supplier) and lot/batch number of test material: BASF SE, 1302-1004
- Purity, including information on contaminants, isomers, etc.: 100%
RADIOLABELLING INFORMATION
- Radiochemical purity: 97%
- Specific activity: 19.4 MBq/mg
- Locations of the label: phenyl ring ([phenyl-U-C14](O,O,O-tris-phenyl)phosphorothionate)
- Expiration date of radiochemical substance: 21 Feb 2021
STABILITY AND STORAGE CONDITIONS OF TEST MATERIAL
- Storage condition of test material: deep frozen (≤ -18 °C), dark, dry - Radiolabelling:
- yes
- Oxygen conditions:
- aerobic
- Inoculum or test system:
- natural water / sediment: freshwater
- Details on source and properties of surface water:
- Water was sampled from a natural aerobic surface water source in Rhineland-Palatinate (67374 Hanhofen, Germany, 49°18'43.9"N, 8°19'10.3"E). Water was sampled from the top 5 cm to 10 cm of each compartment of the natural resources. The sampling was performed on 10 Aug 2020. The water/sediment system was transported in polyethylene containers to the laboratory. Since the transport duration did not exceed 2 to 3 hours, the water samples didn’t have to be cooled. Prior to use, coarse particles were removed from the water by filtration through a filter with 100 µm mesh size. The test water was directly used in the test and did not have to be stored.
Water properties: TOC: 11 mg/L; Total nitrogen: 1.6 mg/L; Total ammonium: 0.33 mg/L; Total phosphorus: < 0.02 mg/L; BOD = 3.8 mg/L O2; pH = 8.26 - Details on source and properties of sediment:
- Sediment was sampled from a natural aerobic surface water source in Rhineland-Palatinate (67374 Hanhofen, Germany, 49°18'43.9"N, 8°19'10.3"E). Sediment was sampled from the top 5 cm to 10 cm of each compartment of the natural resources. The sampling was performed on 10 Aug 2020. The water/sediment system was transported in polyethylene containers to the laboratory. Since the transport duration did not exceed 2 to 3 hours, the water samples didn’t have to be cooled. The sediment was sieved through a 2.0 mm sieve.
Sediment properties: loamy sand (clay: 2.5%, silt: 20%, sand: 77.5%), TOC: 0.35%, CEC: 2.9 mmol/100g, density: 1443 g/L - Duration of test (contact time):
- 61 d
- Initial conc.:
- 10 µg/L
- Based on:
- test mat.
- Initial conc.:
- 2 µg/L
- Based on:
- test mat.
- Parameter followed for biodegradation estimation:
- CO2 evolution
- radiochem. meas.
- test mat. analysis
- Details on study design:
- TEST CONDITIONS
- Volume of test solution/treatment: 500 mL
- Composition of medium: surface water
- Additional substrate: between 5 mg and 10 mg dispersed sediment
- Solubilising agent (type and concentration if used): acetonitrile (The concentration of the organic solvent was below 1% of the amount of test water present in each test vessel.)
- Test temperature: 12.1 °C with a range from 11.3 – 12.9 °C
- pH: 8.1
- pH adjusted: no
- Suspended solids concentration: 11 mg DOC/L
- Continuous darkness: yes
- Any indication of the test material adsorbing to the walls of the test apparatus: no
TEST SYSTEM
- Culturing apparatus: 1000 mL all-glass metabolism flasks (inner diameter: * 10.1 cm; surface: * 80 cm²)
- Number of culture flasks/concentration: 26 flasks, treated with 2 µg/L [14C]TPPT. 16 were analysed (10 flasks as reserve); 26 flasks, treated with 10 µg/L [14C]TPPT. 16 were analysed (10 flasks as reserve); 6 sterile samples, treated with 10 µg/L [14C]TPPT. 2 were analysed (2 flasks as reserve); 8 reference samples (autoclaved test system), treated with 5 µg/L [14C] sodium benzoate and additional the highest amount of solvent, 4 were analysed (4 flasks as reserve); 2 blank controls, treated with the highest amount of solvent
- Method used to create aerobic conditions: The aeration was performed using slightly constant orbital movement and constant air flow
- Test performed in open system: yes
- Details of trap for CO2 and volatile organics if used: The radioactive carbon dioxide evolved in the test flasks was trapped by two series-connected flasks containing sodium hydroxide (60 mL each; 2 M)
SAMPLING
Duplicate samples of each system were worked up at the following sampling time points: 0, 2, 7, 14, 21, 29, 44 and 61 days after treatment (DAT). The flasks for the reference item were sampled on day 0 and 14.
At every sampling time point both flasks were worked up immediately. The samples were analysed on the same day as sampling or stored at ≤-18°C for maximal 36 days prior to analysis.
After analysis, samples were stored in a freezer at ≤-18°. - Reference substance:
- benzoic acid, sodium salt
- Remarks:
- radiolabeled (Benzoic acid [ring-14C(U)]sodium salt)
- Compartment:
- natural water: freshwater
- Sampling date:
- 2020
- % Total extractable:
- 87.1
- % Non extractable:
- 4.5
- % CO2:
- 2
- % Other volatiles:
- < 0.1
- % Recovery:
- 93.7
- Remarks on result:
- other: 10 µg/L treatment, day 61
- Compartment:
- natural water: freshwater
- Sampling date:
- 2020
- % Total extractable:
- 90.2
- % Non extractable:
- 6
- % CO2:
- 0
- % Other volatiles:
- 0
- % Recovery:
- 96.2
- Remarks on result:
- other: 10 µg/L treatment, day 0
- Compartment:
- natural water: freshwater
- Sampling date:
- 2020
- % Total extractable:
- 81.1
- % Non extractable:
- 12.6
- % CO2:
- 3.1
- % Other volatiles:
- <= 0.1
- % Recovery:
- 96.9
- Remarks on result:
- other: 2 µg/L treatment, day 61
- Compartment:
- natural water: freshwater
- Sampling date:
- 2020
- % Total extractable:
- 90.5
- % Non extractable:
- 5.6
- % CO2:
- 0
- % Other volatiles:
- 0
- % Recovery:
- 96.1
- Remarks on result:
- other: 2 µg/L treatment, day 0
- Parent/product:
- parent
- Compartment:
- water
- Key result
- % Degr.:
- >= 3.1 - <= 3.7
- Parameter:
- CO2 evolution
- Sampling date:
- 2020
- Sampling time:
- 61 d
- Remarks on result:
- other: 2 and 10 µg/L treatment
- Key result
- Compartment:
- natural water: freshwater
- DT50:
- > 61 d
- Type:
- (pseudo-)first order (= half-life)
- Temp.:
- 12 °C
- Remarks on result:
- other: 2 µg/L and 10 µg/L treatment
- Transformation products:
- yes
- No.:
- #4
- No.:
- #3
- No.:
- #2
- No.:
- #1
- Details on transformation products:
- - Formation and decline of each transformation product during test: see documents attached
- Pathways for transformation: cleavage of phenol (which is considered to be mineralized to CO2 since phenol was not detected)
- Maximum occurrence of each transformation product: see documents attached
- Other: Two minor metabolites could not be identified (M2, M6, see documents attached) - Evaporation of parent compound:
- no
- Volatile metabolites:
- no
- Residues:
- no
- Details on results:
- TEST CONDITIONS
- Aerobicity (or anaerobicity), moisture, temperature and other experimental conditions maintained throughout the study: Yes
- Anomalies or problems encountered (if yes): no
MINOR TRANSFORMATION PRODUCTS
- Range of maximum concentrations in % of the applied amount and day(s) of incubation when observed: see documents attached
- Range of maximum concentrations in % of the applied amount at end of study period: see documents attached
MINERALISATION
- % of applied radioactivity present as CO2 at end of study: 3.1 - 3.7%
VOLATILIZATION
- % of the applied radioactivity present as volatile organics at end of study: 0 - 0.1 %
STERILE TREATMENTS (if used)
The sterile flasks were sampled and analysed after 61 days of incubation. The recovery of radioactivity was 93.8 % AR. 14CO2 was detected in amounts of 0.8 % AR. No organic volatiles were detected (≤0.1 % AR). The sterile sample showed a similar degradation pattern than the biologically active test flasks. The parent substance was found in the total system at an amount of 88.1 % AR. Four metabolites/impurities were observed (M1, M3, M4 and M5) with maximum amounts of 2.7 % AR. - Results with reference substance:
- After 14 days, 83.4 % AR of the reference item was mineralised. Thus, the test system was biologically active and the test was valid.
- Validity criteria:
- The total recovery (mass balance) at the end of the experiment should be between 90% and 110%
for radiolabelled substances, whereas the initial recovery at the beginning of the experiment should be between 70% and 110% for non-labelled substances. - Observed value:
- Mean recoveries of radioactivity in the water system of the tests with the low (2 µg/L) and high (10 µg/L) test concentrations were within the range of 91.5 % to 96.9 % AR and 93.0 % to 101.1 % AR, respectively.
- Validity criteria fulfilled:
- yes
- Validity criteria:
- The reference substance must be degraded with two weeks.
- Observed value:
- The mean recovery of radioactivity in the water system of the reference samples was 99.3 % and 91.1 % AR at 0 and 14 DAT, respectively. After 14 days 83.4 % AR of the reference item was mineralised.
- Validity criteria fulfilled:
- yes
- Conclusions:
- Based on the test results the test substance can be considered very persistent
- Executive summary:
The study of biodegradation of the test item with two different concentrations in natural aerobic surface water was performed with [14C]TPPT (O,O,O-Triphenylphosphothionate) under aerobic conditions in the dark using natural aerobic surface water from a large water body and dispersed sediment from the respective source. The test water has a dissolved organic carbon content of 11 mg/L and a BOD of 3.8 mg/L. Each vessel was filled with 500 mL water and between 5 mg and 10 mg dispersed sediment. The study was conducted in accordance with the OECD Guideline for Testing of Chemicals No. 309 (April 2004). To be able to determine the degradation rate and to follow the transformation products and due to the low water solubility of the test item, two different application rates (2 µg/L and 10 µg/L) of radio-labelled test item were applied. Based on the specific activity of 19.4 MBq/mg, this corresponds to an applied radioactivity of about 0.019 MBq and 0.097 MBq per vessel, respectively. The test water was incubated in the dark at 12 ± 2°C under constant bubbling of air through the water. The incubation period after treatment was 61 days. Traps for organic volatiles and carbon dioxide were used. Duplicate samples were taken for analysis at specified intervals up to 61 days after application. The water phase was extracted by adding C18 adsorber and extracting it with acetonitrile. The radioactivity (in extract and extracted water phase) was quantified by liquid scintillation counting and characterised by high performance liquid chromatography (HPLC). Thin layer chromatography (TLC) was used for confirmation of metabolites in selected samples.
Mean recoveries of radioactivity in the water system of the tests with the low (2 µg/L) and high (10 µg/L ) test concentrations were within the range of 91.5 % to 96.9 % AR and 93.0 % to 101.1 % AR, respectively. CO2 was observed in amounts of 3.1 % AR for the low and 3.7 % AR for the high test concentration, respectively. No organic volatiles were detected (≤ 0.1 % AR). The amount of [14C]TPPT fluctuated between 80.2 % AR and 90.5 % AR for the low test concentration and between 84.2 % AR and 89.6 % for the high test concentration.
The calculated DT50 values are above the 61 days test period. Thus, the test substance can be considered very persistent in water.
- Endpoint:
- biodegradation in water: sediment simulation testing
- Type of information:
- read-across from supporting substance (structural analogue or surrogate)
- Adequacy of study:
- supporting study
- Reason / purpose for cross-reference:
- read-across source
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 308 (Aerobic and Anaerobic Transformation in Aquatic Sediment Systems)
- Version / remarks:
- adopted in 2002
- Deviations:
- no
- Compartment:
- natural water / sediment
- % Total extractable:
- >= 61.1 - <= 74
- % Non extractable:
- >= 9.9 - <= 10
- % CO2:
- >= 0.2 - <= 0.3
- % Other volatiles:
- 0
- % Recovery:
- 76.8
- St. dev.:
- 10.4
- Remarks on result:
- other: Ranschgraben, day 100
- Remarks:
- Remeasurements of some water and sediment samples are ongoing, due to a adsorption issue with HPLC vials resulting in low recoveries. Thus, the % recovery will be higher after remeasurement. The %CO2 values are not affected.
- Compartment:
- natural water / sediment
- % Total extractable:
- >= 26.2 - <= 45.9
- % Non extractable:
- >= 29.6 - <= 46.1
- % CO2:
- >= 0.1 - <= 0.2
- % Other volatiles:
- 0
- % Recovery:
- 74.1
- St. dev.:
- 25.7
- Remarks on result:
- other: Berghäuser Altrhein; day 100
- Remarks:
- Remeasurements of some water and sediment samples are ongoing, due to a adsorption issue with HPLC vials resulting in low recoveries. Thus, the % recovery will be higher after remeasurement. The %CO2 values are not affected.
- Parent/product:
- parent
- Compartment:
- total system
- Key result
- % Degr.:
- >= 0.1 - <= 0.3
- Parameter:
- CO2 evolution
- Sampling time:
- 100 d
- Key result
- Compartment:
- natural water / sediment
- DT50:
- > 100 d
- Type:
- (pseudo-)first order (= half-life)
- Temp.:
- 20 °C
- Transformation products:
- not specified
- Remarks:
- Identification of transformation products still ongoing.
Referenceopen allclose all
Sample Concentration prior to Analysis
Prior to analysis by HPLC, all samples were concentrated as described in chapter 2.9.4. Procedural recoveries for concentrating the acetonitrile extract lay always between 90 and 110 %. For concentration of the extracted water phase recoveries were below 90 %. Since the remaining radioactivity in the water phase is very small (below 15 % AR, for almost all samples below 6 %AR), there was no significant loss referred to the total amount of radioactivity applied.
Description of key information
Surface water: 3.1 - 3.7% CO2 evolution in 61 days: DT50 > 61d (OECD 309)
Sediment: 0.1 - 0.3% CO2 evolution in 100 days: DT50 > 1000d (OECD 308, read across)
Key value for chemical safety assessment
- Half-life in freshwater:
- 61 d
- at the temperature of:
- 12 °C
- Half-life in freshwater sediment:
- 1 000 d
- at the temperature of:
- 22.3 °C
Additional information
One study is available investigating the biodegradation of O,O,O-triphenyl phosphorothioate under environmental conditions. The study was performed according to GLP and OECD guideline 309 using radiolabelled test material (Schwarzkopf 2021). Two different concentrations (2, 10 µg/L) was tested under aerobic conditions in the dark using natural aerobic surface water from a large water body and dispersed sediment from the respective source. The test water was incubated in the dark at 12 ± 2°C under constant bubbling of air through the water. The incubation period after treatment was 61 days. Traps for organic volatiles and carbon dioxide were used. Duplicate samples were taken for analysis at specified intervals up to 61 days after application. The water phase was extracted by adding C18 adsorber and extracting it with acetonitrile. The radioactivity (in extract and extracted water phase) was quantified by LSC and characterized by HPLC. TLC was used for confirmation of metabolites in selected samples. Mean recoveries of radioactivity were within the range of 91.5 % to 96.9 % AR (2 µg/L) and 93.0 % to 101.1 % AR (10 µg/L), respectively. CO2 was observed in amounts of 3.1 % AR for the low and 3.7 % AR for the higher test concentration, respectively. No organic volatiles were detected (≤ 0.1 % AR). The amount of parent fluctuated between 80.2 % AR and 90.5 % AR for the2 µg/L treatment and between 84.2 % AR and 89.6 % for the 10 µg/L treatment. The calculated DT50 values are above the 61 days test period.
Since the registered substance O,O,O-triphenyl phosphorothioate (CAS 597-82-0) was identified as very persistent in natural surface waters. According to ECHA "Guidance on Information Requirements and Chemical Safety Assessment Chapter R.11: PBT/vPvB assessment", Section R.11.4.1.1 (ECHA, version 3.0, June 2017) if a substance or its degradation products are concluded to be persistent or very persistent in one environmental compartment, there is no need for further testing for persistence assessment in remaining compartments.
Supporting information for biodegradation of the substance in sediment is available for the structural analogue O,O,O-tris(2(or 4)-C9-10-isoalkylphenyl) phosphorothioate (CAS 126019-82-7).
In the supporting study with the source substance, the biodegradation rates of the test substance in a water/sediment system and the identification of its biotransformation products and their distribution into water and sediment was investigated according to OECD guideline 308 under GLP conditions using radiolabeled test material (BASF 2021). Two different natural water/sediment systems were used differing in TOC content of the sediment (TS1: 0.2% and TS2: 2.3% AR). The test vessels were incubated in dark conditions at a temperature of 22.3 °C for 100 days. Whole system mineralization of the parent compound to carbon dioxide accounted for 0.2 – 0.3% TAR after 100 days incubation. Formation of organic or inorganic volatile were absent during the exposure. At the end of exposure very few radioactivity was found in water (TS 1: 0.4 - 0.5% TAR, TS 2: 0.1% TAR). The remaining radioactivity was found in sediment (TS1: 76.3%; TS2: 81.5%). NERs in sediment was dependent upon the TOC content of the sediment: TS1: 4.6% - 4.9% TAR and 4.4% - 8.0% TAR.
Half-life of the parent compound for both test systems were calculated and showed a very slow dissipation of the substance in TS 1 (DT50: 304d, total system; 434d, sediment) and TS 2 (DT50: 439d, total system; > 1000d, sediment).
Three minor metabolites were detected, two of them could be identified as tris(nonylphenyl)phosphate (RT = 24.1 min) and Nonylphenol (branched) (RT = 15.5 min) whereas it was not possible to identify the third metabolite (RT = 1.1 min). For tris(nonylphenyl)phosphate a maximum activity of 4.3% TAR (TS 2) was determined, for Nonylphenol (branched) a maximum activity of 4.0% (TS 2) was detected. The rest of the activity can be attributed to the parent compound. The biomass and the other physico-chemical parameters indicated that the condition inside the test systems were stable and the microbiology was active during the exposure time. No inhibition effect of test substance to microorganisms were found. Based on the half-life of O,O,O-tris(2(or 4)-C9-10-isoalkylphenyl) phosphorothioate in sediment and the total system, the registered substance as well as the test substance can be considered very persistent in the environment.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)