Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 274-126-1 | CAS number: 69808-32-8
Surface tension
Administrative data
Link to relevant study record(s)
- Endpoint:
- surface tension
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- From 28 NOVEMBER 2018 to 04 DECEMBER 2018
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.5 (Surface Tension)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 115 (Surface Tension of Aqueous Solutions)
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Type of method:
- plate method
- Key result
- Surface tension:
- ca. 72.66 mN/m
- Temp.:
- 19.9 °C
- Conc.:
- 0.49 mg/L
- Conclusions:
- The surface tension of an aqueous solution of 1-butyl-5-[(4-chlorophenyl)azo]-1,2-dihydro-
6-hydroxy-4-methyl-2-oxonicotinonitrile was determined as 72.66 ± 0.08 mN/m at 19.9 °C.
One measurement was performed for verification (after 60 minutes). No significant changes and thus no significant dependence on time were observed.
As these values were higher than 60 mN/m, 1-butyl-5-[(4-chlorophenyl)azo]-1,2-dihydro-6-
hydroxy-4-methyl-2-oxonicotinonitrile was classified as not surface active.
The surface tension of the negative control lay within the accepted range.
Reference
The surface tension of an aqueous solution of 1-butyl-5-[(4-chlorophenyl)azo]-1,2-dihydro-
6-hydroxy-4-methyl-2-oxonicotinonitrile was determined as 72.66 ± 0.08 mN/m at 19.9 °C.
One measurement was performed for verification (after 60 minutes). No significant changes and thus no significant dependence on time were observed.
Description of key information
The surface tension of an aqueous solution of 1-butyl-5-[(4-chlorophenyl)azo]-1,2-dihydro-6-hydroxy-4-methyl-2-oxonicotinonitrile was determined as 72.66 ± 0.08 mN/m at 19.9 °C.
One measurement was performed for verification (after 60 minutes). No significant changes and thus no significant dependence on time were observed.
As these values were higher than 60 mN/m, 1-butyl-5-[(4-chlorophenyl)azo]-1,2-dihydro-6-hydroxy-4-methyl-2-oxonicotinonitrile was classified as not surface active.
The surface tension of the negative control lay within the accepted range.
The concentration of the test item in the 90% saturated test solution was determined as 0.49 mg test item/L (based on analysis of dissolved organic carbon in the test solution).
The saturated solution was obtained from an aqueous solution prepared by shaking 1.00 g/L in water HPLC grade shaking for 24 hours at 19.2 – 20.5 °C in a closed flask at 150 rpm.
Key value for chemical safety assessment
- Surface tension:
- 72.66
- in mN/m at 20°C and concentration in mg/L:
- 19.9
Additional information
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
