3-butoxypropylamine

Genetic toxicity: in vitro

Administrative data

Endpoint:

in vitro gene mutation study in bacteria

Type of information:

experimental study

Adequacy of study:

key study

Study period:

13 February 2014 to 13 March 2014

Reliability:

1 (reliable without restriction)

Rationale for reliability incl. deficiencies:

guideline study

Data source

Reference

Reference Type:

study report

Title:

Unnamed

Year:

2014

Report date:

2014

Materials and methods

Test guideline

Qualifier:

according to guideline

Guideline:

OECD Guideline 471 (Bacterial Reverse Mutation Assay)

Deviations:

no

GLP compliance:

yes

Type of assay:

bacterial reverse mutation assay

Test material

Test material information

Constituent 1

Reference substance name:

3-butoxypropylamine

EC Number:

240-566-8

EC Name:

3-butoxypropylamine

Cas Number:

16499-88-0

Molecular formula:

C7H17NO

IUPAC Name:

3-butoxypropylamine

Specific details on test material used for the study:

SOURCE OF TEST MATERIAL
- Source and lot/batch No.of test material: 8291-11-20
- Expiration date of the lot/batch: 2014-07-13
- Purity test date: 2012-07-13

STABILITY AND STORAGE CONDITIONS OF TEST MATERIAL
- Storage condition of test material: 2 to 8ºC, protected from light

Method

Target gene:

Histidine locus (histidine-dependent Salmonella strains) and tryptophan locus (tryptophan-dependent E. coli strain)

Species / strain

Species / strain 1

Species / strain / cell type:

S. typhimurium TA 1535, TA 1537, TA 98 and TA 100

Additional strain / cell type characteristics:

not applicable

Species / strain 2

Species / strain / cell type:

E. coli WP2 uvr A

Additional strain / cell type characteristics:

not applicable

Metabolic activation:

with and without

Metabolic activation system:

Aroclor 1254-induced rat liver S9

Test concentrations with justification for top dose:

Initial Toxicity-Mutation Assay: 1.5, 5.0, 15, 50, 150, 500, 1500 and 5000 μg per plate with and without metabolic activation.
Confirmatory Mutagenicity Assay: 50, 150, 500, 1500 and 5000 μg per plate with and without metabolic activation.

Since the test item formed a clear solution in sterile water for injection at approx. 50 mg/mL, 5000 µg/plate was selected as the maximum concentration in the initial toxicity-mutation assay.
Based on the findings of the initial toxicity-mutation assay, the maximum dose plated in the confirmatory mutagenicity assay was 5000 μg per plate.

Vehicle / solvent:

- Vehicle(s)/solvent(s) used: water
- Justification for choice of solvent/vehicle: Sterile water for injection was selected as the solvent of choice based on the solubility of the test article and compatibility with the target cells. The test article formed a clear solution in sterile water for injection at approximately 50 mg/mL, the maximum concentration tested in the solubility test conducted at the laboratory

Controls

Controls 1

Untreated negative controls:

yes

Remarks:

solvent control

Negative solvent / vehicle controls:

yes

Remarks:

water

True negative controls:

no

Positive controls:

yes

Positive control substance:

other: 2-aminoanthracene

Remarks:

With S9: 1.0 μg/plate for TA98, TA1535 ; 2.0 μg/plate for TA100, TA1537; 15 μg/plate for WP2 uvrA

Controls 2

Untreated negative controls:

yes

Negative solvent / vehicle controls:

yes

True negative controls:

no

Positive controls:

yes

Positive control substance:

2-nitrofluorene

Remarks:

Without S9: 1.0 μg/plate for TA98

Controls 3

Untreated negative controls:

yes

Negative solvent / vehicle controls:

yes

True negative controls:

no

Positive controls:

yes

Positive control substance:

sodium azide

Remarks:

Without S9: 1.0 μg/plate for TA100, TA1535

Controls 4

Untreated negative controls:

yes

Negative solvent / vehicle controls:

yes

True negative controls:

no

Positive controls:

yes

Positive control substance:

9-aminoacridine

Remarks:

Without S9: 75 μg/plate for TA1537

Controls 5

Untreated negative controls:

yes

Negative solvent / vehicle controls:

yes

True negative controls:

no

Positive controls:

yes

Positive control substance:

methylmethanesulfonate

Remarks:

Without S9: 1.0 μg/plate for WP2 uvrA

Details on test system and experimental conditions:

METHOD OF APPLICATION: in agar (plate incorporation)
On the day of its use, minimal top agar, containing 0.8 % agar (W/V) and 0.5 % NaCl (W/V), was melted and supplemented with L-histidine, D-biotin and L-tryptophan solution to a final concentration of 50 μM each. Top agar not used with S9 or Sham mix was supplemented with 25 mL of water for each 100 mL of minimal top agar. For the preparation of media and reagents, all references to water imply sterile, deionized water. Bottom agar was Vogel-Bonner minimal medium E containing 1.5 % (W/V) agar. Nutrient bottom agar was Vogel-Bonner minimal medium E containing 1.5 % (W/V) agar and supplemented with 2.5 % (W/V) Oxoid Nutrient Broth No. 2 (dry powder). Nutrient Broth was Vogel-Bonner salt solution supplemented with 2.5 % (W/V) Oxoid Nutrient Broth No. 2 (dry powder).
Each plate was labeled with a code system that identified the test article, test phase, dose level, tester strain and activation. One-half (0.5) milliliter of S9 or Sham mix, 100 μL of tester strain (cells seeded) and 100 μL of vehicle or test article dilution were added to 2.0 mL of molten selective top agar at 45±2°C. After vortexing, the mixture was overlaid onto the surface of 25 mL of minimal bottom agar. When plating the positive controls, the test article aliquot was replaced by a 50 μL aliquot of appropriate positive control. After the overlay had solidified, the plates were inverted and incubated for 48 to 72 hours at 37±2°C. Plates that were not counted immediately following the incubation period were stored at 2-8°C until colony counting could be conducted.

DURATION
- Exposure duration: 48 to 72 hours
- Selection time (if incubation with a selection agent): 48 to 72 hours (simultaneous with exposure)

SELECTION AGENT (mutation assays): Histidine (S. typhimurium) or Tryptophan (E. coli)

NUMBER OF REPLICATIONS:
Initial toxicity-mutation assay: duplicate
Confirmatory mutagenicity assay: triplicate

DETERMINATION OF CYTOTOXICITY
- Method: reduction in the growth of the bacterial background lawn and/ reduction in the number of revertants

Evaluation criteria:

For the test article to be evaluated positive, it must cause a dose-related increase in the mean revertants per plate of at least one tester strain over a minimum of two increasing concentrations of test article.
Data sets for tester strains TA1535 and TA1537 were judged positive if the increase in mean revertants at the peak of the dose response was greater than or equal to 3.0-times the mean vehicle control value. Data sets for tester strains TA98, TA100 and WP2 uvrA were judged positive if the increase in mean revertants at the peak of the dose response was greater than or equal to 2.0-times the mean vehicle control value.
An equivocal response is a biologically relevant increase in a revertant count that partially meets the criteria for evaluation as positive. This could be a dose-responsive increase that does not achieve the respective threshold cited above or a non-dose responsive increase that is equal to or greater than the respective threshold cited. A response was evaluated as negative, if it was neither positive nor equivocal.

Statistics:

No formal hypothesis testing was done.
For each replicate plating, the mean and standard deviation of the number of revertants per plate were calculated and are reported.

Results and discussion

Test results

Test results 1

Species / strain:

S. typhimurium, other: TA98, TA100, TA1535, TA1537

Metabolic activation:

with and without

Genotoxicity:

negative

Cytotoxicity / choice of top concentrations:

no cytotoxicity

Vehicle controls validity:

valid

Untreated negative controls validity:

valid

Positive controls validity:

valid

Test results 2

Species / strain:

E. coli WP2 uvr A

Metabolic activation:

with and without

Genotoxicity:

negative

Cytotoxicity / choice of top concentrations:

no cytotoxicity

Vehicle controls validity:

valid

Untreated negative controls validity:

valid

Positive controls validity:

valid

Additional information on results:

TEST-SPECIFIC CONFOUNDING FACTORS
- Water solubility: Soluble at 50 mg/mL
- Precipitation: no precipitation has been observed
- Other: sterility results: No contaminant colonies were observed on the sterility plates for the vehicle control, the test article dilutions or the S9 and Sham mixes.

RANGE-FINDING/SCREENING STUDIES:
The initial toxicity-mutation assay was used to establish the dose-range for the confirmatory mutagenicity assay and to provide a preliminary mutagenicity evaluation. Vehicle control, positive controls and eight dose levels of the test article were plated, two plates per dose, with overnight cultures of TA98, TA100, TA1535, TA1537 and WP2 uvrA on selective minimal agar in the presence and absence of Aroclor-induced rat liver S9. Based on the findings of the initial toxicity-mutation assay, the maximum dose plated in the confirmatory mutagenicity assay was 5000 μg per plate.


HISTORICAL CONTROL DATA (with ranges, means and standard deviation and confidence interval (e.g. 95%)
- Positive historical control data: all positive controls exhibited at least 3-fold increases in the number of revertants
- Negative (solvent/vehicle) historical control data: the number of revertants was within the characteristic ranges for all vehicle controls
All criteria for a valid study were met as described in the protocol

Applicant's summary and conclusion

Conclusions:

Interpretation of results: negative with and without metabolic activation
The results of the Bacterial Reverse Mutation Assay indicate that, under the conditions of this study, the test item did not cause a positive mutagenic response with any of the tester strains in either the presence or absence of Aroclor-induced rat liver S9.