Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 213-924-6 | CAS number: 1067-12-5
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Endpoint summary
Administrative data
Description of key information
- Skin irritation / corrosion: not irritating [based on the results of a reliable OECD 439 in vitro study; GLP];
- Eye irritation: not irritating [based on the results of a reliable OECD 492 in vitro study; GLP]
- Respiratory irritation: no study available
Key value for chemical safety assessment
Skin irritation / corrosion
Link to relevant study records
- Endpoint:
- skin irritation: in vitro / ex vivo
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- Experimental phase: 2018-03-13 - 2018-04-27
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 439 (In Vitro Skin Irritation: Reconstructed Human Epidermis Test Method)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU Method B.46 (In Vitro Skin Irritation: Reconstructed Human Epidermis Model Test)
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Specific details on test material used for the study:
- Tris(hydroxymethyl)phosphine oxide (THPO) was applied as liquid test item topically undiluted to the model skin surface.
- Test system:
- human skin model
- Remarks:
- The EpiDermTM model
- Source species:
- human
- Cell type:
- non-transformed keratinocytes
- Cell source:
- foreskin from a single donor
- Justification for test system used:
- The principle of the reconstructed human epidermis model test is based on the premise that irritant substances are able to penetrate the stratum corneum by
diffusion and are cytotoxic to the cells in the underlying layers. Cell viability was measured by dehydrogenase conversion of the vital dye MTT (3-[4,5-
Dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide, Thiazolyl blue), into a blue formazan salt that was quantitatively measured after extraction from tissues.
Irritant substances were identified by their ability to decrease cell viability below defined threshold levels (i.e.≤ 50% for UN GHS Category 1 or Category 2).
The reconstructed human epidermis model system is suitable to test solids, liquids, semi-solids and waxes. The liquids may be aqueous or non-aqueous; solids may be soluble or insoluble in water. - Vehicle:
- unchanged (no vehicle)
- Details on test system:
- RECONSTRUCTED HUMAN EPIDERMIS (RHE) TISSUE
- Model used: EpiDermTM (EPI-200, Lot no. 25899) MatTek
- Tissue batch number(s): 00267
- Quality analysis date: 2018-04-25
TEMPERATURE USED FOR TEST SYSTEM
- Temperature used during treatment / exposure: 37 °C for 35 min., follwed by room temperture for 25 min.
- Temperature of post-treatment incubation (if applicable): 42 hour, temperature not specified
REMOVAL OF TEST MATERIAL AND CONTROLS
-Volume and number of washing steps: the test item was carefully washed from the skin surface with Dulbecco's phosphate buffered saline (D-PBS)
- Observable damage in the tissue due to washing: no
- Modifications to validated SOP: no
MTT DYE USED TO MEASURE TISSUE VIABILITY AFTER TREATMENT / EXPOSURE
- MTT concentration: 1 mg/mL
- Incubation time: 3 hours
- Spectrophotometer: Tecan Sunrise Magellan Version 7.2
- Wavelength: 540 nm
NUMBER OF REPLICATE TISSUES: 3
NUMBER OF INDEPENDENT TEST SEQUENCES / EXPERIMENTS TO DERIVE FINAL PREDICTION: 1 experiment with 2 measurements
PREDICTION MODEL / DECISION CRITERIA
- The test substance is considered to be irritant or corrosive to skin if the viability is less or equal than 50%
- The test substance is considered to be non-corrosive to skin if the viability is greater than 50% - Control samples:
- yes, concurrent vehicle
- yes, concurrent positive control
- yes, concurrent MTT non-specific colour control
- Amount/concentration applied:
- TEST MATERIAL
- Amount(s) applied (volume or weight with unit): 30 µL of test item
NEGATIVE CONTROL
- Amount(s) applied (volume or weight): 30 µL
- Concentration (if solution): D-PBS
POSITIVE CONTROL
- Amount(s) applied (volume or weight): 30 µL
- Concentration (if solution): 5% aqueous sodium dodecyl sulphate (SDS) - Duration of treatment / exposure:
- 60 minutes
- Duration of post-treatment incubation (if applicable):
- 42 hours
- Number of replicates:
- 3
- Irritation / corrosion parameter:
- % tissue viability
- Run / experiment:
- 1 , Mean viability (n=3), THPO
- Value:
- >= 54.7 - <= 61.5
- Vehicle controls validity:
- not applicable
- Negative controls validity:
- valid
- Positive controls validity:
- valid
- Remarks on result:
- no indication of irritation
- Remarks:
- mean viability: 57.8 %
- Other effects / acceptance of results:
- - OTHER EFFECTS:
- Visible damage on test system: no
- Direct-MTT reduction: no
- Colour interference with MTT: no
ACCEPTANCE OF RESULTS:
- Acceptance criteria met for negative control (vehicle): yes
- Acceptance criteria met for positive control: yes
- Acceptance criteria met for variability between replicate measurements: yes
- Range of historical values if different from the ones specified in the test guideline: see table 'any other information on materials and methods incl. tables' - Interpretation of results:
- other: EU GHS criteria not met
- Remarks:
- not irritant to skin
- Conclusions:
- - mean value of relative tissue viability was reduced to 57.8%
- test item is considered non-irritant to skin under the conditions of the test [since obtained value is above the threshold for skin irritation potential (50%)] - Executive summary:
The purpose of this study was to determine cytotoxic properties of Tris(hydroxymethyl)phosphine oxide (THPO) to skin cells, which might lead to irritation of human skin, by using an artificial three-dimensional model of human skin according to OECD Guideline 439 and in compliance with GLP criteria.The EpiDermTM model was employed.
Three tissues were used for each treatment and concurrent control groups. The optical density (OD) was determined by using the MTT reduction assay and expressed as relative percentage of viability of the negative control-treated tissues. THPO was applied to the model skin surface; D-PBS was used as the negative control and 5% aqueous sodium dodecyl sulphate (SDS) was used as the positive reference item. An exposure time of 60 minutes was employed followed by a 42-hour post-treatment incubation period in fresh medium.
The mean viability of cells exposed to THPO was 57.8 % of the negative controls and, hence, was well above the cut-off percentage cell viability value that distinguishes irritant from non-irritant test items of > 50%. THPO was considered to be non-cytotoxic and predicted to be non-irritant to skin.
All acceptance criteria required were fulfilled.
Under the present test conditions, THPO was non-cytotoxic and predicted to be non-irritant to skin in an experiment employing an artificial three-dimensional model of human skin. Hence, the test item did not show irritant properties and is therefore not classified as irritant (UN GHS no category).
Reference
Table 1 Summarized Results of in vitro Skin Irritation
Optical density [OD540] (n = 3) |
Mean Viability (n=3) [%] |
CV [%] |
|
D-PBS (negative control) |
1.320 | 100.0 | 5.2 |
DL-alpha-alanine | 1.217 | 92.2 | 5.6 |
5 % SDS (positive control) |
0.099 | 7.5 | 9.3 |
CV : coefficient of variation
SDS : sodium dodecyl sulphate
D-PBS : Dulbecco's phosphate buffered saline
Endpoint conclusion
- Endpoint conclusion:
- no adverse effect observed (not irritating)
Eye irritation
Link to relevant study records
- Endpoint:
- eye irritation: in vitro / ex vivo
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- Experimental phase: 2020-10-19 - 2020-10-22
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 492 (Reconstructed Human Cornea-like Epithelium (RhCE) Test Method for Identifying Chemicals Not Requiring Classification and Labelling for Eye Irritation or Serious Eye Damage)
- Version / remarks:
- OECD Guideline for the Testing of Chemicals, Part 492, adopted 18. Jun. 2019, “Reconstructed Human Cornea-like Epithelium (RhCE) test method for identifying chemicals not requiring classification and labelling for eye Irritation or serious eye damage”
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Species:
- human
- Strain:
- other: not applicable
- Details on test animals or tissues and environmental conditions:
- - Justification of the test method and considerations regarding applicability
The EpiOcularTM Eye Irritation Test (EIT) predicts the acute eye hazard potential of chemi-cals by measurement of tissue damage caused by cytotoxic effects in the reconstructed human cornea-like tissue model. Within a testing strategy, the EpiOcularTM EIT can be used as a replacement of the in vivo Draize Eye Irritation Test.
It is utilized for the classification and labelling of chemicals concerning their eye hazard potential. The EpiOcular™ EIT can be used to identify chemicals that do not require classification for eye irritation or serious eye damage according to the UN GHS classification system. A limitation of this guideline is that it neither allows discrimination between eye irritation/reversible effects on the eye (Category 2) and serious eye damage/irreversible effects on the eye (Category 1), nor between eye irritants (optional Category 2A) and mild eye irritants (optional Category 2B). For these purposes, further testing with other suitable test methods is required.
- Description of the cell system used, incl. certificate of authenticity and the mycoplasma status of the cell live
Specification:
Commercially available EpiOcularTM kit.
The EpiOcularTM tissue consists of normal, human-derived keratinocytes which have been cultured to form a stratified squamous epithelium similar to that found in the human cornea. It consists of highly organized basal cells. These cells are not transformed or transfected with genes to induce an extended life span. The EpiOcularTM tissues are cultured in specially prepared cell culture inserts with a porous membrane through which nutrients can pass to the cells. The tissue surface is 0.6 cm2.
Origin:
EpiOcularTM tissues were procured from MatTek In Vitro Life Science Laboratories, Slovakia.
Designation of the kit: OCL-212-EIT
Day of delivery: 20. Oct. 2020
Batch no.: 30681
The cells used to produce EpiOcular tissues are screened for potential biological contaminants. None of the following potential contaminants were detected:
HIV-1 virus (Oligonucleotide-directed amplification)
Hepatitis B virus (Oligonucleotide-directed amplification)
Hepatitis C virus (Oligonucleotide-directed amplification)
Bacteria, yeast, other fungi (long-term antibiotic, antimycotic free culture) - Vehicle:
- unchanged (no vehicle)
- Controls:
- yes, concurrent positive control
- yes, concurrent negative control
- Amount / concentration applied:
- TEST MATERIAL
- Amount(s) applied (volume or weight with unit): 50µL / tissue
- Concentration (if solution): undiluted
VEHICLE
none - Duration of treatment / exposure:
- 28 minutes
- Observation period (in vivo):
- n/a
- Duration of post- treatment incubation (in vitro):
- 120 minutes
- Number of animals or in vitro replicates:
- 2
- Details on study design:
- - RhCE tissue construct used, including batch number
Commercially available EpiOcularTM kit.
The EpiOcularTM tissue consists of normal, human-derived keratinocytes which have been cultured to form a stratified squamous epithelium similar to that found in the human cornea. It consists of highly organized basal cells. These cells are not transformed or transfected with genes to induce an extended life span. The EpiOcularTM tissues are cultured in specially prepared cell culture inserts with a porous membrane through which nutrients can pass to the cells. The tissue surface is 0.6 cm2.
EpiOcularTM tissues were procured from MatTek In Vitro Life Science Laboratories, Slovakia.
Designation of the kit: OCL-212-EIT
Day of delivery: 20. Oct. 2020
Batch no.: 30681
- Doses of test chemical and control substances used
Test chemical: 50 µg/tissue
Controls: 50 µL
- Duration and temperature of exposure, post-exposure immersion and post-exposure incubation periods (where applicable)
After overnight incubation, the tissues were pre-wetted with 20 µL DPBS buffer and the tissues were incubated at 37 ± 1 °C, 5 ± 1 % CO2 and ≥ 95% relative humidity for 30 minutes. After that, 50 µL of the controls and the test item were applied in duplicate in one-minute-intervals. This was done in such a fashion that the upper surface of the tissue was covered.
At the beginning of each experiment (application of negative controls), a stop watch was started. After dosing the last tissue, all plates were transferred into the incubator for 28 minutes at 37 ± 1 °C, 5 ± 1 % CO2 and ≥ 95% relative humidity.
At the end of exposure time, the inserts were removed from the plates in one-minute-intervals using sterile forceps and rinsed immediately. The inserts were thoroughly rinsed with DPBS. Then, the tissues were immediately transferred to and immersed in 5 mL of pre-warmed assay medium in a pre-labelled 12-well plate for 12 minutes post soak at room temperature.
After that, each insert was removed from the medium, the medium was decanted off the tissue and the insert was blotted on absorbent material and transferred into the respective well of a pre-labelled 6-well plate containing 1 mL assay medium. For post-treatment incu-bation, the tissues were incubated for 120 minutes at 37 ± 1 °C, 5 ± 1% CO2 and ≥ 95% relative humidity.
After the post-treatment incubation, the MTT assay was performed.
- Indication of controls used for direct MTT-reducers and/or colouring test chemicals (if applicable)
- Number of tissue replicates used per test chemical and controls (positive control, negative control, NSMTT, NSCliving and NSCkilled, if applicable)
2
- Wavelength and band pass (if applicable) used for quantifying MTT formazan, and linearity range of measuring device (e.g. spectrophotometer)
Spectrophotometer, 570 nm
- Description of the method used to quantify MTT formazan
MTT Assay and Extraction
A 24-well-plate was prepared with 300 µL freshly prepared MTT solution in each well. The tissue inserts were blotted on absorbent material and then transferred into the MTT solution. The plate was incubated for 180 minutes at 37 ± 1 °C, 5 ± 1 % CO2 and ≥ 95% relative humidity.
At last, each insert was thoroughly dried and set into a pre-labelled 6-well-plate, containing 2 mL isopropanol, taking care that no isopropanol was flowing into the tissue insert. The plate was firmly sealed to avoid evaporation of the solvent and then shaken for 2 hours at room temperature, protected from light.
Measurement
The inserts were removed from the 6-well plate and discarded. The content of each well was thoroughly mixed in order to achieve homogenisation.
From each well, two replicates with 200 µL solution (each) were pipetted into a 96-well-plate. Eight wells with 200 µL isopropanol were pipetted also. The plate was read in a plate spectrophotometer at 570 nm.
- Description of evaluation criteria used including the justification for the selection of the cut-off point for the prediction model
OD value; > 60% of control
- Reference to historical positive and negative control results demonstrating suitable run acceptance criteria
Parameter Optical Density Negative Control Relative Tissue Viability Positive Control
Demineralised H2O Methyl acetate
Exposure time 30 minutes 30 minutes
Mean 1.888 32.6%
Standard deviation 0.260 7.2%
Range 1.167 - 2.437 12 - 57%
Current study 1.932 29.1%
- Complete supporting information for the specific RhCE tissue construct used
- Reference to historical data of the RhCE tissue construct
- Demonstration of proficiency in performing the test method before routine use by testing of the proficiency chemicals
The validity of the EpiOcularTM test at the laboratory was demonstrated in a proficiency study. For this purpose 15 proficiency chemicals (indicated by the OECD 492 guideline) were tested. All of the 15 proficiency chemicals were correctly categorized. Therefore, the proficiency of the EpiOcularTM test was demonstrated.
- Positive and negative control means and acceptance ranges based on historical data
Yes
- Acceptable variability between tissue replicates for positive and negative controls
< 20%
- Acceptable variability between tissue replicates for the test chemical
< 20% - Irritation parameter:
- other: % tissue viability
- Run / experiment:
- mean test item
- Value:
- 90.9
- Vehicle controls validity:
- not applicable
- Negative controls validity:
- valid
- Positive controls validity:
- valid
- Irritation parameter:
- other: % tissue viability
- Run / experiment:
- mean positive control
- Value:
- 29.1
- Vehicle controls validity:
- not applicable
- Negative controls validity:
- valid
- Positive controls validity:
- not examined
- Other effects / acceptance of results:
- OTHER EFFECTS:
- Visible damage on test system: none stated
DEMONSTRATION OF TECHNICAL PROFICIENCY: yes
ACCEPTANCE OF RESULTS:
- Acceptance criteria met for negative control: yes
- Acceptance criteria met for positive control: yes
- Range of historical values if different from the ones specified in the test guideline: not different - Interpretation of results:
- other: EU-GHS criteria not met
- Conclusions:
- - mean value of relative tissue viability was 90.9 %
- test item is considered non-eye irritant under the conditions of the test [since the value is well above the threshold for eye irritation potential (≤ 60%)] - Executive summary:
The study was conducted under GLP according to OECD guideline 492 on the registration substance Tris(hydroxymethyl)phosphine oxide (THPO). The method is to be considered scientifically reasonable with no deficiencies in documentation or any deviations, the validity criteria are fulfilled, positive and negative controls gave the appropriate response. Hence, the results can be considered as reliable to assess the irritation / corrosion potential of the test substance to the eye in vitro.
One valid experiment was performed. The test item THPO was applied to a three-dimensional human cornea tissue model in duplicate for an exposure time of 28 minutes. 50 µL of the liquid test item was applied to two tissue replicates.
After treatment, the respective substance was rinsed from the tissue; then, cell viability of the tissues was evaluated by addition of MTT, which can be reduced to formazan. The formazan production was evaluated by measuring the optical density (OD) of the resulting solution.
Demineralised water was used as negative control and methyl acetate was used as positive control.
The controls showed the following results: After treatment with the negative control, the absorbance values were within the required acceptability criterion of mean OD > 0.8 and < 2.8, OD was 1.9. The positive control showed clear eye irritating effects, the mean value of the relative tissue viability was 29.1% (< 50%).
The variation within tissue replicates of the controls and the test item was acceptable (< 20%).
After treatment with the test item, the mean value of relative tissue viability was 90.9%.
This value is above the threshold for eye irritation potential (≤ 60%). Test items that induce values above the threshold are considered non-eye irritant.
Under the conditions of the test, THPO is considered non-eye irritant in the EpiOcularTMEye Irritation Test.
Reference
1) Findings and Results
a) Measured Values
As blank, the optical density of isopropanol was measured in eight wells of the 96-well-plate. The measured values and their mean are given in the following table:
Table: Absorbance Values Blank Isopropanol (OD at 570 nm)
Replicate |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
Mean |
Absorbance |
0.033 |
0.033 |
0.033 |
0.034 |
0.033 |
0.034 |
0.034 |
0.035 |
0.034 |
The absorbance values of negative control, test item and positive control are given in the following table:
Table: Absorbance Values Negative Control, Positive Control and Test Item (OD at 570 nm)
Designation |
Measurement |
Negative Control |
Positive Control |
Test item |
Tissue 1 |
1 |
1.925 |
0.610 |
1.801 |
2 |
1.892 |
0.600 |
1.794 |
|
Tissue 2 |
1 |
2.018 |
0.586 |
1.784 |
2 |
2.027 |
0.586 |
1.778 |
From the measured absorbances, the mean of each tissue was calculated, subtracting the mean absorbance of isopropanol as given in the table below (= corrected values).
Table: Mean Absorbance Negative Control, Positive Control and Test Item
Designation |
Negative Control |
Positive Control |
Test item |
Mean – blank (Tissue 1) |
1.875 |
0.571 |
1.764 |
Mean – blank (Tissue 2) |
1.989 |
0.552 |
1.747 |
b) Comparison of Tissue Viability
For the test item and the positive control, the following percentage values of tissue viability were calculated in comparison to the negative control:
Table: % Viability Positive Control and Test Item
Designation |
Positive Control |
Test item |
% Viability (Tissue 1) |
29.6% |
91.3% |
% Viability (Tissue 2) |
28.6% |
90.4% |
% Viability Mean |
29.1% |
90.9% |
c) Assessment
Eye hazard potential is assessed using the criteria given in the following table:
Table: Assessment of Eye Hazard Potential
% Viability |
Assessment |
UN GHS classification |
> 60 % |
Non eye irritant |
No Category |
≤ 60 % |
At least eye irritant |
No prediction can be made (category 1 or 2) |
d) Validity
Validity criteria and results are stated in the following table:
Table: Validity
Criterion |
Demanded |
Found |
Mean OD of negative control |
> 0.8 and < 2.8 |
1.9 |
% mean relative viability of positive control |
< 50% of negative control |
29.1% |
Variation within replicates |
< 20% |
5.9% (negative control) |
Values for negative control and for positive control were within the range of historical data of the test facility.
Therefore, the experiment is considered valid.
2) Discussion
One valid experiment was performed. Under the conditions of the test,THPO, Tris(hydroxymethyl)phosphine oxideis considered non-eye irritant in the EpiOcularTMEye Irritation Test.
After treatment with the test item, the mean value of relative tissue viability was reduced to 90.9%. This value is below the threshold for eye irritation potential (≤ 60%).
All validity criteria were met. The criterion for optical density of the negative control was fulfilled: The OD value was 1.9 (> 0.8 and < 2.8).
The positive control induced a decrease in tissue viability as compared to the negative control to 29.1%.
The variation within the replicates of the controls and the test item was acceptable (< 20%).
For these reasons, the result of the test is considered valid.
Endpoint conclusion
- Endpoint conclusion:
- no adverse effect observed (not irritating)
Respiratory irritation
Endpoint conclusion
- Endpoint conclusion:
- no study available
Additional information
Skin Irritation in vitro
A study was performed to investigate the potential of the test material Tris(hydroxymethyl)phosphine oxide (THPO) to cause dermal irritation in accordance with the standardised guideline OECD 439 under GLP conditions. The EpiDermTMmodel was employed.
The study was awarded a reliability score of 1 in accordance with the criteria set forth by Klimisch et al. (1997).
Three tissues were used for each treatment and concurrent control groups. The optical density (OD) was determined by using the MTT reduction assay and expressed as relative percentage of viability of the negative control-treated tissues. THPO was applied to the model skin surface; D-PBS was used as the negative control and 5% aqueous sodium dodecyl sulphate (SDS) was used as the positive reference item. An exposure time of 60 minutes was employed followed by a 42-hour post-treatment incubation period in fresh medium.
The mean viability of cells exposed to THPO was 57.8 % of the negative controls and, hence, was well above the cut-off percentage cell viability value that distinguishes irritant from non-irritant test items of > 50%. THPO was considered to be non-cytotoxic and predicted to be non-irritant to skin.
All acceptance criteria required were fulfilled.
Under the present test conditions, THPO was non-cytotoxic and predicted to be non-irritant to skin in an experiment employing an artificial three-dimensional model of human skin. Hence, the test item did not show irritant properties and is therefore not classified as irritant (UN GHS no category).
Eye Irritation in vitro
A study was conducted to investigate the potential of the test material Tris(hydroxymethyl)phosphine oxide (THPO) to cause eye irritation in accordance with the standardised guideline OECD 492 under GLP conditions. The study was awarded a reliability score of 1 in accordance with the criteria set forth by Klimisch et al. (1997).
The test item THPO was applied to a three-dimensional human cornea tissue model in duplicate for an exposure time of 28 minutes. 50 µL of the liquid test item was applied to two tissue replicates.
After treatment, the respective substance was rinsed from the tissue; then, cell viability of the tissues was evaluated by addition of MTT, which can be reduced to formazan. The formazan production was evaluated by measuring the optical density (OD) of the resulting solution.
Demineralised water was used as negative control and methyl acetate was used as positive control.
The controls showed the following results: After treatment with the negative control, the absorbance values were within the required acceptability criterion of mean OD > 0.8 and < 2.8, OD was 1.9. The positive control showed clear eye irritating effects, the mean value of the relative tissue viability was 29.1% (< 50%).
The variation within tissue replicates of the controls and the test item was acceptable (< 20%).
After treatment with the test item, the mean value of relative tissue viability was 90.9%.
This value is above the threshold for eye irritation potential (≤ 60%). Test items that induce values above the threshold are considered non-eye irritant.
Under the conditions of the test, THPO is considered non-eye irritant in the EpiOcularTM Eye Irritation Test.
No prediction concerning irritant or severely irritant potential of the test item Tris(hydroxymethyl)phosphine oxide (THPO) could be made with a GLP compliant in vitro Bovine Corneal Opacity and Permeability Assay (BCOP) according to OECD Guideline 437, which was conducted prior to the OECD 492 study.
Three corneas were used for each treatment group (test item, negative control and positive control). The liquid test item THPO was used undiluted as recommended in the test guideline OECD 437.
0.9 % NaCl solution was used as the negative control and 1 % NaOH in water (highly purified water) as the positive control item.
The test item and the controls were applied to the epithelial surface of the cornea by addition to the anterior chamber of the corneal holder. The exposure time for the test item and the controls was 10 minutes. The optical density (OD) was measured at a wavelength of 490 nm. The acceptance criteria of validity were fulfilled in this test.
Following treatment with THPO a mean opacity value of 1.354 ± 0.928 and a mean permeability value of 0.292 ± 0.014 compared to the negative control were determined. The calculated IVIS of 5.739 ±1.124 is above the cut-off value of 3 (UN GHS no category) and below the cut-off value of 55, identifying test substances as inducing serious eye damage (UN GHS Category 1). Consequently no prediction concerning irritant or severely irritant potential of the test item could be made with this study.
However, the very low IVIS result achieved [that is only just above the cut-off value of 3 (UN GHS no category) and far below the cut-off value of 55 (UN GHS Category 1)] supports the result of the OECD 492 guideline study.
Skin / Eye Irritation in vivo
In vivo irritation studies do not need to be conducted because the available in vitro data are adequate for classification and risk assessment.
Justification for classification or non-classification
Based on results of reliable in vitro studies, the substance Tris(hydroxymethyl)phosphine oxide (THPO) does not meet the CLP classification criteria with respect to irritation or corrosion to the skin and eye, as set out in Regulation (EC) No. 1272/2008.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.