Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 813-050-0 | CAS number: -
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://echa.europa.eu/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_physical-and-chemical-properties.png)
Vapour pressure
Administrative data
Link to relevant study record(s)
- Endpoint:
- vapour pressure
- Type of information:
- (Q)SAR
- Adequacy of study:
- key study
- Study period:
- 2018-03-08
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- results derived from a valid (Q)SAR model and falling into its applicability domain, with adequate and reliable documentation / justification
- Justification for type of information:
- 1. SOFTWARE
EPIWIN software by US-EPA
2. MODEL (incl. version number)
MPBPWIN v1.43
3. SMILES OR OTHER IDENTIFIERS USED AS INPUT FOR THE MODEL
c1(C)c(N=C(=O))c(CC)c(N=C(=O))c(CC)c1
4. SCIENTIFIC VALIDITY OF THE (Q)SAR MODEL
- The complete test sets of experimental data for (melting point, boiling point and) vapour pressure can be downloaded via the Internet at: http://esc.syrres.com/interkow/EpiSuiteData.htm
5. APPLICABILITY DOMAIN
Estimation accuracy: The accuracy of MPBPWIN's "suggested" VP estimate was tested on a dataset of 3037 compounds with known, experimental VP values between 15 and 30 deg C (the vast majority at 25 or 20 deg C). The experimental values were taken from the PHYSPROP Database that is part of the EPI Suite. For this test, the CAS numbers were run through MPBPWIN as a standard batch-mode run (using the default VP estimation temperature of 25 deg C) and the batch estimates were compared to PHYSPROP's experimental VP. The plot clearly indicates that the estimation error increases as the vapour pressure (both experimental and estimated) decreases, especially when the vapour pressure decreases below 1x10-6 mm Hg (0.0001333 Pa).
The estimation methodology uses the normal boil point to estimate the liquid-phase vapour pressure. For solids, the melting point is required to convert the liquid-phase vapour pressure to the solid-phase vapour pressure. VP estimation error can be introduced by:
(1) poor Boiling Point estimates or values
(2) poor Melting Point estimates or values (for solids)
The 3037 compound test set contains 1642 compounds with available experimental Boiling points and Melting points. For this subset of compounds, the estimation accuracy statistics are (based on log VP):
number = 1642
r2 = 0.949
std deviation = 0.59
avg deviation = 0.32
These statistics clearly indicate that VP estimates are more accurate with experimental BP and MP data.
Estimation domain: The intended application domain is organic chemicals. Inorganic and organometallic chemicals generally are outside the domain.
Currently there is no universally accepted definition of model domain. However, users may wish to consider the possibility that property estimates are less accurate for compounds outside the Molecular Weight range of the training set compounds, and/or that have more instances of a given fragment than the maximum for all training set compounds. It is also possible that a compound may have a functional group(s) or other structural features not represented in the training set, and for which no fragment coefficient was developed. These points should be taken into consideration when interpreting model results.
The complete training sets for MPBPWIN's estimation methodology are not available. Therefore, describing a precise estimation domain for this methodology is not possible. The current applicability of the MPBPWIN methodology is best described by its accuracy in predicting vapour pressure as described above in the accuracy section.
6. ADEQUACY OF THE RESULT
The result calculated for the organic substance 3,5-Diethyltoluene-2,4-diisocyanate seems reasonable. The model allows entering both experimental melting and boiling point to increase accuracy. So, the experimentally determined melting point of 17.9°C was entered, but disregarded by the model as it is not used for liquids. Only the experimentally determined boiling point is relevant. DETDI has a boiling range from at 272 - 289 °C at atmospheric pressure as determined by differential scanning calorimetry. Consequently, vapour pressure was estimated using both the upper and lower value to cover both extremes, which results in a range of the vapour pressure itself. As the boiling point is rather high, it is clearly indicated that the estimated vapour pressure does not underestimate a potential hazard via inhalation, so estimation of the vapour pressure is considered adequate.
The estimated vapour pressure using the lower boiling point of 272°C is 1.1 Pa, using a boiling point of 289°C, the resulting vapour pressure is 0.466 Pa at 25°C. Taking into account the magnitude of the vapour pressure result it is considered that both boiling points would reveal a result clearly indicating that DETDI is not volatile. - Guideline:
- other: REACH guidance on QSARs Chapter R.6
- Version / remarks:
- May 2008
- GLP compliance:
- no
- Remarks:
- (not applicable)
- Type of method:
- other: QSAR calculation
- Key result
- Temp.:
- 25 °C
- Vapour pressure:
- >= 0.466 - <= 1.1 Pa
- Remarks on result:
- other: Mean of Antoine & Grain methods
- Remarks:
- boundary values estimated using both extremes of the experimentally determined boiling point range of 272-289°C
- Temp.:
- 25 °C
- Vapour pressure:
- >= 0.394 - <= 1.07 Pa
- Remarks on result:
- other: Antoine Method
- Remarks:
- boundary values estimated using both extremes of the experimentally determined boiling point range of 272-289°C
- Temp.:
- 25 °C
- Vapour pressure:
- >= 0.466 - <= 1.14 Pa
- Remarks on result:
- other: Modified Grain Method
- Remarks:
- boundary values estimated using both extremes of the experimentally determined boiling point range of 272-289°C
- Temp.:
- 25 °C
- Vapour pressure:
- >= 0.868 - <= 2.07 Pa
- Remarks on result:
- other: Mackay Method
- Remarks:
- boundary values estimated using both extremes of the experimentally determined boiling point range of 272-289°C
- Conclusions:
- The study report describes a scientifically accepted calculation method for the vapour pressure using the US-EPA software MPBPWIN v1.43. No GLP criteria are applicable for the usage of this tool and the QSAR estimation is easily repeatable. The result is adequate for the regulatory purpose.
The calculation resulted in a value of 0.466-1.1 Pa at 25 °C. - Executive summary:
The vapour pressure of DETDI was determined by the computer program MPBPWIN v1.43 (EPIWIN software) by US-EPA (2012). The program calculates the vapour pressure according to three different methods: Antoine, Modified Grain and Mackay. The Modified Grain method is preferentially adopted and therefore the most important one [Lyman, W.J., 1985. In: Environmental Exposure From Chemicals. Volume I., Neely, W.B. and Blau, G.E. (eds), Boca Raton, FL: CRC Press, Inc., Chapter 2]. The experimentally determined boiling point range of 272 - 289 °C is used, and an ambient temperature of 25 °C is assumed. The Antoine Method gives a result of 0.394-1.07 Pa, the Mackay Method results in a value of 0.868-2.07 Pa and according to the Modified Grain Method the substance has a vapour pressure of 0,466-1.14 Pa, which results in a mean of Mean of Antoine & Grain methods of 0.466-1.1 Pa at 25°C.
Reference
Description of key information
Since the result of the experimental study according to OECD TG 104 was deemend unreliable due to methodological defficiencies, the vapour pressure was estimated by calculation, using the US-EPA software MPBPWIN v1.43.
The calculation resulted in a value of 0.466-1.1 Pa at 25 °C.
Key value for chemical safety assessment
Additional information
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)