Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: - | CAS number: -
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://echa.europa.eu/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_environmental-fate-and-pathways.png)
Hydrolysis
Administrative data
Link to relevant study record(s)
- Endpoint:
- hydrolysis
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 111 (Hydrolysis as a Function of pH)
- Qualifier:
- according to guideline
- Guideline:
- EU Method C.7 (Degradation: Abiotic Degradation: Hydrolysis as a Function of pH)
- Version / remarks:
- adopted, May 2008
- GLP compliance:
- yes (incl. QA statement)
- Radiolabelling:
- no
- Analytical monitoring:
- yes
- Details on sampling:
- The substance as an NLP contains different molecular weight fractions ( = NLP-fraction) which behave different in hydrolysis reaction. The hydrolysis rate constants and the half-life times at 25 °C and at pH 7 and pH 9 were calculated for six main NLP-fractions representing 96 % of the test item.
Only the main NLP-fractions representing 96 % of the test item were investigated in detail. - Buffers:
- - Buffer pH 4: C6H8O7 / NaOH / NaCl, Riedel de Haen, Art.-No.: 33643
- Buffer pH 7: KH2PO4 / Na2HPO4, Fluka, Art.-No.: 33646
- Buffer pH 9: Na3BO3 · 10 H2O / hydrochloric acid, Riedel de Haën, Art.-No.: 33648 - Estimation method (if used):
- Arrhenius equation: to calculate the rate constants at other temperatures, when the rate constants are known for two or more temperatures (Further hydrolysis tests were conducted at 20 ° and 70 °C beside 50 °C).
- Details on test conditions:
- - Calibration:
Because the test item is an NLP and no standard compounds were available for the different fractions the test item was used as standard compound calculated with a stipulated overall content of 100 %. The calibration was only used to check the system suitability and to evaluate
the total water solubility. The hydrolysis tests itself were analyzed using the peak area and the total peak area of the fractions
- Preparation of the calibration stock solution:
Approx. 0.37 g of the test item were weighed into a 100 mL volumetric flask and dissolved and diluted to volume with acetonitrile (resulting concentration: approx. 3.7 g/l).
- Preparation of the calibration solutions:
Using the stock solution dilutions with acetonitrile were prepared to obtain six calibration solutions with concentrations between approx. 0.11 g /l and 1.84 g/l.
- Calculation:
The calibration was done by external standardization using the test item as standard compound. Because the test item is an NLP, the chromatogram shows several peaks. To calculate the response factor of the main NLP-fractions the initial weight of the test item in the standard solution was divided according the area-% share of the peaks determined in the corresponding calibration chromatogram. - Duration:
- 5 d
- pH:
- 4
- Temp.:
- 50
- Initial conc. measured:
- 1.23 g/L
- Duration:
- 30 d
- pH:
- 7
- Temp.:
- 20
- Initial conc. measured:
- 1.15 g/L
- Duration:
- 30 d
- pH:
- 7
- Temp.:
- 50
- Initial conc. measured:
- 1.29 g/L
- Duration:
- 15 d
- pH:
- 7
- Temp.:
- 70
- Initial conc. measured:
- 1.28 g/L
- Duration:
- 30 d
- pH:
- 9
- Temp.:
- 20
- Initial conc. measured:
- 1.26 g/L
- Duration:
- 15 d
- pH:
- 9
- Temp.:
- 50
- Initial conc. measured:
- 1.22 g/L
- Duration:
- 15 d
- pH:
- 9
- Temp.:
- 50
- Initial conc. measured:
- 1.21 g/L
- Duration:
- 4 d
- pH:
- 9
- Temp.:
- 70
- Initial conc. measured:
- 1.27 g/L
- Number of replicates:
- 1 replicate at pH 9
- Preliminary study:
- Prior to hydrolysis test a few experimental tests had to be done to define the solubility and the test concentration, an organic solvent additive if required, the analytical method and the test strategy. The preliminary test was performed at 50 ± 0.5 °C and pH 4.0, 7.0 and 9.0.
- Tier 1 (pH 4, 50 °C):
The test item was called to be stable at 50 °C at pH 4 and no half-life time and hydrolysis rate were calculated. Because no degradation was observed, no sterility test was performed in this case. Therefore no further tests at other temperatures were required for pH 4.
- Tier 1 (pH7 and 9, 50 °C):
The overall degradation of the test item observed at 50 °C at pH 7 after 5 days (120 h) was greater than 10 %. Therefore the pretest was extended. After 30 days (720 h) a degradation of approx. 45 % was observed and the hydrolysis test aborted. Even the overall degradation of the test item observed at 50 °C and pH 9 after 5 days (120 h) was greater than 10 %, too. Therefore the pretest was extended. After 7 days (170 h) a degradation of greater than 90 % was observed. The hydrolysis test was aborted after 15 days (360 h).
Sterility test were in compliance and showed no microbes (colonies). Therefore biotic degradation could be excluded. Further hydrolysis tests at 20 °C and 70 °C had to be performed in the second tier for pH 7 and 9. - Test performance:
- The main test (second tier) was performed at pH 7 and 9 at 20 °C and 70 °C, values at which the test substance was found to be unstable as defined by the preliminary test above. The overall degradation of the test item observed at 20 °C and pH 9 after 30 days (720 h) was approx. 32 % and the overall degradation of the test item at 70 °C and pH 9 after 1 day (approx. 22 h) was 90 %. Both hydrolysis tests were aborted. A sterility test was in compliance and showed no microbes (colonies). Therefore biotic degradation could be excluded.
Test Conditions:
- 0.01 mol/l-solution of the test item according to OECD Guideline 111 (approx. 3.7 g/l) the solubility in different solvents and buffers was tested by visual investigation
- 0.01 mol/L aqueous solution was turbid, therefore the content of the test item in this aqueous solution was analyzed to estimated the solubility of the test item in water
- a half-saturated solution according to OECD-guideline was prepared (approx. 1.2 g/l), which was slightly turbid again
- the solution was filtered to get a clear solution
- the residue was determined gravimetrically to determine the amount of the precipitation - Transformation products:
- not specified
- Remarks:
- Mass spectral data for transformation products are only available at pH 9 and could usually not be identified unambiguously.
- Details on hydrolysis and appearance of transformation product(s):
- - to avoid a 30 % content of organic solvent additive and although the 0.01 mol/L aqueous solution was turbid, the hydrolysis study was only performed with the soluble parts of the test item after filtration.
- aqueous solutions without organic solvent additive, concentration: approx. 1.2 g/l (approx. 3.3·10-3 mol/l)
- because the test item is an NLP containing different molecular weight fractions which probably behave different the NLP-fractions and the different peaks observed were investigated separately
- the overall hydrolysis was investigated using the total peak area of the main starting peaks which represent main NLP-fractions - % Recovery:
- > 90
- pH:
- 4
- Temp.:
- 50 °C
- Duration:
- 5 d
- % Recovery:
- > 90
- pH:
- 7
- Temp.:
- 20 °C
- Duration:
- 30 d
- % Recovery:
- ca. 45
- pH:
- 7
- Temp.:
- 50 °C
- Duration:
- 30 d
- % Recovery:
- 10
- pH:
- 7
- Temp.:
- 70 °C
- Duration:
- 15 d
- % Recovery:
- 68
- pH:
- 9
- Temp.:
- 20 °C
- Duration:
- 30 d
- % Recovery:
- 6.3 - 6.8
- pH:
- 9
- Temp.:
- 50 °C
- Duration:
- 15 d
- % Recovery:
- ca. 10
- pH:
- 9
- Temp.:
- 70 °C
- Duration:
- 22 h
- pH:
- 4
- Temp.:
- 25 °C
- DT50:
- > 1 yr
- Remarks on result:
- other: The overall degradation of the test item observed at 50 °C at pH 4 after 5 days (120 h) is lower than 10 %. Therefore it can be assumed that the test item is also stable at 25 °C and no half-life time and hydrolysis rate were calculated.
- pH:
- 7
- Temp.:
- 25 °C
- DT50:
- 573 d
- Type:
- (pseudo-)first order (= half-life)
- Remarks on result:
- other: Hydrolysis rate constant k [s-1]: 1.60 · 10E-8
- pH:
- 9
- Temp.:
- 25 °C
- DT50:
- 15 d
- Type:
- (pseudo-)first order (= half-life)
- Remarks on result:
- other: Hydrolysis rate constant k [s-1]: 6.38 · 10E-7
- Details on results:
- At pH 9 insolube parts of 2.5 and 3.2 % parts were determined at 50 °C and of 2.2 % at 70 °C.
- Validity criteria fulfilled:
- yes
- Remarks:
- A plate count tests according to prEN ISO 7218 (2005) was performed at the end of the tests. No microbes (colonies) were detected. Therefore biotic degradation could be excluded.
- Conclusions:
- The recovery and the repeatability were checked during the hydrolysis study by analyzing a solution of the test item in acetonitrile on every day of application (system suitability test). The recovery was between 90 % und 110 % and met the requirements of OECD 111. The method was sensitive enough to determine hydrolysis rates of greater than 90 %. The results of both hydrolysis tests at pH = 9 and 50 °C were identical. This demonstrates that the method and the procedure worked reproducible.
- Executive summary:
The stability of the substance was determined according to the OECD guideline 111 and the EU method, C.7 (Currenta, 2009). Based on kinetic parameters, the following dissipation half-lives for a temparature of 25 °C were extrapolated based on the Arrhenius equation:
pH 4 (25 °C): > 1 year
pH 7 (25 °C): 573 days
pH 9 (25 °C): 15 days.
Reference
Hydrolysis was observed and calculated using the peak area of the different peaks and the total peak area of the main starting peaks which represent the main NLP-fractions. The peak identification (identification of NLP-fractions and hydrolysis products) were done by interpretation of HPLC-MS mass spectra. Chromatograms from the start and the end of the hydrolysis tests at pH = 9 were analyzed in positive and negative ionization mode. The test item is an NLP containing different molecular weight fractions (= NLP-fraction) which were not individually identified. The chemical composition of the starting material exists mainly of 2-benzofuran-1,3-dione, addition product with 2-(2-hydroxyethoxy)ethanol, ethoxylated. The NLP consists of molecules having different chain lengths even at the different carboxylic acid groups within the same molecule. A hydrolysis reaction of an NLP is very complex. The NLP molecules having different chain lengths may hydrolyse following different reaction kinetics. Shorter chain molecules could be already part of the NLP and could also be newly built by hydrolysis of longer chain molecules. These shorter chains may hydrolyse also. All these effects were observed during the hydrolysis of the test item.
Description of key information
The stability of the substance was determined according to the OECD guideline 111 and the EU method, C. 7 (Currenta, 2009). Based on kinetic parameters, the following dissipation half-lives for a temperature of 25 °C were extrapolated based on the Arrhenius equation:
pH 4 (25 °C): > 1 year
pH 7 (25 °C): 573 days
pH 9 (25 °C): 15 days.
Key value for chemical safety assessment
- Half-life for hydrolysis:
- 573 d
- at the temperature of:
- 25 °C
Additional information
The hydrolysis behaviour of the substance was assessed in a study conducted to a high standard, in full compliance with all three tiers of the OECD guideline 111 and the EU method C.7. The kinetic parameters were followed using a HPLC/UV method. As the substance is a NLP containing different molecular weight fractions (= NLP-fraction) which were not completely individually identified, half-life determinations were calculated for six main NLP-fractions representing 96 % of the test item. The stability of the test item is found to decrease with increasing pH-value. At pH 4 and 50 °C the substance is found to be stable. Therefore it can be assumed that the substance is also stable at 25 °C and no half-life time and hydrolysis rate were calculated. The half-life time for the substance at pH 7 is 573 days and at pH 9 is 15 days, both at 25 °C.
As the hydrolysis reaction of a NLP is very complex, resulting in a sum of hydrolysis products, a clear identification of the hydrolysis products is complicated. The NLP molecules having different chain lengths even at the different carboxylic acid groups within the same molecule and may hydrolyse following different reaction kinetics. Shorter chain molecules could be already part of the NLP and could also be newly built by hydrolysis of longer chain molecules. These shorter chains may hydrolyse also.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)