Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
Reaction mass of sulfonium, dodecylethyl[1-(2-methoxy-2-oxoethyl)-3-oxo-3-(pentyloxy)propyl]-, tetrafluoroborate(1-)(1:1) and sulfonium, dodecylethyl[3-methoxy-1-(2-methoxy-2-oxoethyl)-3-oxopropyl]-, tetrafluoroborate(1-)(1:1) and sulfonium, dodecylethyl[3-oxo-1-[2-oxo-2-(pentyloxy)ethyl]-3-(pentyloxy)propyl]-, tetrafluoroborate(1-)(1:1)
EC number: 943-993-4 | CAS number: -
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Flammability
Administrative data
- Endpoint:
- flammable solids
- Data waiving:
- study scientifically not necessary / other information available
- Justification for data waiving:
- the study does not need to be conducted because the substance is a liquid
Cross-referenceopen allclose all
- Reason / purpose for cross-reference:
- data waiving: supporting information
Reference
- Endpoint:
- flash point of flammable liquids
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 11 July 2017
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.9 (Flash-Point)
- Deviations:
- no
- GLP compliance:
- yes
- Type of method:
- closed cup
- Flash point apparatus:
- Pensky-Martens apparatus
- Specific details on test material used for the study:
- SOURCE OF TEST MATERIAL
- Lot No.of test material: 624730
- Physical state: clear and viscous liquid with a faint yellow coloring
- Expiration date of the lot/batch: Dec 2017
- Purity: 97.1%
STABILITY AND STORAGE CONDITIONS OF TEST MATERIAL
- Storage condition of test material: room temperature - Key result
- Flash point:
- 150.5 °C
- Atm. press.:
- 101.3 kPa
- Interpretation of results:
- GHS criteria not met
- Conclusions:
- The flash point of MTDID 47403 was 150.5 °C under atmospheric conditions (101.3 kPa) according to EU Method A.9.
- Executive summary:
The flash point of MTDID 47403 was tested using a closed-cup method. The flash point was determined in three runs. The test material ignited at 150 °C but did not ignite at 149.0 °C at 100.1 kPa. The lowest flash point corrected to 101.3 kPa was rounded to the nearest 0.5 °C, and was determined to be 150.5 °C. The study was conducted in accordance with EU Method A.9 and under GLP; therefore the study is considered reliable without restriction.
The study result of 150.0 °C was corrected to 150.3 °C to account for standard barometric pressure and then rounded to 150.5 °C.
- Reason / purpose for cross-reference:
- data waiving: supporting information
Reference
- Endpoint:
- auto-ignition temperature (liquids)
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 20 - 22 Nov 2017
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- guideline study with acceptable restrictions
- Qualifier:
- according to guideline
- Guideline:
- ASTM E659 (Standard test method for autoignition temperature of liquid chemicals)
- Deviations:
- no
- GLP compliance:
- no
- Specific details on test material used for the study:
- SOURCE OF TEST MATERIAL
- Lot No.of test material: 62473
- Physical state: yellow, sticky liquid - Key result
- Auto-ignition temperature:
- >= 247 - <= 250 °C
- Remarks on result:
- other: Pressure not reported
- Conclusions:
- MTDID 47403 was determined to have an auto-flammability temperature of 247-250 °C according to ASTM Method E659.
- Executive summary:
MTDID 47403 was determined to have an auto-flammability temperature of 247-250 °C. The study was conducted in accordance with ASTM Method E659 but was not GLP compliant; therefore, the study is considered reliable with restrictions.
Data source
Materials and methods
Results and discussion
Applicant's summary and conclusion
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.