Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 441-430-2 | CAS number: -
Guidance on Safe Use
Administrative data
First-aid measures
Emergency measure - Inhalation: Remove from exposure area and keep at rest. Seek medical
advice.
Emergency measure - Eyes: Immediately flush eyes with plenty of water for 15 minutes
if contact occurs. It is also recommended that a medical
check is performed.
Emergency measure - Skin: Immediately wash skin with soap and water. If extensive
skin contact occurs, remove contaminated clothing and wash
contacted skin with soap and water. In the unlikely event
that irritation occurs seek medical advice
Emergency measure - Ingestion: Seek medical advice.
Fire-fighting measures
Recommended extinguishing agent: Dry powder, carbon dioxide, alcohol resistant foam or water.
Product arising from burning: The substance is combustible and will burn if involved in a
fire, evolving noxious fumes (eg carbon, oxides and
sodium-containing compounds).
Product determined by test: N
Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.
Accidental release measures
Emergency measures in case of spillage: Evacuate personnel from immediate vicinity.
Wear appropriate personal protective equipment conforming to
the relevant national or international standards as
mentioned in section 2.3.10.
Avoid dust formation by damping down with water. Absorb
spillages of solutions with a suitable inert material (eg
sand or soil). Carefully transfer the spillage to waste
containers, or use a sealed industrial vacuum machine.
Containers filled with waste material must be labelled in
the same way as the original containers.
Clean the spillage area with water and detergent.
Dispose of waste material by incineration or landfill in
accordance with local regulations.
Handling and storage
Handling: The substance should be stored, handled and used in
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid exposure.
Engineering controls are necessary to reduce exposure to the
substance.
When exposure cannot be prevented or adequately controlled
appropriate personal protective equipment should be worn.
Such protective equipment should conform to the appropriate
international or national standards as follows;
Chemical protective gloves to Standard EN374
Chemical resistant clothing to Standard EN368
Eye protection to Standard EN166
When necessary appropriate respiratory protection should be
used. e.g. a dust mask conforming to EN149 FFP1.
The standards mentioned above should be regarded as a
minimum.
Storage: Store in a cool, dry, well-ventilated area.
Keep containers tightly closed when not in use.
Packaging of the substance and or preparation: 20 gallon drums.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Transport code: None.
Transport: Observe and show where possible the warning labels on the
containers. Avoid damaging the containers.
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Stability and reactivity
Danger other than fire: None known.
Chemical reaction with water: None.
Dust explosion: Dust Explosion Risk
Explosion Severity - 20L sphere
Maximum Explosion Pressure (bar) 7.2
Maximum Rate of pressure Rise (bar/s) 545
Kst Value (bar.m/s) 148
Minimum Ignition Energy-(mJ) 100-300
Minimum Ignition Temperature- Dust Cloud (°C) 440-460
Thermal Stability
Bulk Powder Test-Onset Temp. (°C) 151
Air Over Layer Test-Onset Temp (°C) 274
Dust explosion determined by test: Y
Disposal considerations
Industry - Possibility of recovery/recycling: Recycling of uncontaminated material for subsequent use is
recommended.
Industry - Possibility of neutralisation: The dust hazard will be minimised by appropriate storage and
handling techniques.
Industry - Possibility of destruction: controlled discharge: Contaminated containers or spillages of solutions mixed with
inert material (eg sand or soil) may be disposed of by
landfill at an authorised tip in accordance with local
regulations.
Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes (eg carbon oxides
and sodium-containing compounds) could be formed.
Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly to
the sewage system or the aqueous environment. However,
adverse effects on sewage treatment systems would be
unlikely.
Public at large - Possibility of recovery/recycling: Not applicable
Public at large - Possibility of neutralisation: None.
Public at large - Possibility of destruction: controlled discharge: Not applicable.
Public at large - Possibility of destruction - incineration: Not applicable
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
