Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 425-250-1 | CAS number: 147027-10-9
Guidance on Safe Use
Guidance on Safe Use
Currently viewing:
Administrative data
First-aid measures
Emergency measure - Inhalation: Remove to fresh air. If breathing is difficult or ceases,
give oxygen or mouth to mouth resuscitation. Keep warm and
at rest. Obtain medical attention.
Emergency measure - Eyes: Wash thoroughly with water and continue for at least 15
minutes. Seek medical attention.
Emergency measure - Skin: Remove contaminated clothing and launder before re-use.
Thoroughly wash all affected areas with soap and water. Seek
immediate medical attention.
Emergency measure - Ingestion: Wash out mouth and give large quantities of water to drink.
Seek medical attention.
give oxygen or mouth to mouth resuscitation. Keep warm and
at rest. Obtain medical attention.
Emergency measure - Eyes: Wash thoroughly with water and continue for at least 15
minutes. Seek medical attention.
Emergency measure - Skin: Remove contaminated clothing and launder before re-use.
Thoroughly wash all affected areas with soap and water. Seek
immediate medical attention.
Emergency measure - Ingestion: Wash out mouth and give large quantities of water to drink.
Seek medical attention.
Fire-fighting measures
Recommended extinguishing agent: Water spray, foam, carbon dioxide or dry powder may be used.
Product arising from burning: Products of combustion may contain oxides of carbon, sulfur
and nitrogen together with some soot.
Product determined by test: N
Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.
Fight the fire from a safe distance or protected location.
Product arising from burning: Products of combustion may contain oxides of carbon, sulfur
and nitrogen together with some soot.
Product determined by test: N
Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.
Fight the fire from a safe distance or protected location.
Accidental release measures
Emergency measures in case of spillage: Evacuate personnel from immediate vicinity.
Wear an air-fed suit designed to protect the head and skin,
plastic gloves and rubber boots.
Avoid dust formation. Absorb spillages of solutions with a
suitable inert material (eg. sand or soil). Carefully
transfer the spillage to waste containers, or use a sealed
industrial vacuum machine. Containers filled with waste
material must be labelled in the same way as the original
substance containers.
Clean the spillage area with water and detergent. Avoid
washing spillages to the drain.
Dispose of waste material in accordance with local
regulations by incineration, as specified in section 6.1.3.
Wear an air-fed suit designed to protect the head and skin,
plastic gloves and rubber boots.
Avoid dust formation. Absorb spillages of solutions with a
suitable inert material (eg. sand or soil). Carefully
transfer the spillage to waste containers, or use a sealed
industrial vacuum machine. Containers filled with waste
material must be labelled in the same way as the original
substance containers.
Clean the spillage area with water and detergent. Avoid
washing spillages to the drain.
Dispose of waste material in accordance with local
regulations by incineration, as specified in section 6.1.3.
Handling and storage
Handling: The substance should be stored, handled and used under
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid exposure by skin and
eye contact.
The substance may also have a strong explosion potential
when suspended in air. All handling operations should be
conducted so as to minimise the generation of both dust
clouds and electrostatic discharge.
Engineering controls are necessary to reduce exposure to the
substance.
When exposure cannot be prevented or adequately controlled,
appropriate personal protective equipment such as air-fed
protective suit designed to protect head and skin
(CA/25/91), plastic gloves (BS 1651) and rubber boots (BS
1570) should be used.
Storage: Store in a dry well ventilated area at or below room
temperature in clearly labelled sealed containers.
Keep containers tightly closed when not in use.
Packaging of the substance and or preparation: Double polythene bags inside fibre board kegs.
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid exposure by skin and
eye contact.
The substance may also have a strong explosion potential
when suspended in air. All handling operations should be
conducted so as to minimise the generation of both dust
clouds and electrostatic discharge.
Engineering controls are necessary to reduce exposure to the
substance.
When exposure cannot be prevented or adequately controlled,
appropriate personal protective equipment such as air-fed
protective suit designed to protect head and skin
(CA/25/91), plastic gloves (BS 1651) and rubber boots (BS
1570) should be used.
Storage: Store in a dry well ventilated area at or below room
temperature in clearly labelled sealed containers.
Keep containers tightly closed when not in use.
Packaging of the substance and or preparation: Double polythene bags inside fibre board kegs.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Transport code: None
Transport: Avoid crushing the containers. In the event of a spillage,
observe the warning labels on the container.
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Stability and reactivity
Danger other than fire: None known
Chemical reaction with water: None which is hazardous.
Dust explosion: Minimum ignition energy of <1mJ. A suspension of the
substance in air may have a strong explosion potential.
Dust explosion determined by test: Y
Chemical reaction with water: None which is hazardous.
Dust explosion: Minimum ignition energy of <1mJ. A suspension of the
substance in air may have a strong explosion potential.
Dust explosion determined by test: Y
Disposal considerations
Industry - Possibility of recovery/recycling: Discharge to the environment will be minimal. Recovery from
minor spillages or accidental discharge is not economically
or technically feasible, and such waste material will be
disposed of by incineration. In principle, it may be
possible to recover larger spillages of uncontaminated
material for subsequent use.
Industry - Possibility of neutralisation: The notification tests have shown that the substance is
dangerous to the environment.
The potential dust explosion hazard will be reduced by using
appropriate storage and handling procedures to minimise the
generation of both dust clouds and electrostatic discharge.
No chemical treatment is practicable to neutralise the
hazardous environmental properties.
Industry - Possibility of destruction: controlled discharge: Contaminated containers or spillages of solutions mixed with
inert material (eg. sand or soil) will be disposed of by
incineration.
Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes (eg. carbon,
nitrogen and sulphur oxides) could be formed.
Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly to
the sewage system or the aqueous environment. However,
adverse effects on sewage treatment systems would be
unlikely.
Public at large - Possibility of recovery/recycling: Not applicable since the substance will not become available
to the public at large.
minor spillages or accidental discharge is not economically
or technically feasible, and such waste material will be
disposed of by incineration. In principle, it may be
possible to recover larger spillages of uncontaminated
material for subsequent use.
Industry - Possibility of neutralisation: The notification tests have shown that the substance is
dangerous to the environment.
The potential dust explosion hazard will be reduced by using
appropriate storage and handling procedures to minimise the
generation of both dust clouds and electrostatic discharge.
No chemical treatment is practicable to neutralise the
hazardous environmental properties.
Industry - Possibility of destruction: controlled discharge: Contaminated containers or spillages of solutions mixed with
inert material (eg. sand or soil) will be disposed of by
incineration.
Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes (eg. carbon,
nitrogen and sulphur oxides) could be formed.
Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly to
the sewage system or the aqueous environment. However,
adverse effects on sewage treatment systems would be
unlikely.
Public at large - Possibility of recovery/recycling: Not applicable since the substance will not become available
to the public at large.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
