Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 293-693-6 | CAS number: 91081-84-4 By-product, containing primarily carbohydrates, produced by an ethanolic extraction of defatted soybean meal.
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Flammability
Administrative data
Link to relevant study record(s)
- Endpoint:
- flammable solids
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 20 February 2018
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.10 (Flammability (Solids))
- Version / remarks:
- 2008
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Key result
- Test procedure:
- burning rate test: preliminary screening test
- Remarks on result:
- substance does not ignite and propagate combustion either by burning with flame or smouldering along 200 mm of the powder train within the 2 minutes test period
- Interpretation of results:
- other: No classified in accordance with EU criteria
- Conclusions:
- Under the conditions of this study, the test material has been determined to be not highly flammable as it did not propagate combustion over the 200 mm of the preliminary screening test in under 4 minutes.
- Executive summary:
The flammability of the test material was investigated in accordance with the standardised guideline EU Method A.10, under GLP conditions.
A mould (250 mm long x 20 mm wide x 10 mm high) was loosely filled with test material (tested as received) (previously ground in a pestle and mortar). A non-combustible, non-porous board was placed onto the mould which was then inverted. The mould was removed and an air-rich Bunsen burner flame applied to one end of the pile until ignition occurred; the time taken to propagate 200 mm was recorded.
Under the conditions of this study, the test material has been determined to be not highly flammable as it did not propagate combustion over the 200 mm of the preliminary screening test in under 4 minutes.
- Endpoint:
- substances / mixtures which in contact with water emit flammable gases
- Data waiving:
- study scientifically not necessary / other information available
- Justification for data waiving:
- other:
- Endpoint:
- pyrophoric solids
- Data waiving:
- study scientifically not necessary / other information available
- Justification for data waiving:
- other:
Referenceopen allclose all
Preliminary Screening
- The pile ignited on application of the air-rich Bunsen burner; however the flame failed to propagate combustion and self-extinguished.
- The result of the preliminary screening test obviated the need to perform the main test.
Description of key information
Flammability (Solids)
Under the conditions of this study, the test material has been determined to be not highly flammable as it did not propagate combustion over the 200 mm of the preliminary screening test in under 4 minutes.
In accordance with Section 1 of Annex XI of Regulation (EC) No. 1907/2006 (REACH), it is considered justified to omit the Flammability (Contact with Water) and Pyrophoric Properties of Solids and Liquids studies, also required under section 7.10 of Annex VII, on the basis that the testing does not appear to be scientifically necessary. Experience of handling the material and the known chemical and physical properties of the substance suggest that it is not pyrophoric and is not flammable in contact with water.
Key value for chemical safety assessment
- Flammability:
- not classified
Additional information
Flammability (Solids)
The flammability of the test material was investigated in accordance with the standardised guideline EU Method A.10, under GLP conditions. The study was awarded a reliability score of 1 in accordance with the criteria set forth by Klimisch et al. (1997).
A mould (250 mm long x 20 mm wide x 10 mm high) was loosely filled with test material (tested as received) (previously ground in a pestle and mortar). A non-combustible, non-porous board was placed onto the mould which was then inverted. The mould was removed and an air-rich Bunsen burner flame applied to one end of the pile until ignition occurred; the time taken to propagate 200 mm was recorded.
Under the conditions of this study, the test material has been determined to be not highly flammable as it did not propagate combustion over the 200 mm of the preliminary screening test in under 4 minutes.
In accordance with Section 1 of Annex XI of Regulation (EC) No. 1907/2006 (REACH), it is considered justified to omit the Flammability (Contact with Water) and Pyrophoric Properties of Solids and Liquids studies, also required under section 7.10 of Annex VII, on the basis that the testing does not appear to be scientifically necessary. Experience of handling the material and the known chemical and physical properties of the substance suggest that it is not pyrophoric and is not flammable in contact with water.
Justification for classification or non-classification
In accordance with the criteria for classification as defined in Annex I, Regulation (EC) No 1272/2008, the substance does not require classification with respect to flammability.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.