Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove to fresh air. Symptomatic treatment. Seek immediate
medical attention.
Emergency measure - Eyes: Flush immediately with plenty of water for at least 15
minutes, holding eyelids open. If irritation persists seek
medical advice.
Emergency measure - Skin: Remove contaminated clothing. Wash affected areas with soap
and plenty of water.
Emergency measure - Ingestion: Rinse mouth thoroughly with water if conscious and not
convulsing. Seek immediate medical attention.

Fire-fighting measures

Recommended extinguishing agent: water spray, carbon dioxide, dry chemical powder, foam

Product arising from burning: The substance is combustible and will burn if involved in a
fire, evolving noxious fumes (eg oxides of carbon and
nitrogen).

Product determined by test: N

Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.


Fight the fire from a safe distance or protected location.

Accidental release measures

Emergency measures in case of spillage: Evacuate personnel from immediate vicinity.


Wear appropriate personal protective equipment conforming to
the relevant national or international standards, as
mentioned in section 2.3.10.


Absorb spillages with a suitable inert material (eg. sand or
soil). Carefully transfer the spillage to waste containers,
or use a sealed industrial vacuum machine. Containers filled
with waste material must be labelled in the same way as the
original substance containers.


Clean the spillage area with water spray, avoiding release
of washings to drain.


Dispose of waste material in accordance with local
regulations by incineration.

Handling and storage

Handling: The substance should be stored, handled and used under
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid exposure.


Engineering controls are necessary to reduce exposure to the
substance.


When exposure cannot be prevented or adequately controlled
appropriate personal protective equipment should be worn.

Such protective equipment should conform to the appropriate
international or national standards as follows;

Chemical protective gloves to Standard prEN374

Chemical protective clothing to Standard EN368

Eye protection to Standard prEN166.

Furthermore, when respiratory protective equipment has to be
used, it must be capable of adequately controlling exposure,
be suitable for the purpose, and conform to the appropriate
international or national standards, such as an organic
vapour mask conforming to EN405 FFA1.


These measures should be regarded as a minimum.

Storage: Store in suitable, labelled containers in a cool, dry place
away from sources of ignition.


Keep containers tightly closed when not in use.

Packaging of the substance and or preparation: Metal drums with inner coating.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Remarks
Transport code: UN No. 2922
Transport: Avoid crushing the containers. In the event of a spillage,
observe the warning labels on the container.


ADR/RID: corrosive liquid N.O.S.

Class: 8,76°C


IMDG: corrosive liquid N.O.S.

Class 8

Packing group II


IATA: corrosive liquid N.O.S.

Class 8

Packing group II
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None known

Chemical reaction with water: None

Dust explosion: Not applicable

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Discharge to the environment will be minimal. Recovery from
minor spillages or accidental discharge is not economically
or technically feasible, and such waste material will be
disposed of by incineration. In principle, it may be
possible to recover larger spillages of uncontaminated
material for subsequent use.

Industry - Possibility of neutralisation: No chemical treatment is practicable to neutralise the
hazardous health or environmental properties.

Industry - Possibility of destruction: controlled discharge: Contaminated drums should be rinsed and washed out before
recycling, or otherwise be incinerated. Spillages of the
substance mixed with inert material should be incinerated.

Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes (eg. carbon and
nitrogen oxides) could be formed.

Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly to
the sewage system or the aqueous environment. Effects on
sewage treatment systems are unknown.

Public at large - Possibility of recovery/recycling: Not applicable.

Public at large - Possibility of neutralisation: Not applicable.

Public at large - Possibility of destruction: controlled discharge: Not applicable.

Public at large - Possibility of destruction - incineration: Not applicable.

Public at large - Possibility of destruction - water purification: Not applicable.