Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 433-530-1 | CAS number: 143446-73-5
Guidance on Safe Use
Administrative data
First-aid measures
Emergency measure - Inhalation: In case of inhalation, remove patient to fresh air. If not
breathing give artificial respiration. If breathing is
difficult give oxygen.
Emergency measure - Eyes: In case of eye contact, rinse immediately with plenty of
water and seek medical advice.
Emergency measure - Skin: In case of contact with skin, wash with copious amounts of
water.
Emergency measure - Ingestion: Seek medical advice.
Fire-fighting measures
Recommended extinguishing agent: Water spray, dry chemical powder, carbon dioxide or foam may
be used.
Product arising from burning: The substance is combustible and will burn if involved in a
fire, evolving noxious fumes (eg carbon and sulfur oxides).
However, there is no experimental evidence to support the
anticipated combustion products.
Product determined by test: N
Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.
Accidental release measures
Emergency measures in case of spillage: Evacuate personnel from immediate vicinity.
Wear appropriate personal protective equipment conforming to
the relevant national or international standards as
mentioned in section 2.3.10.
Absorb spillages of solutions with a suitable inert material
(eg sand or soil). Carefully transfer the spillage to waste
containers, or use a sealed industrial vacuum machine.
Containers filled with waste material must be labelled in
the same way as the original containers.
Clean the spillage area with water and detergent.
Dispose of waste material by incineration in accordance with
local regulations.
Handling and storage
Handling: To transfer the substance from its drum to the reactor, a
open proper system is used without possibility of spillages.
This process takes less than 60 minutes for each 140 kg
batch.
Engineering controls are necessary to reduce exposure to the
substance.
When exposure cannot be prevented or adequately controlled
appropriate personal protective equipment should be worn.
Such protective equipmemt should conform to the appropriate
European and Italian standards.
The standards mentioned above should be regarded as a
minimum.
Storage: Store in a cool, dry, well-ventilated area, protected from
heat sources.
Keep containers tightly closed when not in use.
Packaging of the substance and or preparation: 210 litre polyethylene drums of a thickness greater than 3.5
mm with screw caps.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Transport code: None.
Transport: None.
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Stability and reactivity
Danger other than fire: None reported.
Chemical reaction with water: None reported which is hazardous.
Dust explosion: Not applicable as the substance is a liquid.
Dust explosion determined by test: N
Disposal considerations
Industry - Possibility of recovery/recycling: Discharge to the environment will be minimal. Recovery from
minor spillages or accidental discharge is not economically
or technically feasible, and such waste material will be
disposed of by incineration. In principle, it may be
possible to recover larger spillages of uncontaminated
material for subsequent use.
Industry - Possibility of neutralisation: No chemical treatment is practicable to neutralise the
hazardous health or environmental properties.
Industry - Possibility of destruction: controlled discharge: Contaminated containers or spillages of solutions mixed with
inert material (eg sand or soil) should not be disposed of
by landfill.
Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes (eg carbon and
sulfur oxides) could be formed.
Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly to
the sewage system or the aqueous environment. However,
adverse effects on sewage treatment systems would be
unlikely.
Industry - Possibility of destruction - other: None.
Public at large - Possibility of recovery/recycling: Not applicable as the substance will not enter the public
domain.
Public at large - Possibility of neutralisation: Not applicable.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
